Hello Chris.
It's me again, :-)
You have an example that shows that the "typeSwitch" tab allows an internal
"typeSwitch" tab as presented.
I have tried many combinations and it does not work for me.
Thanking you for your help,
El lun., 15 jun. 2020 a las 3:21, Christofer Dutz (<
christofer.d...@c-ware.de>) escribió:
> Hi Cesar,
>
> I just noticed your discriminated types in [2] don't have names ... as for
> every case in the typeSwitch a new type is generated, you need to give them
> names.
> Please try that and check if the error goes away.
>
> Chris
>
>
> Am 14.06.20, 17:59 schrieb "Cesar Garcia" <cesar.gar...@ceos.com.ve>:
>
> Very grateful for your prompt response,
>
> Corrected at point [1]
>
> Unfortunately, the build process still fails when I add the
> 'typeSwitch' in
> the structure as shown in [2],
>
> I attach the message of error in [3].
>
> Thank you very much for any help you can provide,
>
> Best regards,
>
>
> [1]
> [discriminatedType 'S7Payload' [uint 8 'messageType', S7Parameter
> 'parameter']
> [typeSwitch 'parameter.discriminatorValues[0]', 'messageType'
> ['0x04','0x03' S7PayloadReadVarResponse
> [array S7VarPayloadDataItem 'items' count 'CAST(parameter,
> S7ParameterReadVarResponse).numItems' ['lastItem']]
> ]
> ['0x05','0x01' S7PayloadWriteVarRequest
> [array S7VarPayloadDataItem 'items' count
> 'COUNT(CAST(parameter, S7ParameterWriteVarRequest).items)'
> ['lastItem']]
> ]
> ['0x05','0x03' S7PayloadWriteVarResponse
> [array S7VarPayloadStatusItem 'items' count
> 'CAST(parameter,
> S7ParameterWriteVarResponse).numItems']
> ]
> ['0x00','0x07' S7PayloadUserData
> * [array S7PayloadUserDataItem 'items' count
> 'COUNT(CAST(parameter, S7ParameterUserData).items)'
> ['CAST(CAST(parameter,
> S7ParameterUserData).items[0],
>
> S7ParameterUserDataItemCPUFunctions).cpuFunctionType','CAST(CAST(parameter,
> S7ParameterUserData).items[0],
> S7ParameterUserDataItemCPUFunctions).cpuSubfunction'*]]
> ]
> ]
> ]
>
> [2]
> [discriminatedType 'S7PayloadUserDataItem' [uint 4 'cpuFunctionType',
> uint
> 8 'cpuSubfunction']
> [enum DataTransportErrorCode 'returnCode']
> [enum DataTransportSize 'transportSize']
> [implicit uint 16 'dataLength' 'lengthInBytes - 4']
> [typeSwitch 'cpuSubfunction'
> ['0x01'
> [simple SzlId 'szlId']
> [simple uint 16 'szlIndex']
> [typeSwitch 'cpuFunctionType'
> ['0x04' S7PayloadUserDataItemCpuFunctionReadSzlRequest
> ]
> ['0x08' S7PayloadUserDataItemCpuFunctionReadSzlResponse
> [const uint 16 'szlItemLength' '28']
> [implicit uint 16 'szlItemCount' 'COUNT(items)']
> [array SzlDataTreeItem 'items' count
> 'szlItemCount']
> ]
> ]
> ]
> ['0x02'
> * [simple uint 16 'Mode']*
> ]
> ]
> ]
>
>
> [3]
>
> --- plc4x-maven-plugin:1.2.0:generate-driver (generate-driver) @
> plc4j-driver-s7 ---
> Generating type DataItem
> Generating type COTPParameterDisconnectAdditionalInformation
> Generating type S7PayloadWriteVarRequest
>
> ------------------------------------------------------------------------
> BUILD FAILURE
>
> ------------------------------------------------------------------------
> Total time: 2.220 s
> Finished at: 2020-06-14T11:27:37-04:00
>
> ------------------------------------------------------------------------
> Failed to execute goal
> org.apache.plc4x.plugins:plc4x-maven-plugin:1.2.0:generate-driver
> (generate-driver) on project plc4j-driver-s7: Error generating sources:
> Error generating output for type 'S7PayloadWriteVarRequest': Java
> method
>
> "org.apache.plc4x.language.java.JavaLanguageTemplateHelper.getArgumentType(org.apache.plc4x.plugins.codegenerator.types.references.TypeReference,
> int)" threw an exception when invoked on
> org.apache.plc4x.language.java.JavaLanguageTemplateHelper object
> "org.apache.plc4x.language.java.JavaLanguageTemplateHelper@5fa0141f";
> see
> cause exception in the Java stack trace.
