I don't know, but I don't like that statement
"c.getWeblogCategories().add(c); " A WeblogCategory should no longer
have child weblog categories (they are pure siblings of each other with
no hierarchical relationship), so such an "add" shouldn't exist. You
can have -->Weblog<---.getWeblogCategories().add(c), that would make sense.
Glen
On 01/05/2014 03:32 PM, Gaurav wrote:
Hello Glen,
I tried finding the that issues, but did not find anywhere. Also it is
created dynamically as I changed the entity name to category1 then
also sameerror come up with "category1_category1" doesn't exist. I
think this might be something I am doing wrong with the code. As,
Today I cleaned up all the code and now everything is working good. I
am successful in creating, editing and deleting the weblog, entries,
categories and everything is showing good.
Just single problem I am having now is showing the categories list in
feeds and in menu. I figured out after checking that
$categoryObject.getWeblogCategories() is iterated in velocity file
which check for the getWeblogCategories() method of type Set in
WeblogCategory class, Initially I commented this method as the
comments over this method said "Get child categories of this
category". But I think this is neccasary as whenever a category is
created this is called to add a category to Set
"rootCat.getWeblogCategories().add(c);"
Now, Problem is we did not have any parent or root category now, so
how it will going to add to that Set and Also I tried creating a
object of WeblogCategory Class and tried adding it to
getWeblogCategories() method then again. Now When I tired adding
category with this "c.getWeblogCategories().add(c);" the same error
comes up. If I comment this line that add category, everything works
fine again, just did not get any list of categories in menu and feed.
Also, I am confused what setWeblogCategories() is doing as I did not
find anywhere where it is used for setting categories. Just the
getWeblogCategories() is used with .add for adding child categories to
parent/root.
Below is what I done in addWeblogContents method of class
JPAWeblogManagerImpl.
if (cats != null && cats.trim().length() > 0) {
String[] splitcats = cats.split(",");
for (int i=0; i<splitcats.length; i++) {
WeblogCategory c = new WeblogCategory(
newWeblog, // newWeblog
splitcats[i], // name
splitcats[i], // description
null ); // image
if (i == 0) {
firstCat = c;
}
System.out.println("====Cats==="+c);
c.getWeblogCategories().add(c); //previously it was
root.getWeblogCategories.add(c);
this.strategy.store(c);
}
}
[EL Warning]: 2014-01-05
17:15:22.179--ClientSession(1956103136)--Exception [EclipseLink-4002]
(Eclipse Persistence Services - 2.5.0.v20130507-3faac2b):
org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLSyntaxErrorException: Table/View
'CATEGORY_CATEGORY' does not exist.
Error Code: 20000
Call: INSERT INTO category_category (weblogCategories_id,
WeblogCategory_id) VALUES (?, ?)
bind => [2 parameters bound]
Query: DataModifyQuery(name="weblogCategories" sql="INSERT INTO
category_category (weblogCategories_id, WeblogCategory_id) VALUES (?,
?)")
*
*Also I tried making new ArrayList and new getter setter in
WeblogCategory class, still I got same error.
List<WeblogCategory> catsss = new ArrayList<WeblogCategory>();
catsss.add(c);
c.setList(catsss);
System.out.println("======"+catsss+"============"+c.getList());
Got this error, after adding Arraylist.
[EL Warning]: 2014-01-05
19:42:56.209--ClientSession(1732472947)--Exception [EclipseLink-4002]
(Eclipse Persistence Services - 2.5.0.v20130507-3faac2b):
org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLSyntaxErrorException: Table/View
'CATEGORY_CATEGORY' does not exist.
Error Code: 20000
Call: INSERT INTO category_category (list_id, WeblogCategory_id)
VALUES (?, ?)
bind => [2 parameters bound]
Query: DataModifyQuery(name="list" sql="INSERT INTO category_category
(list_id, WeblogCategory_id) VALUES (?, ?)")
