I installed via homebrew, too. Maybe I need to check with the homebrew settings.
-----Original Message----- From: wangwei...@gmail.com [mailto:wangwei...@gmail.com] On Behalf Of Wang Wei Sent: Sunday, 17 July, 2016 10:39 PM To: dev@singa.incubator.apache.org Subject: Re: Problems on mac OK. I see. It works by installing from source. It would be better to figure out the problem of homebrew as it is preferred by MacOS users. http://caffe.berkeleyvision.org/install_osx.html On Sun, Jul 17, 2016 at 10:02 PM, Xiezhongle <xiezhon...@comp.nus.edu.sg> wrote: > He installed Protobuf_v2.6.1. > I installed Profobuf on our mac with default settings and it worked. > The version is also 2.6.1. > > -----Original Message----- > From: wangwei...@gmail.com [mailto:wangwei...@gmail.com] On Behalf Of > Wang Wei > Sent: Sunday, 17 July, 2016 9:59 PM > To: dev@singa.incubator.apache.org > Subject: Re: Problems on mac > > brew install --build-from-source --with-python --fresh -vd protobuf > > May have a try. > > Or would it the problem of protobuf 3.0? hombrew would install > protobuf > 3.0 by default http://brewformulas.org/protobuf > > On Sun, Jul 17, 2016 at 9:43 PM, Xiezhongle > <xiezhon...@comp.nus.edu.sg> > wrote: > > > Cmake does find protobuf and the compilation turns out errors as the > > protobuf library is installed with wrong settings. > > I am not sure about how it happens. > > Maybe homebrew causes the problem or perhaps wrong parameters are > > specified during installing. > > > > -----Original Message----- > > From: wangwei...@gmail.com [mailto:wangwei...@gmail.com] On Behalf > > Of Wang Wei > > Sent: Sunday, 17 July, 2016 9:35 PM > > To: dev@singa.incubator.apache.org > > Subject: Re: Problems on mac > > > > On Sun, Jul 17, 2016 at 9:25 PM, Xiezhongle > > <xiezhon...@comp.nus.edu.sg> > > wrote: > > > > > I think the problem is about the configuration when installing > Protobuf. > > > The make script sets the architecture as "x86_64" somehow. > > > > > Do you mean homebrew installs protobuf as 'x86_64'? > > and then cmake cannot find protobuf? > > > > > > > > -----Original Message----- > > > From: wangwei...@gmail.com [mailto:wangwei...@gmail.com] On Behalf > > > Of Wang Wei > > > Sent: Sunday, 17 July, 2016 9:23 PM > > > To: zhongle > > > Cc: dev@singa.incubator.apache.org > > > Subject: Re: Problems on mac > > > > > > What is the problem of homebrew? > > > I think people using MacOS would typically use homebrew just like > > > using 'sudo apt-get' for ubuntu OS. > > > > > > On Sun, Jul 17, 2016 at 7:28 PM, Erhard M. Dinhobl jun. < > > > e...@master-studios.net> wrote: > > > > > > > I built protobuf now from source! I also reconfigured my whole > > > > mac to get default configuration. Everything should be fine now! > > > > > > > > -- > > > > > > > > master-studios.net - Intelligent Software / Consulting / > > > > Research > > > > > > > > +43 (0)699 / 102 69 056, Vienna, Austria > > > > > > > > Am 17.07.2016 13:27, schrieb Erhard M. Dinhobl jun.: > > > > > > > > > Hi > > > > > > > > > > I first removed protobuf from brew (no install). then: > > > > > > > > > > CPATH=/usr/local/include > > > > > > > > > > DYLD_LIBRARY_PATH=/usr/local/lib > > > > > > > > > > LD_LIBRARY_PATH=/usr/local/lib > > > > > > > > > > LIBRARY_PATH=/usr/local/lib > > > > > > > > > > > > > > PATH=/usr/local/lib:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin > > > > :/ > > > > Li br > > > > ary/TeX/texbin:/Users/Erhard/Library/Developer/android-ndk-r10e > > > > > > > > > > I removed the build > > > > > > > > > > created it with: > > > > > > > > > > $ cmake .. > > > > > > > > > > $ make > > > > > > > > > > again: > > > > > > > > > > Undefined symbols for architecture x86_64: > > > > > "google::protobuf::Message::DebugString() const", referenced from: > > > > > singa::Channel::Send(google::protobuf::Message