>
> ----
> FTL stack trace ("~" means nesting-related):
> - Failed at: ${helper.getArgumentType(field.type, ... [in template
> "templates/java/io-template.ftlh" at line 136, column 248]
> ----: Could not find definition of complex type S7VarPayloadDataItem
> -> [Help 1]
>
> To see the full stack trace of the errors, re-run Maven with the -e
> switch.
> Re-run Maven using the -X switch to enable full debug logging.
>
> For more information about the errors and possible solutions, please
> read
> the following articles:
> [Help 1]
>
> http://cwiki.apache.org/confluence/display/MAVEN/MojoExecutionException
>
>
>
>
> El dom., 14 jun. 2020 a las 5:05, Christofer Dutz (<
> christofer.d...@c-ware.de>) escribió:
>
> > Hi Cesar,
> >
> > I just had a look at your mspec changes. I think it shouldn't be
> > "getCpuSubfunction" but " cpuSubfunction" ... the code generator
> takes care
> > of generating the right access code. For my C templates this code is
> > sometimes greatly different from what you would expect in Java.
> >
> > Actually that should be about all that has to be changed.
> >
> > Chris
> >
> >
> > Am 13.06.20, 22:50 schrieb "Cesar Garcia" <cesar.gar...@ceos.com.ve
> >:
> >
> > Hi,
> >
> > I am trying to perform the migration to add the functionalities
> for
> > the S7
> > driver, associated with the subscription handling of alarm and
> system
> > events, but I am generating a failure in compiling the driver
> from the
> > mspec.
> >
> > In [1] I extend the step of the parameter 'cpuSubFunction' since
> I
> > require
> > it to indicate the subscription model. The change is in bold.
> >
> > In [2] I select the type based on the 'cpuSubFunction'.
> >
> > I try to generate the driver and the compiler sends me the
> message
> > indicated in [3]. It points to 'S7PayloadWriteVarRequest', but I
> > haven't
> > touched it.
> >
> > I appreciate your comments,
> >
> >
> >
> > [1]
> >
> > [discriminatedType 'S7Payload' [uint 8 'messageType', S7Parameter
> > 'parameter']
> > [typeSwitch 'parameter.discriminatorValues[0]', 'messageType'
> > ['0x04','0x03' S7PayloadReadVarResponse
> > [array S7VarPayloadDataItem 'items' count
> 'CAST(parameter,
> > S7ParameterReadVarResponse).numItems' ['lastItem']]
> > ]
> > ['0x05','0x01' S7PayloadWriteVarRequest
> > [array S7VarPayloadDataItem 'items' count
> > 'COUNT(CAST(parameter, S7ParameterWriteVarRequest).items)'
> > ['lastItem']]
> > ]
> > ['0x05','0x03' S7PayloadWriteVarResponse
> > [array S7VarPayloadStatusItem 'items' count
> > 'CAST(parameter,
> > S7ParameterWriteVarResponse).numItems']
> > ]
> > ['0x00','0x07' S7PayloadUserData
> > [array S7PayloadUserDataItem 'items' count
> > 'COUNT(CAST(parameter, S7ParameterUserData).items)'
> > ['CAST(CAST(parameter,
> > S7ParameterUserData).items[0],
> > S7ParameterUserDataItemCPUFunctions).cpuFunctionType',*
> > 'CAST(CAST(parameter, S7ParameterUserData).items[0],
> > S7ParameterUserDataItemCPUFunctions).getCpuSubfunction']*]