Thanks
Gaurav
On Sunday 05 January 2014 05:30 AM, Glen Mazza wrote:
Hi Gaurav, did you try a "control" with your file search method?
I.e., you're saying you're case-insensitive searching on
"category_category" but nothing is getting returned -- did you try
also searching something that you *know* exists in the project (say,
"class", "public", "return", etc.) and your IDE/search method indeed
did return lots of matches? Because if you get zero search results
with the latter we know the problem is with the way you're
configuring your search, not the non-existence of
"category_category". (Also are you searching on every type of file
extension, not just .java files?)
Somewhere in your code the JPA layer has decided to calculate
"category_category" as a table name, I would guess because that's
what is exactly in the code someplace (as you can see the query below
generated "...FROM category_category t0, category t1..."). One useful
experiment might be to rename the "category" table (t1) above to
"category2" -- would the SQL above change to "category2_category2,
category2..." or (I think) "...FROM category_category t0, category2
t1...") If the former, that would indicate that
"category2_category2" is being dynamically generated from the
"category2" table name. If the latter, that would mean
"category_category" is hardcoded somewhere and not related to the
"category" table name you've properly configured.
I probably won't be able to get to this until next weekend anyway, so
I'm going to have you finish it, also as a confidence-builder for you
(if you let JPA push you around now, it's always going to bully
you... :)
Regards,
Glen
PS: Just to clarify, when an pre-5.1-SNAPSHOT user installs Roller
5.1-SNAPSHOT, the Roller startup should automatically detect that the
system is currently using an older Roller database and do the
database upgrade (creating of new the "category" table and
prepopulation of it). Roller has always done this as so long as you
put the necessary migration scripts in the right place there should
be no problem. However, those of us already on 5.1-SNAPSHOT like
myself before your patch will need to manually create that table in
our database (the Roller script won't notice
5.1-SNAPSHOT-->5.1-SNAPSHOT, so won't create "category" by itself.)
No problem, we'll just figure out the necessary SQL statements for
Dave and he can add it to his Roller project blog.
On 01/04/2014 04:47 PM, Gaurav wrote:
Hello Glen,
I searched whole project and did not find anywhere. I think might be
I have done something wrong, as when I start with new database,
everything work just deleting gives me this error. If I work on old
database it even did not start up (localhost:8080/roller) gives my
below error.
I have checked almost everything I can, might be some wrong java
code and anything I done wrong that causes this. Should I submit by
work so you can look on to it, or if we are not in any hurry than I
can look into it again step by step (I prefer second option if we
have one more week. Just another week or so, next week i have some
tight schedule). I know I am taking too much time, but I am new to
this level of Java code, as I worked maximum time at client side.
But I really loving java code and learned a lot till now, before
this I just worked with Java on small projects. OpenSource Projects
really are very powerful and good way to learn new things.
Exception [EclipseLink-4002] (Eclipse Persistence Services -
2.5.0.v20130507-3faac2b):
org.eclipse.persistence.exceptions.DatabaseException Internal
Exception: com.mysql.jdbc.exceptions.MySQLSyntaxErrorException:
Table 'roller.category_category' doesn't exist Error Code: 1146
Call: SELECT t1.id, t1.description, t1.image, t1.name, t1.websiteid
FROM category_category t0, category t1 WHERE ((t0.WeblogCategory_id
= ?) AND (t1.id = t0.weblogCategories_id)) bind => [1 parameter
bound] Query: ReadAllQuery(name="weblogCategories"
referenceClass=WeblogCategory sql="SELECT t1.id, t1.description,
t1.image, t1.name, t1.websiteid FROM category_category t0, category
t1 WHERE ((t0.WeblogCategory_id = ?) AND (t1.id =
t0.weblogCategories_id))")
Thanks
Gaurav
On Sunday 05 January 2014 12:00 AM, Glen Mazza wrote:
Hi Gaurav, no, that relation shouldn't be needed anymore.
