Dear Developers, As Niti instructed me, I tried to locate the openvswitch.ko file in my OVS directory and could not find it. Can you please help me in identifying why I cannot locate that file on my OVS directory?
Best Regards, Ashish Kurian On Wed, Sep 14, 2016 at 1:32 PM, niti Rohilla <niti1...@gmail.com> wrote: > Hi Ashish, > > After compilation you have to load the ovs kernel module. > > U can follow these steps: > 1) Find the location of openvswitch.ko file in your openvswitch directory. > It might be in this location datapath/linux/openvswitch.ko in ovs directory. > > 2) Use the command to find the location of openvswitch.ko in your linux > system: > > - > > /sbin/modinfo openvswitch > > 3) Replace the file in step 2 with file in step 1. > > For example, > > cp datapath/linux/openvswitch.ko /lib/modules/3.2.0-57-generic- > pae/updates/dkms/openvswitch.ko > > 4) make modules_install > > Hope it helps. > > > Thanks > > Niti Rohilla > > > On Sep 14, 2016 4:52 PM, "Ashish Kurian" <ashish...@gmail.com> wrote: > >> Dear Niti, >> >> I used the commands that you suggested and I got the following error >> >> ¨failed to add gtp0 as port: Address family not supported by protocol¨ >> >> Do you know what could be the reason for this error? >> >> Best Regards, >> Ashish Kurian >> >> On Tue, Sep 13, 2016 at 9:24 AM, niti Rohilla <niti1...@gmail.com> wrote: >> >>> Hi Ashish, >>> >>> I would recommend you to refer the 3GPP GTP-U specifications. >>> http://www.arib.or.jp/IMT-2000/V720Mar09/5_Appendix/Rel8/29/ >>> 29281-800.pdf >>> >>> First you need to compile your code and load the openvswitch kernel >>> module. >>> >>> U can use the following command to create a GTP-U tunnel: >>> >>> - >>> >>> ovs-vsctl add-port br2 gtp0 -- set interface gtp0 type=gtp >>> options:remote_ip=flow options:key=flow >>> >>> I hope it helps and if you are planning to submit the code then please >>> don't strip the signed-off part so that people can still refer to me or >>> Saloni in case of problems. >>> >>> >>> Thanks >>> >>> Niti >>> >>> >>> On Tue, Sep 6, 2016 at 2:34 PM, Ashish Kurian <ashish...@gmail.com> >>> wrote: >>> >>>> Dear Niti, >>>> >>>> Thank you very much for your reply. I have already asked in the open >>>> source community and all what I get as reply is that "no body is working on >>>> it right now and I must contact the author of the patch". >>>> >>>> So far I have installed the patch and fixed two errors that came up >>>> when I did the OVS test command. My next step is to evaluate the >>>> functionalities of the patch. But I do not have a clue how to give the >>>> ofctl commands matching gtp parameters. There must be some other >>>> documentation that TCS has prepared regarding this patch. >>>> >>>> If you are not aware of the documentation, can you please lead me to >>>> others from your team that worked on this project. Please understand that >>>> there is not much help available online as of now for this patch >>>> implementation. >>>> >>>> My next goal is to identify how to test this patch. Has your team >>>> already tested this patch and if so did you have some results of the test. >>>> >>>> I have even tried to contact Saloni Jain regarding the same. Please >>>> understand my situation and any help would be much appreciated. >>>> >>>> Best Regards, >>>> Ashish Kurian >>>> >>>> On Tue, Sep 6, 2016 at 6:28 AM, niti Rohilla <niti1...@gmail.com> >>>> wrote: >>>> >>>>> Hi Ashish, >>>>> >>>>> I have moved out of this project long time back. I would recommend you >>>>> to send a mail to the opensource community so that the current stakeholder >>>>> can help you. >>>>> >>>>> Thanks & Regards >>>>> Niti Rohilla >>>>> >>>> >>>> >>> >> _______________________________________________ dev mailing list dev@openvswitch.org http://openvswitch.org/mailman/listinfo/dev