> > ]
> > ]
> > ]
> >
> > [2]
> >
> > [discriminatedType 'S7PayloadUserDataItem' [uint 4
> 'cpuFunctionType',
> > uint
> > 8 'cpuSubfunction']
> > [enum DataTransportErrorCode 'returnCode']
> > [enum DataTransportSize 'transportSize']
> > [implicit uint 16 'dataLength' 'lengthInBytes
> - 4']
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > * [typeSwitch 'cpuSubfunction' ['0x01' [simple
> > SzlId
> > 'szlId'] [simple uint 16
> > 'szlIndex'] [typeSwitch 'cpuFunctionType'
> > ['0x04' S7PayloadUserDataItemCpuFunctionReadSzlRequest
> ]
> > ['0x08'
> S7PayloadUserDataItemCpuFunctionReadSzlResponse
> > [const uint 16 'szlItemLength' '28']
> > [implicit uint 16 'szlItemCount' 'COUNT(items)']
> > [array
> > SzlDataTreeItem 'items' count 'szlItemCount'] ]
> > ] ] ['0x02' ] ]*
> > ]
> >
> > [3]
> > Failed to execute goal
> > org.apache.plc4x.plugins:plc4x-maven-plugin:1.2.0:generate-driver
> > (generate-driver) on project plc4j-driver-s7: Error generating
> sources:
> > Error generating output for type 'S7PayloadWriteVarRequest': Java
> > method
> >
> >
> "org.apache.plc4x.language.java.JavaLanguageTemplateHelper.getArgumentType(org.apache.plc4x.plugins.codegenerator.types.references.TypeReference,
> > int)" threw an exception when invoked on
> > org.apache.plc4x.language.java.JavaLanguageTemplateHelper object
> >
> "org.apache.plc4x.language.java.JavaLanguageTemplateHelper@8ac512e";
> > see
> > cause exception in the Java stack trace.
> >
> > ----
> > FTL stack trace ("~" means nesting-related):
> > - Failed at: ${helper.getArgumentType(field.type, ... [in
> template
> > "templates/java/io-template.ftlh" at line 136, column 248]
> > ----: Could not find definition of complex type
> S7VarPayloadDataItem
> > -> [Help 1]
> >
> >
> > --
> > *CEOS Automatización, C.A.*
> > *GALPON SERVICIO INDUSTRIALES Y NAVALES FA, C.A.,*
> > *PISO 1, OFICINA 2, AV. RAUL LEONI, SECTOR GUAMACHITO,*
> >
> > *FRENTE A LA ASOCIACION DE GANADEROS,BARCELONA,EDO. ANZOATEGUI*
> > *Ing. César García*
> >
> > *Cel: +58 414-760.98.95*
> >
> > *Hotline Técnica SIEMENS: 0800 1005080*
> >
> > *Email: support.aan.automat...@siemens.com
> > <support.aan.automat...@siemens.com>*
> >
> >
>
> --
> *CEOS Automatización, C.A.*
> *GALPON SERVICIO INDUSTRIALES Y NAVALES FA, C.A.,*
> *PISO 1, OFICINA 2, AV. RAUL LEONI, SECTOR GUAMACHITO,*
>
> *FRENTE A LA ASOCIACION DE GANADEROS,BARCELONA,EDO. ANZOATEGUI*
> *Ing. César García*
>
> *Cel: +58 414-760.98.95*
>
> *Hotline Técnica SIEMENS: 0800 1005080*
>
> *Email: support.aan.automat...@siemens.com
> <support.aan.automat...@siemens.com>*
>
>
--
*CEOS Automatización, C.A.*
*GALPON SERVICIO INDUSTRIALES Y NAVALES FA, C.A.,*
*PISO 1, OFICINA 2, AV. RAUL LEONI, SECTOR GUAMACHITO,*
*FRENTE A LA ASOCIACION DE GANADEROS,BARCELONA,EDO. ANZOATEGUI*
*Ing. César García*
*Cel: +58 414-760.98.95*
*Hotline Técnica SIEMENS: 0800 1005080*
*Email: support.aan.automat...@siemens.com
<support.aan.automat...@siemens.com>*
