Hi Daniel Lavine,
when deploying openwhisk on kubernetes, if a job runs on openwhisk , how to
alloc and free resource , openwhisk is a manager or kubernetes is a manager?
if there are too many jobs ,how to load balance? how to span job to other
node? restart openwhisk components or restart jobs thread?
Best regards,
Zhang Haiyong
-----原始邮件-----
发件人:"张海勇" <[email protected]>
发送时间:2017-07-10 17:51:30 (星期一)
收件人: "张海勇" <[email protected]>, "Daniel Lavine" <[email protected]>
抄送: "Daniel Lavine" <[email protected]>, [email protected]
主题: Re: issue about invoker
Hi Daniel Lavine,
I add invoker to the script file .travis/build.sh
kubectl apply -f configure/configure_whisk.ym
#setup invoker
kubectl apply -f ansible/environments/kube/files/invoker-service.yml
kubectl apply -f ansible/environments/kube/files/invoker.yml
The controller is failed to connect to invoker with the image
adobeapiplatform/whisk-invoker
[2017-07-10T09:33:31.771Z] [INFO] [#tid_40] [ActionsApi] action activation id:
61551b15635f43268c31cd708db1966d [marker:controller_loadbalancer_start:22]
[2017-07-10T09:33:31.775Z] [ERROR] [#sid_121] [LoadBalancerService] all
invokers down
[2017-07-10T09:33:31.775Z] [ERROR] [#tid_40] [ActionsApi] [POST] action
activation failed: no invokers available
[2017-07-10T09:33:31.779Z] [INFO] [#tid_40] [BasicHttpService]
[marker:http_post.500_count:31:31]
The controller is setup successfully with the image openwhisk/invoker
[2017-07-10T09:41:35.452Z] [INFO] [#sid_120] [LoadBalancerService] test action
for invoker health now exists
[2017-07-10T09:41:35.502Z] [INFO] Bound to /0.0.0.0:8080
[2017-07-10T09:41:35.515Z] [INFO] [#sid_120] [CouchDbRestStore] [PUT]
'openwhisk_kube_whisks' completed document: 'id:
whisk.system/invokerHealthTestAction, rev: null', response:
'{"ok":true,"id":"whisk.system/invokerHealthTestAction","rev":"1-6e6565bab3cb9030d9d2df48413a688c"}'
[marker:database_saveDocument_finish:1581:78]
[2017-07-10T09:41:35.522Z] [INFO] [#sid_120] [WhiskAction] write all done,
caching id: whisk.system/invokerHealthTestAction Cached
[2017-07-10T09:41:35.523Z] [INFO] [#sid_130] [RateThrottler] actions per
minute: maxPerMinute = 120
[2017-07-10T09:41:35.523Z] [INFO] [#sid_130] [RateThrottler] triggers per
minute: maxPerMinute = 60
[2017-07-10T09:41:35.524Z] [INFO] [??] [ActivationThrottler] concurrencyLimit =
100, systemOverloadLimit = 5000
[2017-07-10T09:41:35.606Z] [INFO] [??] [ActionsApi] actionSequenceLimit '50'
But the invoker is not configured
kubectl -n openwhisk logs invoker-0
[2017-07-10T09:42:35.001Z] [INFO] Slf4jLogger started
[2017-07-10T09:42:35.044Z] [INFO] [??] [Config] environment set value for
consulserver.host
[2017-07-10T09:42:35.046Z] [INFO] [??] [Config] environment set value for
self.docker.endpoint
[2017-07-10T09:42:35.046Z] [INFO] [??] [Config] environment set value for
consul.host.port4
[2017-07-10T09:42:35.046Z] [INFO] [??] [Config] environment set value for port
[2017-07-10T09:42:35.047Z] [INFO] [??] [WhiskConfig] reading properties from
consul at consul.openwhisk:8500
[2017-07-10T09:42:36.078Z] [ERROR] [??] [Config] required property
invoker.instances still not set
[2017-07-10T09:42:36.079Z] [ERROR] [??] [Invoker] Bad configuration, cannot
start.
How to config the invoker ?
Best regards,
Zhang Haiyong
-----原始邮件-----
发件人:"张海勇" <[email protected]>
发送时间:2017-07-10 14:09:39 (星期一)
收件人: "Daniel Lavine" <[email protected]>
抄送:[email protected]
主题: issue about invoker
Hi Daniel Lavine,
I set up some components successfully , but there is no invoker component.
so I install it by hand like this:
kubectl apply -f environments/kube/files/invoker.yml
when I run "wsk -i action invoke hello"
there is an error like this:
error: Unable to invoke action 'hello1': There was an internal server error.
