Hi Alina,

I recommend just running the compiled application and fixing problems as you 
run into them.

If you start copying code and deleting other code, you cannot guarantee that 
the results will run.  I'm not even sure TitleWindow is a valid child control 
of an Application.  Usually it is a popup dialog.

When you run the application, you will probably find exceptions in the console. 
 Set a breakpoint, see if you can figure out why it is generating an exception. 
Change the code as needed.

If you aren’t getting exceptions, then look at the element tree.  Either all of 
the expected elements have been created or not.  If not, then look at the 
innermost element to see what it is.  In the properties for the element is a 
royale_wrapper property that points to the transpiled AS3 class.  That can help 
you know what class didn't create its children.  Check the _beads array of that 
class to see if it created its beads or not.  If not, check the CSS for that 
element, or debug into its code.  Usually, addedToParent is where the view bead 
is added.

If the elements have been created, check the sizes.  Often some of them will 
have width or height = 0.  Try to figure why it is getting a bad size.

If you take this approach, then if you get stuck you can ask a much more 
specific question and we can give you more specific answers.

Unfortunately, our days only overlap by a few hours, but I hope other 
committers can help as well.  It is in their best interest to improve their 
help and debugging skills.

-Alex

On 10/15/18, 12:59 AM, "Alina Kazi" <alina.k...@d-bz.com> wrote:

    Hi Alex,
    As our whole application is compiled successfully without error as a part 
of SparkRoyale Library.
    
    Now, We have created a project like tourdeflexmodules to compile and 
visually see the application output.
    Initially started with the basic(small) file of our application that is 
used by most of the files of our Application.
    
    We have a file in our application "Picklist.mxml"
    It was actually like :
    
[1]https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpaste.apache.org%2FRVtj&amp;data=02%7C01%7Caharui%40adobe.com%7C605293f617b44b2cbaee08d6327416cf%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636751871543887622&amp;sdata=rSp5BeYZ%2FOQQ3AEb2OlQhfQJ5pputqIBJh8P9S%2BgGWY%3D&amp;reserved=0
    
    we want to see it visually as all our mx and spark controls are already 
added in Apache Royale.
    Deleted whole code accept visual controls from src file :
    
[2]https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpaste.apache.org%2FH4Sm&amp;data=02%7C01%7Caharui%40adobe.com%7C605293f617b44b2cbaee08d6327416cf%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636751871543887622&amp;sdata=CV5E3e9LQy9SBnTfSZzq9IvVUwB4gTjwC4GL18MNTjM%3D&amp;reserved=0
    
    Nothing shows inside spark BorderContainer & TitleWindow. 
    
[3]https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpaste.apache.org%2FEpS8&amp;data=02%7C01%7Caharui%40adobe.com%7C605293f617b44b2cbaee08d6327416cf%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636751871543887622&amp;sdata=hpafAVNjBU005ClAYWxzl2oahn%2BMT3iJpY45ghNndpA%3D&amp;reserved=0
    How can we see all visual controls as they were in Flex of this particular 
file.
    Even spark BorderContainer default.css is copied from Flex ->Royale.
    
    Thanks,
    Alina Kazi
    
    -----Original Message-----
    From: Alex Harui [mailto:aha...@adobe.com.INVALID] 
    Sent: Monday, October 15, 2018 11:15 AM
    To: dev@royale.apache.org
    Subject: Re: Getting An Emulation Component To Run
    
    Hi Alina,
    
    Different APIs will have different solutions.  Pick an API you want to have 
work and let's discuss how to make it work.
    
    -Alex
    
    On 10/14/18, 10:48 PM, "Alina Kazi" <alina.k...@d-bz.com> wrote:
    
        Hi Alex,
         
        All mx and spark class methods those were left empty for the 
compilation of Application.  
        Also Module does not show anything on screen.
        
        Thanks in Advance,
        Alina
        
        -----Original Message-----
        From: Alex Harui [mailto:aha...@adobe.com.INVALID] 
        Sent: Thursday, October 11, 2018 12:32 PM
        To: dev@royale.apache.org
        Subject: Re: Getting An Emulation Component To Run
        
        Hi Alina,
        
        Which components or properties are you trying to get to run?
        
        -Alex
        
        On 10/10/18, 10:40 PM, "Alina Kazi" <alina.k...@d-bz.com> wrote:
        
            Hi Alex,
            
             
            
            What if CSS for a component is not written in Basic / Express 
defaults.css?
            
            And We need it in MXRoyale / SparkRoyale
            
            Thanks,
            
            Alina Kazi
            
             
            
            From: Alex Harui [mailto:aha...@adobe.com] 
            Sent: Monday, October 08, 2018 8:40 PM
            To: Alina Kazi
            Subject: Re: Getting An Emulation Component To Run
            
             
            
            Hi Alina,
            
             
            
            Please ask these questions on dev@ as well.   
            
             
            
            CSS with ClassReference is a way to use Composition to customize 
components.   Copying code is usually a bad practice as it creates maintenance 
issues.  So, in general, the preference should be to use CSS.
            
             
            
            HTH,
            
            -Alex
            
             
            
            From: Alina Kazi <alina.k...@d-bz.com>
            Date: Monday, October 8, 2018 at 2:02 AM
            To: Alex Harui <aha...@adobe.com>
            Subject: Getting An Emulation Component To Run
            
             
            
            Hi Alex,
            
            We want to know how can we identify which is the right stub? 
            
            For Example: selected property written differently in CheckBox, 
RadioButton and 
            
            we want selected property for Button. How can we identify and pick 
the right code for Button?
            
             
            
            1.       copying the little bits of code from the Basic or Express 
version into the right stub in the Emulation Component
            
            2.       copying the CSS from Basic or Express defaults.css into 
the MXRoyale or SparkRoyale defaults.css
            
             
            
             
            
            Thanks in Advance,
            
            Alina Kazi
            
            
        
        
        
    
    
    

Reply via email to