Hi,
Thanks for the information. I started doing some investigation on the new
release mainly because I could not see what we were ( if possible) doing wrong
with the release. The broker would start executing and immediately one was
getting an assert as shown below in the output I generated with running it
under GDB. It asserts because it fails the test in file types.cpp in qpid/ha
line 38 ( assert(value < count). I noticed that this is happening as a result
of the call from the HaBroker::initialize() function line 90 in the
HaBroker.cpp file where a QPID_LOG is being invoked.
I believe the root of the problem is the BrokerInfo class constructor is not
initializing the private class data called "BrokerStatus status" which is
defined in file BrokerInfo.h . BrokerStatus is defined in types.h as an enum as
follows
enum BrokerStatus {
JOINING, ///< New broker, looking for primary
CATCHUP, ///< Backup: Connected to primary, catching up
on state.
READY, ///< Backup: Caught up, ready to take over.
RECOVERING, ///< Primary: waiting for backups to connect &
sync
ACTIVE, ///< Primary: actively serving clients.
STANDALONE ///< Not part of a cluster.
};
It seems like the assert happens on the second call to EnumBase::str() in
types.cpp. The count was 6 and the value was some large uninitialized value.
I initialized the status variable in the constructor to STANDALONE and the
broker came up and worked fine.
*****I assume we are going to need a patch or an update for the broker to be
used.
NOTE:: If I start the broker with the "--log-enable warning" or for that matter
others like notice, the broker comes up and works fine. But, if the broker is
started with no log-enable parameters, IT CRASHES. This seems pretty strange as
I thought you guys would have seen this.
I am running the broker on a CentOs 6.2 system. We have been using version 16
to date. The images are created a new and loaded on a VM, so the VM has no
remnants of the version 16, so it is clean version 18 load and use.
If I wish to continue using this release, can someone tell me what the correct
process for getting a patch is? Alternatively, what is the patch I should
apply, meaning can I add a initialize of the status parameter and what is the
CORRECT enum value to set it to?
Nitin
Ps let me know if there any other information you need
Thanks
(gdb) where
#0 0x00007ffff58b58a5 in raise () from /lib64/libc.so.6
#1 0x00007ffff58b7085 in abort () from /lib64/libc.so.6
#2 0x00007ffff58aea1e in __assert_fail_base () from /lib64/libc.so.6
#3 0x00007ffff58aeae0 in __assert_fail () from /lib64/libc.so.6
#4 0x00007ffff50464fb in qpid::ha::EnumBase::str (this=<value optimized out>)
at qpid/ha/types.cpp:38
#5 0x00007ffff5046533 in qpid::ha::operator<< (o=..., e=...) at
qpid/ha/types.cpp:64
#6 0x00007ffff5013a5a in qpid::ha::operator<< (o=<value optimized out>,
b=<value optimized out>)
at qpid/ha/BrokerInfo.cpp:99
#7 0x00007ffff5029fb4 in operator<< <qpid::ha::BrokerInfo> (this=0x6507b0) at
../include/qpid/Msg.h:63
#8 qpid::ha::HaBroker::initialize (this=0x6507b0) at qpid/ha/HaBroker.cpp:90
#9 0x00007ffff75d4861 in operator() (f=<value optimized out>)
at /usr/include/boost/bind/mem_fn_template.hpp:162
#10 operator()<boost::_mfi::mf1<void, qpid::Plugin, qpid::Plugin::Target&>,
boost::_bi::list1<qpid::Plugin* const&> > (f=<value optimized out>) at
/usr/include/boost/bind/bind.hpp:306
#11 operator()<qpid::Plugin*> (f=<value optimized out>) at
/usr/include/boost/bind/bind_template.hpp:47
#12 for_each<__gnu_cxx::__normal_iterator<qpid::Plugin* const*,
std::vector<qpid::Plugin*, std::allocator<qpid::Plugin*> > >,
boost::_bi::bind_t<void, boost::_mfi::mf1<void, qpid::Plugin,
qpid::Plugin::Target&>, boost::_bi::list2<boost::arg<1>,
boost::reference_wrapper<qpid::Plugin::Target> > > > (f=<value optimized out>)
at
/usr/lib/gcc/x86_64-redhat-linux/4.4.6/../../../../include/c++/4.4.6/bits/stl_algo.h:4200
#13 qpid::(anonymous namespace)::each_plugin<boost::_bi::bind_t<void,
boost::_mfi::mf1<void, qpid::Plugin, qpid::Plugin::Target&>,
boost::_bi::list2<boost::arg<1>, boost::reference_wrapper<qpid::Plugin::Target>
> > > (
f=<value optimized out>) at qpid/Plugin.cpp:73
#14 0x00007ffff75d48a2 in qpid::Plugin::initializeAll (t=<value optimized out>)
at qpid/Plugin.cpp:91
-----Original Message-----
From: Gordon Sim [mailto:g...@redhat.com]
Sent: Wednesday, September 05, 2012 12:29 PM
To: dev@qpid.apache.org
Subject: Re: FW: problems starting the version 18 broker
Can you run it with full tracing on? i.e. --log-enable trace+
What platform are you running on? Did make check pass when building? Did you
build and install from source on that machine; did you uninstall the
0.16 release first or are they both installed in different locations?
The second error appears to be coming from the HA module, possibly related to
the options. Could you be picking up the 0.16 modules when starting the 0.18
broker? (Trying with --module-dir pointing at a 0.18 modules only directory
would verify that).
On 09/05/2012 04:48 PM, Nitin Shah wrote:
> Ps if I run it in foreground then I get the following message
>
> 2012-09-05 11:39:45 [Broker] notice SASL disabled: No Authentication
> Performed
>
> 2012-09-05 11:39:45 [Network] notice Listening on TCP/TCP6 port 5672
>
> qpidd: qpid/ha/types.cpp:38: std::string qpid::ha::EnumBase::str()
> const: Assertion `value < count' failed.
>
> Aborted
>
> Thanks
>
> Nitin
>
> Description: bti_logo_small
>
> *From:*Nitin Shah
> *Sent:* Wednesday, September 05, 2012 10:37 AM
> *To:* dev@qpid.apache.org<mailto:dev@qpid.apache.org>
> *Cc:* Nitin Shah
> *Subject:* problems starting the version 18 broker
>
> Hi,
>
> I tried to start the version 18 of the C++ broker and get the
> following error in /var/log/messages and the broker dies. Any idea
> what we are doing wrong. We have been using the version 16 and that starts
> fine.
>
> 10:29:35 nshah_1 qpidd[1550]: 2012-09-05 10:29:35 [Broker] notice SASL
> disabled: No Authentication Performed
>
> Sep 5 10:29:35 nshah_1 qpidd[1550]: 2012-09-05 10:29:35 [Network]
> notice Listening on TCP/TCP6 port 5672
>
> Sep 5 10:29:35 nshah_1 qpidd[1549]: 2012-09-05 10:29:35 [Broker]
> critical Unexpected error: Cannot read from child process.
>
> Nitin
>
---------------------------------------------------------------------
To unsubscribe, e-mail:
dev-unsubscr...@qpid.apache.org<mailto:dev-unsubscr...@qpid.apache.org> For
additional commands, e-mail:
dev-h...@qpid.apache.org<mailto:dev-h...@qpid.apache.org>
