2019-04-10 05:48:33 UTC - Raja Mahali: @Rodric Rabbah @Carlos Santana - Thank you for the inputs and suggestions. I am actually drafting a security compliance document and i will be recording these inputs and take it further with our internal review board for sign off.Once it is done, i will take it to apache project repo for the benefit of other's.
1) secured Logging - I need to understand how to enable logging for OW for the debug purpose and is there any parameter that needs to be set for securing this logging mechanism. 2) @Rodric Rabbah - while you were mentioned about firewall rules and ports for OW, could you please share those details , so that it can be well documented. 3) With respect to encryption at rest and motion query - you guys have mentioned it would be kafka and couch DB for rest, but any document or reference link is there to implement it ? - Also, Encryption at motion is i believe still remain <http://unanswered.It|unanswered.It> would be helpful if we can get some inputs on the same. https://openwhisk-team.slack.com/archives/C3TPCAQG1/p1554875313127200?thread_ts=1554788725.103400&cid=C3TPCAQG1 ---- 2019-04-10 06:07:15 UTC - Raja Mahali: @Rodric Rabbah - Any reference links for the above will be more helpful for us to have it implemented accordingly. https://openwhisk-team.slack.com/archives/C3TPCAQG1/p1554876435127500?thread_ts=1554788725.103400&cid=C3TPCAQG1 ---- 2019-04-10 06:58:41 UTC - owen: hello, I'm new here and would like to be a contributor to OpenWhisk, can anyone please add me into OpenWhisk project space in Confluence? my account name is owensun, thanks! wave : James Thomas, Rodric Rabbah, mmarth https://openwhisk-team.slack.com/archives/C3TPCAQG1/p1554879521128900?thread_ts=1554879521.128900&cid=C3TPCAQG1 ---- 2019-04-10 09:00:06 UTC - James Thomas: ^^ @Matt Rutkowski https://openwhisk-team.slack.com/archives/C3TPCAQG1/p1554886806130100 ---- 2019-04-10 10:49:15 UTC - Rodric Rabbah: Welcome, Owen. Have you submitted an Apache CLA? <https://github.com/apache/incubator-openwhisk/blob/master/CONTRIBUTING.md> https://openwhisk-team.slack.com/archives/C3TPCAQG1/p1554893355131000?thread_ts=1554879521.128900&cid=C3TPCAQG1 ---- 2019-04-10 13:28:55 UTC - Matt Rutkowski: @owen added your id to the CWIki; looking forward to your contributions! https://openwhisk-team.slack.com/archives/C3TPCAQG1/p1554902935131900 ---- 2019-04-10 14:11:48 UTC - owen: @Matt Rutkowski thank you! +1 : Matt Rutkowski https://openwhisk-team.slack.com/archives/C3TPCAQG1/p1554905508132300 ---- 2019-04-10 14:12:33 UTC - owen: let me submit it https://openwhisk-team.slack.com/archives/C3TPCAQG1/p1554905553132500?thread_ts=1554879521.128900&cid=C3TPCAQG1 ---- 2019-04-10 14:23:07 UTC - Ali Tariq: hi guys, i need some help regarding kube deployment of openwhisk. I started with a kubeadm-dind-cluster for openwhisk and it worked fine but when i tried to do a manual multi-node cluster deployment it didn't work (by that i mean, installation did not complete successfully - attaching the picture). I am not sure if the mycluster.yaml file used was correct or not, so i will be attaching that along. Any help would be appreciated! https://openwhisk-team.slack.com/archives/C3TPCAQG1/p1554906187137600?thread_ts=1554906187.137600&cid=C3TPCAQG1 ---- 2019-04-10 14:25:59 UTC - Ali Tariq: here is the mycluster.yaml yaml file https://openwhisk-team.slack.com/archives/C3TPCAQG1/p1554906359137900?thread_ts=1554906187.137600&cid=C3TPCAQG1 ---- 2019-04-10 15:47:56 UTC - Dave Grove: it looks like the