const&) in > > > > > channel.cc.o > > > > > > > > > "google::protobuf::Message::SerializeToOstream(std::__1::basic_o > > > > st re am <char, std::__1::char_traits<char> >*) const", > > > > referenced > > > > from: > > > > > singa::Channel::Send(google::protobuf::Message const&) in > > > > > channel.cc.o > > > > > ld: symbol(s) not found for architecture x86_64 > > > > > clang: error: linker command failed with exit code 1 (use -v > > > > > to see > > > > invocation) > > > > > make[2]: *** [lib/libsinga_utils.dylib] Error 1 > > > > > make[1]: *** [src/CMakeFiles/singa_utils.dir/all] Error 2 > > > > > > > > > > I checked every file. in the dylib files, there are evidences, > > > > > that > > > > those two methods are in. > > > > > > > > > > Anyone other a suggestion? > > > > > > > > > > -- > > > > > > > > > > master-studios.net - Intelligent Software / Consulting / > > > > > Research > > > > > > > > > > +43 (0)699 / 102 69 056, Vienna, Austria > > > > > > > > > > Am 16.07.2016 20:59, schrieb Xiezhongle: > > > > > > > > > >> Hi Erhard, > > > > >> > > > > >> I believe that the problem is caused by Protobuf, not SINGA. > > > > >> > > > > >> Could you please try to reinstall it? > > > > >> > > > > >> I suggest you compile Protobuf from source code instead of > > > > >> using > > > > homebrew. > > > > >> > > > > >> Best, > > > > >> > > > > >> Zhongle > > > > >> > > > > >> From: Erhard M. Dinhobl jun. [mailto:e...@master-studios.net] > > > > >> Sent: Sunday, 17 July, 2016 2:06 AM > > > > >> To: dev@singa.incubator.apache.org > > > > >> Cc: Xiezhongle > > > > >> Subject: RE: Problems on mac > > > > >> > > > > >> BTW: it would be greate because to get it up running because > > > > >> I invested > > > > now more than 40 hours in this problem and my mac is currently > > > > my main working station. > > > > >> > > > > >> -- > > > > >> > > > > >> master-studios.net - Intelligent Software / Consulting / > > > > >> Research > > > > >> > > > > >> +43 (0)699 / 102 69 056, Vienna, Austria > > > > >> > > > > >> Am 16.07.2016 19:40, schrieb Erhard M. Dinhobl jun.: > > > > >> > > > > >> Hi xiezhongle > > > > >> > > > > >> I motivated myself trying another run on mac (to work also at > > > > >> home and > > > > not in my bureau only, at home I have more time). I did: > > > > >> > > > > >> $ mkdir build > > > > >> > > > > >> $ cd build > > > > >> > > > > >> $ cmake > > > > -DPROTOBUF_INCLUDE_DIR:PATH=/usr/local/Cellar/protobuf/2.6.1/inc > > > > lu > > > > de > > > > \ > > > > >> > > > > --DPROTOBUF_LIBRARY:FILEPATH=/usr/local/Cellar/protobuf/2.6.1/li > > > > b/ > > > > li > > > > bp > > > > rotobuf.dylib > > > > \ > > > > >> > > > > -DPROTOBUF_LIBRARY_DEBUG:FILEPATH=/usr/local/Cellar/protobuf/2.6 > > > > .1 > > > > /l > > > > ib > > > > /libprotobuf.dylib > > > > \ > > > > >> > > > > -DPROTOBUF_LITE_LIBRARY:FILEPATH=/usr/local/Cellar/protobuf/2.6. > > > > 1/ > > > > li > > > > b/ > > > > libprotobuf-lite.dylib > > > > \ > > > > >> > > > > > -DPROTOBUF_LITE_LIBRARY_DEBUG:FILEPATH=/usr/local/Cellar/protobuf/2.6. > > > > 1/lib/libprotobuf-lite.dylib > > > > \ > > > > >> > > > > -DPROTOBUF_PROTOC_EXECUTABLE:FILEPATH=/usr/local/Cellar/protobuf > > > > /2 > > > > .6 > > > > .1 > > > > /bin/protoc > > > > \ > > > > >> > > > > -DPROTOBUF_PROTOC_LIBRARY:FILEPATH=/usr/local/Cellar/protobuf/2.6. > > > > 1/ > > > > li > > > > b/libprotoc.dylib > > > > \ > > > > >> > > > > > -DPROTOBUF_PROTOC_LIBRARY_DEBUG:FILEPATH=/usr/local/Cellar/protobuf/2. > > > > 6.1/lib/libprotoc.dylib > > > > \ > > > > >> -DUSE_CUDA=OFF -DUSE_CUDNN=OFF .. > > > > >> > > > > >> (those are all taken from the CMakeCache-File) > > > > >> > > > > >> and then: > > > > >> > > > > >> $ make > > > > >> > > > > >> result is again: > > > > >> > > > > >> Undefined symbols for architecture x86_64: > > > > >> "google::protobuf::Message::DebugString() const", referenced