As for the table name, at the top of your orm.xml file the table
name the file maps against is declared -- perhaps you accidentally
called it category_category. I would grep or use a file search
from your IDE of your entire roller source code, looking for where
category_category is being declared -- (probably) has to be there
someplace. (More specifically, do a file search on
"DataModifyQuery" -- that's probably exactly where the problem is.)
Once working, try to import the latest code changes into your code
before submitting a patch (actually create a backup patch first
just in case). Not sure but I think a simple svn update will do --
svn will identify some files where it will need your assistance to
resolve any differences -- it shouldn't be too hard or
time-consuming to do.
Regards,
Glen
On 01/04/2014 08:55 AM, Gaurav wrote:
Hello Glen,
I just want to know that the below relations in
WeblogCategory.orm.xml are required or not as now the parent is
not used so, I don't think its needed now. I have commented the
below lines.
<many-to-one name="parent"
target-entity="org.apache.roller.weblogger.pojos.Category">
<join-column name="parentid" insertable="true"
updatable="true" nullable="true"/>
</many-to-one>
<one-to-many name="weblogCategories"
mapped-by="parent"
target-entity="org.apache.roller.weblogger.pojos.Category"
fetch="LAZY">
<cascade>
<cascade-remove/>
</cascade>
</one-to-many>
<transient name="inUse"/>
I asked this because, getting categories giving me mysql
exception. The new table is 'roller.category' but it executes for
'roller.category_category'.
I am not able to get what I have done wrong.
Internal Exception:
com.mysql.jdbc.exceptions.MySQLSyntaxErrorException: Table
'roller.category_category' doesn't exist
Error Code: 1146
Call: DELETE FROM category_category WHERE (WeblogCategory_id = ?)
bind => [1 parameter bound]
Query: DataModifyQuery(name="weblogCategories" sql="DELETE FROM
category_category WHERE (WeblogCategory_id = ?)")
Also, I have changed the getWeblogCategoryByPath to
getWeblogCategoryByName so feeds and other places work fine. I
have able to get catgeory list, new entries are creating
successfully. Just deleting the weblog is giving me above error.
Thanks
Gaurav
On Saturday 04 January 2014 12:53 PM, Gaurav wrote:
Hello Glen,
I have already deleted getPath and getParent and in the mid of
everything. I hope I will be able to complete this by Monday. If
still, I get some major issues due to this, I will switch to what
you suggested. Just give me time till Monday, as I have done
almost 80% of code cleaned regarding the path and parentcategory.
I will get back to you soon with some patches and then you can
test it.
Also, my ICLA have been filed, got the receipt of my ICLA.
Thanks
Gaurav
On Wednesday 01 January 2014 08:07 AM, Glen Mazza wrote:
Gaurav, sorry, it just occurred to me there's a simpler
intermediate step that can be done. While we need the database
table without a path column, and to remove the "path" member
*variable* from WeblogCategory (or its replacement), we can
still keep indefinitely keep getPath(), just hardcode it to "/"
+ categoryName, which is precisely what the old code returns for
any top-level category--the rest of the system can stay just as
it did before. Switching the rest of the code from getPath() to
using getName() can be done at any time, bit by bit whenever,
that's not necessary to implement positioning, that's just a
code cleanup issue. Likewise, for WeblogCategory.getParent(), it
may be as simple as adding a root category object as part of the
Weblog's constructor (but not saved to the database), and having
WeblogCategory.getParent() just return
website.getParentCategory()--that way all categories for a
weblog will have the same root category as before, and the rest
of the code base should function fine. Once we're on the new
table, then it's an issue of implementing positioning--getting
rid of getParent() and getPath() can be done by anybody at a
later date.
Regards,
Glen
On 12/31/2013 08:09 AM, Glen Mazza wrote:
No problem, I'm available to help (or finish it up) if needed.
