[
https://issues.apache.org/jira/browse/PROTON-1656?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel
]
Roddie Kieley updated PROTON-1656:
----------------------------------
Description:
This fails almost 100% of the time, usually with the following:
{code}
10: TEST: test_ipv4_ipv6(&t)
10:
/Users/rkieley/LocalProjects/issues/PROTON-522/qpid-proton-roddiekieley/proton-c/src/tests/proactor.c:637:
check failed: No condition, expected :refused [test_ipv4_ipv6(&t)]
10:
/Users/rkieley/LocalProjects/issues/PROTON-522/qpid-proton-roddiekieley/proton-c/src/tests/proactor.c:638:
check failed: No condition, expected :refused [test_ipv4_ipv6(&t)]
10: FAIL: test_ipv4_ipv6(&t) (2 errors)
{code}
or
{code}
10: TEST: test_ipv4_ipv6(&t)
10:
/Users/rkieley/LocalProjects/issues/PROTON-522/qpid-proton-roddiekieley/proton-c/src/tests/proactor.c:637:
check failed: 'refused' not in 'connection timed out - connecting to
127.0.0.1:49446' [test_ipv4_ipv6(&t)]
10: FAIL: test_ipv4_ipv6(&t) (1 errors)
{code}
It passed once during testing yesterday but not sure what that is indicative of
yet. Tested on Fedora 25 and always passes. Note that Fedora 25 is on a
separate box and I do note that the OSX box has two 'inactive' entries in
ifconfig which may or may not interfere with binding to 0.0.0.0 or ::1:
{code}
earth:126 rkieley$ ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
options=3<RXCSUM,TXCSUM>
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
nd6 options=1<PERFORMNUD>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=27<RXCSUM,TXCSUM,VLAN_MTU,TSO4>
ether d4:9a:20:0d:67:fc
inet6 fe80::d69a:20ff:fe0d:67fc%en0 prefixlen 64 scopeid 0x4
inet 192.168.2.4 netmask 0xffffff00 broadcast 192.168.2.255
nd6 options=1<PERFORMNUD>
media: autoselect (1000baseT <full-duplex,flow-control>)
status: active
en1: flags=8823<UP,BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 1500
ether f8:1e:df:f4:46:8c
nd6 options=1<PERFORMNUD>
media: autoselect (<unknown type>)
status: inactive
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 494
lladdr d4:9a:20:ff:fe:0d:67:fc
nd6 options=1<PERFORMNUD>
media: autoselect <full-duplex>
status: inactive
earth:126 rkieley$
{code}
was:
This fails almost 100% of the time, usually with the following:
{code}
10: TEST: test_ipv4_ipv6(&t)
10:
/Users/rkieley/LocalProjects/issues/PROTON-522/qpid-proton-roddiekieley/proton-c/src/tests/proactor.c:637:
check failed: No condition, expected :refused [test_ipv4_ipv6(&t)]
10:
/Users/rkieley/LocalProjects/issues/PROTON-522/qpid-proton-roddiekieley/proton-c/src/tests/proactor.c:638:
check failed: No condition, expected :refused [test_ipv4_ipv6(&t)]
10: FAIL: test_ipv4_ipv6(&t) (2 errors)
{code}
It passed once during testing yesterday but not sure what that is indicative of
yet. Tested on Fedora 25 and always passes. Note that Fedora 25 is on a
separate box and I do note that the OSX box has two 'inactive' entries in
ifconfig which may or may not interfere with binding to 0.0.0.0 or ::1:
{code}
earth:126 rkieley$ ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
options=3<RXCSUM,TXCSUM>
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
nd6 options=1<PERFORMNUD>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=27<RXCSUM,TXCSUM,VLAN_MTU,TSO4>
ether d4:9a:20:0d:67:fc
inet6 fe80::d69a:20ff:fe0d:67fc%en0 prefixlen 64 scopeid 0x4
inet 192.168.2.4 netmask 0xffffff00 broadcast 192.168.2.255
nd6 options=1<PERFORMNUD>
media: autoselect (1000baseT <full-duplex,flow-control>)
status: active
en1: flags=8823<UP,BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 1500
ether f8:1e:df:f4:46:8c
nd6 options=1<PERFORMNUD>
media: autoselect (<unknown type>)
status: inactive
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 494
lladdr d4:9a:20:ff:fe:0d:67:fc
nd6 options=1<PERFORMNUD>
media: autoselect <full-duplex>
status: inactive
earth:126 rkieley$
{code}
> [OSX] c-proactor-tests test_ipv4_ipv6 fails
> -------------------------------------------
>
> Key: PROTON-1656
> URL: https://issues.apache.org/jira/browse/PROTON-1656
> Project: Qpid Proton
> Issue Type: Sub-task
> Components: proton-c
> Environment: OSX 10.11.6, Xcode 7.3.1
> Reporter: Roddie Kieley
>
> This fails almost 100% of the time, usually with the following:
> {code}
> 10: TEST: test_ipv4_ipv6(&t)
> 10:
> /Users/rkieley/LocalProjects/issues/PROTON-522/qpid-proton-roddiekieley/proton-c/src/tests/proactor.c:637:
> check failed: No condition, expected :refused [test_ipv4_ipv6(&t)]
> 10:
> /Users/rkieley/LocalProjects/issues/PROTON-522/qpid-proton-roddiekieley/proton-c/src/tests/proactor.c:638:
> check failed: No condition, expected :refused [test_ipv4_ipv6(&t)]
> 10: FAIL: test_ipv4_ipv6(&t) (2 errors)
> {code}
> or
> {code}
> 10: TEST: test_ipv4_ipv6(&t)
> 10:
> /Users/rkieley/LocalProjects/issues/PROTON-522/qpid-proton-roddiekieley/proton-c/src/tests/proactor.c:637:
> check failed: 'refused' not in 'connection timed out - connecting to
> 127.0.0.1:49446' [test_ipv4_ipv6(&t)]
> 10: FAIL: test_ipv4_ipv6(&t) (1 errors)
> {code}
> It passed once during testing yesterday but not sure what that is indicative
> of yet. Tested on Fedora 25 and always passes. Note that Fedora 25 is on a
> separate box and I do note that the OSX box has two 'inactive' entries in
> ifconfig which may or may not interfere with binding to 0.0.0.0 or ::1:
> {code}
> earth:126 rkieley$ ifconfig
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
> options=3<RXCSUM,TXCSUM>
> inet6 ::1 prefixlen 128
> inet 127.0.0.1 netmask 0xff000000
> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
> nd6 options=1<PERFORMNUD>
> gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
> stf0: flags=0<> mtu 1280
> en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> options=27<RXCSUM,TXCSUM,VLAN_MTU,TSO4>
> ether d4:9a:20:0d:67:fc
> inet6 fe80::d69a:20ff:fe0d:67fc%en0 prefixlen 64 scopeid 0x4
> inet 192.168.2.4 netmask 0xffffff00 broadcast 192.168.2.255
> nd6 options=1<PERFORMNUD>
> media: autoselect (1000baseT <full-duplex,flow-control>)
> status: active
> en1: flags=8823<UP,BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 1500
> ether f8:1e:df:f4:46:8c
> nd6 options=1<PERFORMNUD>
> media: autoselect (<unknown type>)
> status: inactive
> fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 494
> lladdr d4:9a:20:ff:fe:0d:67:fc
> nd6 options=1<PERFORMNUD>
> media: autoselect <full-duplex>
> status: inactive
> earth:126 rkieley$
> {code}
--
This message was sent by Atlassian JIRA
(v6.4.14#64029)
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