(code 15)
I check the log by cli "kubectl -n openwhisk logs invoker-0":
[2017-07-10T03:58:06.929Z] [INFO] Slf4jLogger started
[2017-07-10T03:58:06.961Z] [INFO] [??] [Config] environment set value for
consulserver.host
[2017-07-10T03:58:06.963Z] [INFO] [??] [Config] environment set value for
self.docker.endpoint
[2017-07-10T03:58:06.963Z] [INFO] [??] [Config] environment set value for
consul.host.port4
[2017-07-10T03:58:06.963Z] [INFO] [??] [Config] environment set value for port
[2017-07-10T03:58:06.963Z] [INFO] [??] [WhiskConfig] reading properties from
consul at consul.openwhisk:8500
[2017-07-10T03:58:07.888Z] [ERROR] [??] [Config] required property
whisk.api.host still not set
How can I fix this issue about required property whisk.api.host still not set?
notes: invoker image is adobeapiplatform/whisk-invoker, the openwhisk/invoker
image seems not work well
Best regards,
Zhang Haiyong
-----原始邮件-----
发件人:"张海勇" <[email protected]>
发送时间:2017-07-05 15:36:59 (星期三)
收件人: "Daniel Lavine" <[email protected]>
抄送:[email protected]
主题: isuue about deployment without ansible
Hi Daniel Lavine,
when I set up Kubernetes environment , just run
1. kubectl apply -f environments/kube/files/xxx.yml
2. kubectl apply -f environments/kube/files/xxx-service.yml
Can I deploy XXX component successfully instead of run "ansible-playbook -i
environments/kube openwhisk.yml"?
Best regards,
Zhang Haiyong
-----原始邮件-----
发件人:"张海勇" <[email protected]>
发送时间:2017-07-05 15:04:19 (星期三)
收件人: "Daniel Lavine" <[email protected]>
抄送:[email protected]
主题: issue about mountPath
Hi Daniel Lavine,
When I deploy components such as consul nginx by CLI "ansible-playbook -i
environments/kube openwhisk.yml"，
there are some mountPath in the yml config file , where can I get these files ?
for example: nginx
best regards,
Zhang Haiyong
-----原始邮件-----
发件人:"Daniel Lavine" <[email protected]>
发送时间:2017-06-23 00:12:21 (星期五)
收件人: "张海勇" <[email protected]>
抄送:[email protected]
主题: Re: issue about Image danlavine/whisk_config:v1.5.6
Hey Zhanghaiyong,
For theses types of issues, I would open up an issue against the github repo
directly so that it can be better addressed by the people who know most about
that code base. Also, we would be able to integrate any code changes that might
need to happen. That being said, I would take a look at these instructions
https://github.com/apache/incubator-openwhisk-deploy-kube#configure-openwhisk.
Whenever deploying Docker images --> Kubernetes Pods you should always be using
the Kubernetes cli "kubectl", not Docker commands directly.
git repo: https://github.com/apache/incubator-openwhisk-deploy-kube/issues
Thanks,
Dan Lavine
张海勇 ---06/22/2017 07:36:07 AM---Hi Daniel Lavine, I am a learner about
deploying openwhisk on kubernetes, when I run the script
From: 张海勇 <[email protected]>
To: [email protected]
Cc: [email protected]
Date: 06/22/2017 07:36 AM
Subject: issue about Image danlavine/whisk_config:v1.5.6
Hi Daniel Lavine,
I am a learner about deploying openwhisk on kubernetes, when I run the script
$TRAVIS_KUBE_VERSION=v1.5.6 TRAVIS_ETCD_VERSION=v3.0.14 ./setup.sh
$TRAVIS_KUBE_VERSION=v1.5.6 ./build.sh
$kubectl -n openwhisk logs configure-openwhisk-xxxxx
there is no log , then I download the image whisk_config:v1.5.6, and run
$docker run danlavine/whisk_config:v1.5.6
/incubator-openwhisk-deploy-kube/configure/configure.sh
and noted that the command kubectl did not run successfully, the log is as
below:
The connection to the server localhost:8080 was refused - did you specify the
right host or port?
so I think the kubernetes environments in the image
(danlavine/whisk_config:v1.5.6) is not complete.
need you to confirm , thanks !
Best regards,
zhanghaiyong