For a seemingly simple switch, you're certainly getting a
*full* education of the Roller codebase. :)
BTW, I hope you're not testing via mvn jetty:run, as that
requires you to keep logging in for the first time, creating a
blog for the first time, etc., whenever you start it. Very
inefficient and tiring. Normally I just build (mvn clean
install) and dump the WAR into standalone Tomcat on my local
machine. The database & other configuration I keep permanently
in roller-custom.properties in the Tomcat lib/ folder, so the
new WAR just takes over with the same configuration, blogs,
accounts, etc., that old WAR was using. (Check the Roller
install guide for full instructions.)
Also vital is that you know how to debug/trace Roller code in
Eclipse or IntelliJ while it is running on Tomcat (or another
servlet container). It's much simpler than it seems, and will
save you a lot of time. These instructions are for Eclipse but
Intellij (my preference) is basically the same:
http://www.jroller.com/gmazza/entry/eclipse_debug_web_services#ec3.
Checking variable values while it's running will point you to
where problems are much more quickly.
Happy New Year!
Regards,
Glen
On 12/31/2013 06:39 AM, Gaurav wrote:
Hello Glen,
As, I previously told you that the test cases are giving
problem, actually I think we have to do some changes in Test
Cases also, as many of the methods involving path and parent
are removed so, many times in test cases (it did not get
correct values and give errors).
I have successfully showed the categories by website till now
in the admin section. Also, the entries are saved just, I ran
out of memory issue in happen when I save an entry that entry,
although it get saved when I refresh the page.
Also, as their is not path now, we have to do some changes in
velocity files, as feeds are giving error in showing, although
if I direct enter the URL its working fine. I have cleared
many parts of the code, just I have test of the roller parts
which are linked the path and parent. I am thinking of
correcting the test cases, as I can run them and if test cases
are fine then might be everything will work fine.
I will return to work on this after 3 days, as I will be and
will get be to it during coming weekend again. I will wrap
this out asap for you to test and will attach patches coming
weekend.
Thanks
Gaurav
On Saturday 28 December 2013 05:49 PM, Gaurav wrote:
Thanks for that info, I have changed my settings in the eclipse.
Yes, you are right I will leave the ordering part for now and
work on clearing the code for now. For now I will just add a
column in category table with position, leaving it null for now.
Regards,
Gaurav
On Saturday 28 December 2013 05:33 PM, Glen Mazza wrote:
Your last ImprovedCreateUser.patch had some tab characters
in it, and our project uses spaces for tabs (just have
Eclipse insert 4 spaces whenever you hit the tab key, with
no tab characters.) Very few Apache projects (any?) are
tab-indented today. It is a simple fix with IntelliJ IDEA
(Edit -> Convert Indents -> To Spaces), I'm sure Eclipse has
an equivalent.
For blogs migrating from pre-5.1 versions, we can keep the
position NULL by default (and when you order by position,
with null values, they will come out in any order, like they
do today.) Whenever a new blog is created with the default
three categories, those can be assigned positions (probably
0-based for leftmost is best.) For migrated blogs, once the
user goes to the category page and makes a change for the
first time, numbers can be written for the very first
time--no special extra UI is needed for this purpose. But
like I was saying, this is such a lengthy patch you may wish
to forget about the ordering right now--it doesn't work
anyway in Roller right now. It may be best to get us to the
new table and get rid of the paths, and once we're on that
firmer foundation implementing positioning (on the Category
page and in the templates) will be much simpler.
Regards,
Glen
On 12/28/2013 06:14 AM, Gaurav wrote:
Hello Glen,
I will change the position to be integer, and will exclude
the category where parent null, but still what can be done
for the position as the old data did not have position, so
how and on what basis we have to add position to it. I was
thinking that we can left it as null, and provide some UI
in backend where user can assign position themselves.
