Did you get rid of the entries in slider-client.xml? I am surprised that
your RM is running at port 8032. The typical default port is 8050. Can you
check /etc/hadoop/conf/yarn-site.xml and see what is
yarn.resourcemanager.address set to?

-Gour

On 8/28/15, 3:51 AM, "Vijaya Narayana Reddy Bhoomi Reddy"
<[email protected]> wrote:

>Hi Gour,
>
>I tried modifying the Hadoop conf entry in slider-env.sh file.I have
>updated it as below:
>
>export HADOOP_CONF_DIR=/etc/hadoop/conf
>
>But this also didnt yield any favourable results.
>
>As Tim mentioned, I shall try setting some other application probably
>HBase
>to see if the problem is Solr specific or Slider in general. In the
>meantime, do you have any other suggestions?
>
>When I run the command slider install-package command, it completed with
>status 0 and I could see the files under .slider folder on HDFS. The issue
>is with slider create command where its not able to connect to the
>resource
>manager, though RM deamon is running fine.
>
>
>Thanks & Regards
>Vijay
>
>
>
>
>
>On 27 August 2015 at 18:41, Gour Saha <[email protected]> wrote:
>
>> Since you have HDP, instead of setting the props in slider-client.xml, I
>> would suggest setting HADOOP_CONF_DIR in slider-env.sh (available in the
>> same folder) to /etc/hadoop/conf and see if that helps.
>>
>> -Gour
>>
>> On 8/27/15, 2:48 PM, "Timothy Potter" <[email protected]> wrote:
>>
>> >Hi Vijay,
>> >
>> >Are you able to create any other apps using slider create in your env?
>> >If so, that rules out any general issues and points to something
>> >specific to the Slider packaging for Solr.
>> >
>> >Tim
>> >
>> >On Thu, Aug 27, 2015 at 3:30 PM, Vijay Bhoomireddy
>> ><[email protected]> wrote:
>> >> Hi,
>> >>
>> >>
>> >>
>> >> I am facing some issue while setting up Solr on Hadoop using Slider.
>>I
>> >>am
>> >> using HDP 2.3which has got Slider 0.80. I am following LucidWorks
>>blog
>> >>at
>> >> https://github.com/LucidWorks/solr-slider for the same. I already
>>have
>> a
>> >> single node Hortonworks HDP cluster. When I try to setup Solr on my
>>HDP
>> >> cluster using Slider, I am facing some issues.
>> >>
>> >>
>> >>
>> >> As per the blog, I have performed the below steps:
>> >>
>> >>
>> >>
>> >> 1.       I have setup a single node HDP cluster for which the
>>hostname
>> >>is
>> >> myhdpcluster.com with all the essential services including ZooKeeper
>> and
>> >> Slider running on it.
>> >>
>> >> 2.       Updated the resource manager address and port in
>> >>slider-client.xml
>> >> present under /usr/hdp/current/slider-client/conf
>> >>
>> >> <property>
>> >>
>> >>         <name>yarn.resourcemanager.address</name>
>> >>
>> >> <value> myhdpcluster.com:8032</value>
>> >>
>> >> </property>
>> >>
>> >> 3.       Cloned the LucidWorks git and moved it under
>> >>/home/hdfs/solr-slider
>> >>
>> >> 4.       Downloaded solr latest stable distribution and renamed it as
>> >> solr.tgz and placed it under
>> >>/home/hdfs/solr-slider/package/files/solr.tgz
>> >>
>> >> 5.       Next ran the following command from within the
>> >> /home/hdfs/solr-slider folder
>> >>
>> >> zip -r solr-on-yarn.zip metainfo.xml package/
>> >>
>> >> 6.       Next ran the following command as hdfs user
>> >>
>> >> slider install-package --replacepkg --name solr --package
>> >> /home/hdfs/solr-slider/solr-on-yarn.zip
>> >>
>> >> 7.       Modified the following settings in the
>> >> /home/hdfs/solr-slider/appConfig-default.json file
>> >>
>> >> "java_home": MY_JAVA_HOME_LOCATION
>> >>
>> >>     "site.global.app_root":
>>"${AGENT_WORK_ROOT}/app/install/solr-5.2.1",
>> >> (Should this be changed to any other value?)
>> >>
>> >>     "site.global.zk_host": " myhdpcluster.com:2181",
>> >>
>> >> 8.       Set yarn.component.instances to 1 in resources-default.json
>> >>file
>> >>
>> >> 9.       Next ran the following command
>> >>
>> >> slider create solr --template
>> >>/home/hdfs/solr-slider/appConfig-default.json
>> >> --resources /home/hdfs/solr-slider/resources-default.json
>> >>
>> >>
>> >>
>> >> During this step, I am seeing an message INFO client.RMProxy -
>> >>Connecting to
>> >> ResourceManager at myhdpcluster.com/10.0.2.15:8032