init-couchdb job failed the first time it was run, then succeeded the second time. Depending on what happened when it ran the first time, that could be fine. However it looks like you have no invokers. Did you label any invoker nodes in your multi-node cluster? The lack of invokers is why the install-packages job hasn’t run. It waits for the controller to report at least 1 healthy invoker before it starts https://openwhisk-team.slack.com/archives/C3TPCAQG1/p1554911276140700 ---- 2019-04-10 15:49:11 UTC - Rodric Rabbah: calling PPMC members - the openwhisk go runtime needs one more vote from a ppmc member to pass. https://openwhisk-team.slack.com/archives/C3TPCAQG1/p1554911351141400 ---- 2019-04-10 16:25:22 UTC - Rodric Rabbah: just need one more ppmc member to run ``` rcverify.sh openwhisk-runtime-go 'OpenWhisk Runtime Go' 1.13.0-incubating rc2 ``` and reply to the vote thread https://openwhisk-team.slack.com/archives/C3TPCAQG1/p1554913522142000?thread_ts=1554913522.142000&cid=C3TPCAQG1 ---- 2019-04-10 16:28:46 UTC - Dragos Dascalita Haut: I'll be on this shortly @Rodric Rabbah. https://openwhisk-team.slack.com/archives/C3TPCAQG1/p1554913726142300?thread_ts=1554913522.142000&cid=C3TPCAQG1 ---- 2019-04-10 16:29:34 UTC - Rodric Rabbah: thanks Dragos https://openwhisk-team.slack.com/archives/C3TPCAQG1/p1554913774142500?thread_ts=1554913522.142000&cid=C3TPCAQG1 ---- 2019-04-10 16:38:47 UTC - Rodric Rabbah: the voting is now closed, thanks for everyone that participated. https://openwhisk-team.slack.com/archives/C3TPCAQG1/p1554914327143200 ---- 2019-04-10 16:54:41 UTC - James Thomas: who has the auth to access webhooks urls for this slack? need to get a webhook for enabling on a new apache repo i’m setting up https://openwhisk-team.slack.com/archives/C3TPCAQG1/p1554915281143900 ---- 2019-04-10 16:55:04 UTC - Rodric Rabbah: ill send you ones i recently created +1 : James Thomas https://openwhisk-team.slack.com/archives/C3TPCAQG1/p1554915304144200 ---- 2019-04-10 17:26:32 UTC - Ali Tariq: @Dave Grove "it looks like the init-couchdb job failed the first time it was run, then succeeded the second time. Depending on what happened when it ran the first time, that could be fine. However it looks like you have no invokers. Did you label any invoker nodes in your multi-node cluster? The lack of invokers is why the install-packages job hasn’t run. It waits for the controller to report at least 1 healthy invoker before it starts" https://openwhisk-team.slack.com/archives/C3TPCAQG1/p1554917192144400?thread_ts=1554906187.137600&cid=C3TPCAQG1 ---- 2019-04-10 17:27:28 UTC - Ali Tariq: yes i did! - i had 3 nodes in total, 1 master and two worker. I labeled 1 worker as invoker and the other worker as core. https://openwhisk-team.slack.com/archives/C3TPCAQG1/p1554917248144600?thread_ts=1554906187.137600&cid=C3TPCAQG1 ---- 2019-04-10 17:42:17 UTC - Dave Grove: you are right. I missed the invoker-pod. Was looking for the invoker DaemonSet. Can you get the logs for the install-packages job to see why it hasn’t completed? https://openwhisk-team.slack.com/archives/C3TPCAQG1/p1554918137144800?thread_ts=1554906187.137600&cid=C3TPCAQG1 ---- 2019-04-10 18:21:27 UTC - Ali Tariq: The setup is no longer running since it was instantiated on cloudLab - but i ll start it again, check the logs and update you (i had an impression that mycluster.yaml file is the issue thats why i wanted to double check). https://openwhisk-team.slack.com/archives/C3TPCAQG1/p1554920487145000?thread_ts=1554906187.137600&cid=C3TPCAQG1 ----