I will take care of spacing, will search what I am doing
wrong. As, I am not sure is that you are talking about
formatting the code, or anything else. As I use tab (with 4
spaces) in Eclipse IDE.
Thanks
Gaurav
On Saturday 28 December 2013 04:27 PM, Glen Mazza wrote:
BTW, not to be hated, but make sure any code you submit is
space-padded (4 spaces), *not* tab-padded. Your IDE should
be able to convert it for you if you've been doing
tab-padding.
Regards,
Glen
On 12/28/2013 05:06 AM, Gaurav wrote:
Hello Glen,
I am confused on how to add and on what basis we have to
addd position to the new category table. Below two sql
commands can be used for coping data and deleting the
root categories.
create table category (
id varchar(48) not null primary key,
name varchar(255) not null,
description varchar(255),
websiteid varchar(48) not null,
image varchar(255),
position varchar(48)
);
insert into category(id,name,description,websiteid,image)
select id,name,description,websiteid,image from
weblogcategory;
delete from category where name="root";
What do you suggest for this ?
Thanks
Gaurav
On Saturday 28 December 2013 06:56 AM, Glen Mazza wrote:
Take your time, this is a messy change as it affects
many areas of the code. But Roller will be
architecturally much more solid and simpler once this
change is done. I have your ROL-1616 and ROL-1982 on my
plate for this weekend.
Glen
On 12/27/2013 02:40 PM, Gaurav wrote:
Hello Glen,
I have deleted the path and all related methods, but
its seems to me that the path methods like
(getWeblogCategoryByPath) and many other path and
parent related methods, are scattered over the whole
roller. There are many occurrence of these methods and
I have to sort out each piece of code as now there is
no path so, mostly we check for categoryPath != null in
if conditions, so these are no longer needed.
Also, I as thinking after testing and completing this
we can delete the WeblogCategory and replace with
Category method, as it will be clean. I also figured
out why my tests are failing as during creating of
weblogentry it did not find the categories, as that
class was using old WeblogCategory table and using that
class methods. I think I will definitely will figure
out everything at the end and will successfully test
with the unit tests.
I am now in the editor part so can display the
categories on front end, I am now all over the 1-2-3-4
steps you mentioned. As soon as I will able to display
the categories (small issues left) at the backend, I
will again go through my changes. Also, at this time I
can only create patch for new table and migration
script, as all other classes code are interrelated so
can't submit now. I will test every single thing
related to categories, then I will submit my patches.
Although I have learned a lot new things, just spent
last two full days on this sorting out things, many
times ending up nowhere from where I started. But I am
confident that I will definitely complete this task.
Just I am worrying that I must be taking too much time.
If there is something, you can advice me I would happy
to follow that also.
Thanks
Gaurav
On Friday 27 December 2013 05:09 AM, Glen Mazza wrote:
If it helps, you can provide interim patches, so long
as it doesn't break the current code base. You may
want to create a patch just creating the new database
table (which will be ignored by the current code) and
sql insert-select scripts to move from the current
table to the new one, then one converting the code to
using the new table without sorting, then (finally)
one that implements sorting of the categories.
Glen
On 12/26/2013 08:12 AM, Gaurav wrote:
Hello Glen,
I have created and updated all necessary files in JPA
and for database, I tried compiling the code it gave
me errors in test cases. As I am not sure that what I
am wrong in this. Although I tried compiling without
running test cases, it worked fine. I tested it with
tomcat and new table category is created and initial
category (General, Finance and Technology) are
created with the position 1,2,3. Still there are many
thing I have to clean up and sort out and will test
it again.
Thanks
Gaurav
On Thursday 26 December 2013 03:31 PM, Gaurav wrote:
Ok, got your point. I will check on other Roller
parts also if parent name and path aren't be using
in any other part of Roller. I will go into the RSS
and Atom feeds later on, and see what changes it
need. As, till now I have changed many files and
created some, so will first test this part then go
into that feeds part.