from: > > > > >> singa::Channel::Send(google::protobuf::Message const&) in > > > > >> channel.cc.o > > > > >> > > > > "google::protobuf::Message::SerializeToOstream(std::__1::basic_o > > > > st re am <char, std::__1::char_traits<char> >*) const", > > > > referenced > > > > from: > > > > >> singa::Channel::Send(google::protobuf::Message const&) in > > > > >> channel.cc.o > > > > >> ld: symbol(s) not found for architecture x86_64 > > > > >> clang: error: linker command failed with exit code 1 (use -v > > > > >> to see > > > > invocation) > > > > >> make[2]: *** [lib/libsinga_utils.dylib] Error 1 > > > > >> make[1]: *** [src/CMakeFiles/singa_utils.dir/all] Error 2 > > > > >> make: *** [all] Error 2 > > > > >> > > > > >> I don't know where to define the lib that it finds the x86_64 > arch. > > > > There exists every path and what ever. I really don't know. > > > > >> > > > > >> -- > > > > >> > > > > >> master-studios.net - Intelligent Software / Consulting / > > > > >> Research > > > > >> > > > > >> +43 (0)699 / 102 69 056, Vienna, Austria > > > > >> > > > > >> Am 04.07.2016 08:52, schrieb Xiezhongle: > > > > >> > > > > >> Hi Erhard, > > > > >> > > > > >> Please check your export parameters. > > > > >> It should be something like: > > > > >> export > > > > >> LIBRARY_PATH=/usr/local/Cellar/protobuf/2.6.1/lib:$LIBRARY_PA > > > > >> TH > > > > >> ...... > > > > >> You missed the "/lib". > > > > >> > > > > >> And also, if the folder installed by homebrew is not included > > > > >> in the > > > > bash > > > > >> settings, please use the following command under > "incubator-singa/" > > > > folder: > > > > >> mkdir build && cd build > > > > >> cmake > > > > >> -DProtobuf_SRC_ROOT_FOLDER=/usr/local/Cellar/protobuf/2.6.1 > > > > >> -DUSE_CUDA=OFF -DUSE_CUDNN=OFF .. > > > > >> make > > > > >> > > > > >> Please try and let me know if you have other problems. > > > > >> > > > > >> Best, > > > > >> zhongle > > > > >> > > > > >> -----Original Message----- > > > > >> From: Erhard M. Dinhobl jun. [mailto:e...@master-studios.net] > > > > >> Sent: Monday, 4 July, 2016 12:51 PM > > > > >> To: Apache Singa Dev > > > > >> Subject: Problems on mac > > > > >> > > > > >> Hi > > > > >> > > > > >> I am on to get singa up running under mac. I will write a > > > > >> developer introduction on this. but one problem. I get the > > > > >> following message > > > > >> > > > > >> Undefined symbols for architecture x86_64: > > > > >> "google::protobuf::Message::DebugString() const", referenced from: > > > > >> singa::Channel::Send(google::protobuf::Message const&) in > > > > >> channel.cc.o > > > > >> > > > > >> > > > > "google::protobuf::Message::SerializeToOstream(std::__1::basic_o > > > > st > > > > re > > > > am > > > > <char, > > > > >> std::__1::char_traits<char> >*) const", referenced from: > > > > >> singa::Channel::Send(google::protobuf::Message const&) in > > > > >> channel.cc.o > > > > >> ld: symbol(s) not found for architecture x86_64 > > > > >> clang: error: linker command failed with exit code 1 (use -v > > > > >> to see > > > > >> invocation) > > > > >> make[2]: *** [lib/libsinga_utils.dylib] Error 1 > > > > >> make[1]: *** [src/CMakeFiles/singa_utils.dir/all] Error 2 > > > > >> make: *** [all] Error 2 > > > > >> > > > > >> I installed protobuf 2.6.0 and set the variables via: > > > > >> > > > > >> export LD_LIBRARY_PATH=/usr/local/Cellar/protobuf/2.6.1/ > > > > >> > > > > >> export LIBRARY_PATH=/usr/local/Cellar/protobuf/2.6.1/ > > > > >> > > > > >> export DYLD_LIBRARY_PATH=/usr/local/Cellar/protobuf/2.6.1/ > > > > >> > > > > >> maybe someone has a hint.... > > > > >> > > > > >> -- > > > > >> > > > > >> master-studios.net - Intelligent Software / Consulting / > > > > >> Research > > > > >> > > > > >> +43 (0)699 / 102 69 056, Vienna, Austria > > > > > > > > > > > > > > > >