>> >>
>> >>
>> >> INFO ipc.Client - Retrying connect to server:
>> >> myhdpcluster.com/10.0.2.15:8032. Already tried 0 time(s);
>> >>
>> >>
>> >>
>> >> This message keeps repeating for 50 times and then pauses for a
>>couple
>> >>of
>> >> seconds and then prints the same message in a loop eternally. Not
>>sure
>> >>on
>> >> where the problem is. I verified the Resource Manager URL and its
>> >>pointing
>> >> correctly. In my case, it's myhdpcluster.com:8032 I even tried
>>passing
>> >> --manager param to the slider create solr command, but without any
>>luck.
>> >>
>> >> I am able to login to Ambari console and see all the services running
>> >>fine ,
>> >> including YARN related and ZooKeeper. Also, I could login to Resource
>> >> Manager's web UI as well and its working fine.
>> >>
>> >>
>> >>
>> >> Here is the complete content of the appConfig-default.json file. I
>> >>haven't
>> >> worked with Slider so far, so not very sure if some mistake has crept
>> >>into
>> >> this file while modifying it as per the changes mentioned by
>>Lucidworks
>> >>on
>> >> the Github page. However, I tried to simulate the steps mentioned on
>>the
>> >> Github Solr-Slider page. As you can see from below file, I am using
>> >>Java 7.
>> >>
>> >>
>> >>
>> >> {
>> >>
>> >>   "schema": "http://example.org/specification/v2.0.0";,
>> >>
>> >>   "metadata": {
>> >>
>> >>   },
>> >>
>> >>   "global": {
>> >>
>> >>     "application.def": "/home/hdfs/solr-slider/solr-on-yarn.zip",
>> >>
>> >>     "java_home": "/usr/lib/jvm/jre-1.7.0-openjdk.x86_64",
>> >>
>> >>     "site.global.app_root":
>> >> "${AGENT_WORK_ROOT}/app/install/solr-5.2.1-SNAPSHOT",
>> >>
>> >>     "site.global.zk_host": "myhdpcluster.com:2181",
>> >>
>> >>     "site.global.solr_host": "${SOLR_HOST}",
>> >>
>> >>     "site.global.listen_port": "${SOLR.ALLOCATED_PORT}",
>> >>
>> >>     "site.global.xmx_val": "1g",
>> >>
>> >>     "site.global.xms_val": "1g",
>> >>
>> >>     "site.global.gc_tune": "-XX:NewRatio=3 -XX:SurvivorRatio=4
>> >> -XX:TargetSurvivorRatio=90 -XX:MaxTenuringThreshold=8
>> >> -XX:+UseConcMarkSweepGC -XX:+UseParNewGC -XX:ConcGCThreads=4
>> >> -XX:ParallelGCThreads=4 -XX:+CMSScavengeBeforeRemark
>> >> -XX:PretenureSizeThreshold=64m -XX:+UseCMSInitiatingOccupancyOnly
>> >> -XX:CMSInitiatingOccupancyFraction=50
>> >>-XX:CMSMaxAbortablePrecleanTime=6000
>> >> -XX:+CMSParallelRemarkEnabled -XX:+ParallelRefProcEnabled -verbose:gc
>> >> -XX:+PrintHeapAtGC -XX:+PrintGCDetails -XX:+PrintGCDateStamps
>> >> -XX:+PrintTenuringDistribution -XX:+PrintGCApplicationStoppedTime",
>> >>
>> >>     "site.global.zk_timeout": "15000",
>> >>
>> >>     "site.global.server_module": "--module=http",
>> >>
>> >>     "site.global.stop_key": "solrrocks",
>> >>
>> >>     "site.global.solr_opts": ""
>> >>
>> >>   },
>> >>
>> >>   "components": {
>> >>
>> >>     "slider-appmaster": {
>> >>
>> >>       "jvm.heapsize": "512M"
>> >>
>> >>     },
>> >>
>> >>     "SOLR": {
>> >>
>> >>     }
>> >>
>> >>   }
>> >>
>> >> }
>> >>
>> >>
>> >>
>> >> Can anyone please let me know what could have gone wrong with my
>> >> configuration and what changes need to be made to get it working?
>>Many
>> >> thanks in advance.
>> >>
>> >>
>> >>
>> >> Thanks & Regards
>> >>
>> >> Vijay
>> >>
>> >>
>> >> --
>> >> The contents of this e-mail are confidential and for the exclusive
>>use
>> >>of
>> >> the intended recipient. If you receive this e-mail in error please
>> >>delete
>> >> it from your system immediately and notify us either by e-mail or
>> >> telephone. You should not copy, forward or otherwise disclose the
>> >>content
>> >> of the e-mail. The views expressed in this communication may not
>> >> necessarily be the view held by WHISHWORKS.
>> >
>>
>>
>
>-- 
>The contents of this e-mail are confidential and for the exclusive use of
>the intended recipient. If you receive this e-mail in error please delete
>it from your system immediately and notify us either by e-mail or
>telephone. You should not copy, forward or otherwise disclose the content
>of the e-mail. The views expressed in this communication may not
>necessarily be the view held by WHISHWORKS.

Reply via email to