Thanks
Gaurav
On Thursday 26 December 2013 03:23 PM, Glen Mazza
wrote:
Sounds good, but may require more work to make sure
all is good with the RSS and Atom feeds as a result
(which I believe rely on path). Where path is used
to check for equivalence, I guess name (and
blog/website ID, if necessary) alone will do now.
We may need to check (if we aren't already) that no
two categories have the same name, where prior we
were checking that no two paths are the same (i.e.,
allowing category paths USStates/Georgia and
Countries/Georgia but now needing to disallow two
categories named "Georgia".)
Regards,
Glen
On 12/26/2013 12:47 AM, Gaurav wrote:
Hello Glen,
I am thinking of removing the path coloumn also,
as it does not make sense now as there will no
subcategories and all will have same path (like
/categoryname). WDYT ?
Thanks
Gaurav
On Wednesday 25 December 2013 04:05 PM, Glen Mazza
wrote:
Yes, the root category can be nuked.
Glen
On 12/25/2013 05:28 AM, Gaurav wrote:
Hello Glen,
I want to know as now all the categories will be
top level, so the root category which is created
by default on addWeblog isn't needed. So, I can
remove that code also ? I am in half completed
with the 1-2 steps will soon submit some patched
in jira issue. You can look on to them whenever
you will get time from other projects.
Merry Christmas :)
Thanks
Gaurav
On Tuesday 24 December 2013 10:57 AM, Gaurav wrote:
Glen,
Thanks a lot for replying soon on this, I
understand your commitments. As this will give
me more time on working on this issue. I will
give my 100% on this, as I also want to get
into more and more open source projects. For
Now I am focusing on Roller for starting my
contributions in open source.
Thanks
Gaurav
On Tuesday 24 December 2013 10:51 AM, Glen
Mazza wrote:
No, not a rush (unfortunately I can't help
much right now either, as my other project
JSPWiki has a new release going out.) But
please be patient with us on your recent
submitted patches -- we haven't forgotten you
and are happy with your efforts on this
project so far, we just have full-time jobs
and, even after that, other obligations -- for
open source work, we usually have to beg,
borrow and steal time to work on them.
Glen
On 12/24/2013 12:05 AM, Gaurav wrote:
Hello Glen,
I am going through this having some issues,
although not major till now. I have still
working on 1-2 steps, might be I am slow as
get less time. (Wish we also have holidays of
this festive season in India :P) Just want to
know isn't there any hurry for completing
this asap ? Although, I am sure will
definitely complete this as I have understood
the structure of Roller completely. Just I
have to go through the JPA more and read
about this.
Thanks
Gaurav
On Saturday 21 December 2013 04:59 PM, Glen
Mazza wrote:
Looking good. Anything you're missing will
become apparent to you as you work along.
The Roller installation guide and here
(http://www.jroller.com/gmazza/entry/apache_derby_setup)
can show you how to test also with Derby if
you'd like. (It is usually simpler than
MySQL, and another benefit of working on
Roller is that you become
multiple-database-lingual very quickly.)
Glen
On 12/21/2013 06:16 AM, Gaurav wrote:
Hello Glen,
Thanks for helping in this and I with this
much deep information, I can start working
in it. I have started working on this Issue
and have followed your steps.
1. Created a new table in createdb.vm and
in migration scripts also. I have for mow
stared working on MySQL.
2. In JPAWeblogEntryManagerImpl class, I
have commented updatePathTree and
getRootWeblogCategory methods
3. I have created a new file for now
Category.orm.xml and enterd details of new
table. A new class Category in
weblogger/pojos.
I have created new files for now and will
work on this and add new position coloum
and code regarding this. Other than UI and
template Layer, I think I have covered all
files on which I have to work on the
Database and JPA layers ? Please tell me if
I am wrong anywhere or following wrong
workflow.
Thanks
Gaurav
On Saturday 21 December 2013 04:59 AM, Glen
Mazza wrote:
Hi Gaurav, we use Velocity for our
database scripts -- you see a createdb.vm
plus migration scripts (5.0 to 5.1) --
we'll want our change in both places
(IIRC), new users have the createdb run
and Roller upgraders with their current
DB's have the 5.0 to 5.1 migration script
run.
We have multiple issues here and I'd like
to get this done right (I plan on helping
out where you'd like). Namely, we've moved
from a hierarchical category structure
(categories having subcategories having
their own subcatorgories etc.) to a flat
single-level structure (all categories are
top level) -- that was done a week or so
back. Problem is, the database tables are
still assuming hierarchical (they will
work with flat structures but are
overkill--we don't need a parent ID column
anymore.) Also, the JPA objects are
designed for hierarchical but can
simplified a bit more to flat structure.
Incidentally, "sequenceNum" is ambiguous
about what it means, I would say
"position" or "ordering" (INT null, null
for migrators who don't yet have a
position defined) is clearer.
I think the simplest way to handle
this--for both new installers and
upgraders--is:
1.) Database: To create a new table, say
"category" designed precisely as we need,
and have the migration scripts select from
the old weblogcategory and insert into the
new category table. (We then ignore the
weblogcategory table.) We'll need to test
the scripts with at least two databases (2
of probably MySQL, Derby and/or
PostgreSQL) and guess for the others--if
we're wrong the user community can supply
a patch fixing it.
2.) JPA: The JPA persistence object (the
old WeblogCategory) will need
simplifying/restructuring as it's now
flat-level. Indeed, I think things will
get a *lot* simpler here, as it may just
be the parent Weblog holding a list of
some sort of Category objects--that's it.
3.) UI Layer: The category.jsp (or
whatever it's called) and its Struts
action class will now need to use the new
Category object (and table) instead of
WeblogCategory. The UI page will need two
changes: (1) all new categories will be
placed (and saved) at the bottom of the
category list (and as result, appear last
(right-most) in the category list, and,
later (2) probably have up and down
buttons in the table allowing users to
easily reorder the categories as they
like. (Strictly speaking, 1 alone is all
that's needed for ordering, as you can
remove/name/delete/recreate categories to
eventually get them in the position you'd
like, but (2) of course is much nicer.)
4.) Template layer (haven't looked into
this): The templates (probably just a
macro or two) will need updating to ensure
that they output the category names per
the new position order.
It's a lot of work, but one advantage is
that I'd like to do the same thing with
bookmarks/blogrolls (team discussion
pending...), switch from a hierarchical to
flat-level for those too. If we can do
this for categories, the logic/UI design,
etc., will carry over 100% to bookmarks.
I was planning on eventually getting to
this myself, so am available to work with
you on whatever parts you'd like. I think
going in order 1-2-3-4 and having separate
commits may be the cleanest way of doing
this. What's nice about using a brand new
table and JPA object is that the old
objects can still work in the code while
we're creating the new, we just don't
activate the new until the very end.
WDYT? (Also, other team members on the
above ideas...?) Or are there other Roller
tasks you'd like to sink your teeth into
instead? I can look at this otherwise, but
this looks like a very good exercise for
someone wanting to get more involved in
Roller, as it covers all the layers of the
webapp.
Regards,
Glen
On 12/20/2013 10:43 AM, Gaurav wrote:
Hello,
I have started working on ROL-1981, as
discussed in previous discussion threads
I will add new column sequenceNum in
weblogcategory table. Then we can assign
sequenceNum to each category according to
websideid. If anyone have some ideas
regarding this, please help me. Also,
need some help on how to go with this
issue, and how to add new coloum, I found
.sql file, do I need to add there new
column. Also, Is this possible that that
when I restart the roller it will add new
column to database ?
Thanks for Any ideas/help.
[1] -
https://issues.apache.org/jira/browse/ROL-1981
