Thomas,
zookeeper-operator:
> crd:
> create: false
> install: false
> use: false
>
> This configuration leads to following error log:
>
> 2021-04-22T10:03:25.816Z ERROR controller-runtime.source if kind is a CRD,
> it should be installed before calling Start {"kind": "
> ZookeeperCluster.zookeeper.pravega.io
> <http://zookeepercluster.zookeeper.pravega.io/>", "error": "no matches
> for kind \"ZookeeperCluster\" in version \"zookeeper.pravega.io/v1beta1\
> <http://zookeeper.pravega.io/v1beta1%5C>""}
>
Thanks for testing this out. This is certainly a bug, and one that has
apparently been there for quite a while. It's a good catch and will
certainly require an RC3.
As for this:
W0422 10:14:10.474780 1 warnings.go:70] networking.k8s.io/v1beta1 Ingress
> is deprecated in v1.19+, unavailable in v1.22+; use networking.k8s.io/v1
> Ingress
>
It's a non-issue and the result of the Solr Operator supporting a range of
Kubernetes versions. We will upgrade the Ingress version at some point
after 1.22 is released and 1.19 is more common.
Please continue testing (with the zk-operator enabled for now), and make
sure that the rest of your use case works with this candidate. That way
v0.3.0 RC3 will be even more likely to succeed!
- Houston
On Thu, Apr 22, 2021 at 5:17 AM Thomas Wöckinger <
thomas.woeckin...@gmail.com> wrote:
> When using all-with-dependencies.yaml the error does not occur, but i
> think it should be not required to install CRDs which should not be used.
>
> Following warning shows up during installation:
>
> W0422 10:14:10.474780 1 warnings.go:70] networking.k8s.io/v1beta1
> Ingress is deprecated in v1.19+, unavailable in v1.22+; use
> networking.k8s.io/v1 Ingress
>
> On Thu, Apr 22, 2021 at 12:11 PM Thomas Wöckinger <
> thomas.woeckin...@gmail.com> wrote:
>
>> I forgot to mention that i installed the all.yaml and not
>> all-with-dependencies.yaml from the crds folder
>>
>> On Thu, Apr 22, 2021 at 12:08 PM Thomas Wöckinger <
>> thomas.woeckin...@gmail.com> wrote:
>>
>>> I tried to install the operator with disabled zookeeper, because i want
>>> to manage my own
>>>
>>>
>>> zookeeper-operator:
>>> crd:
>>> create: false
>>> install: false
>>> use: false
>>>
>>> This configuration leads to following error log:
>>>
>>> 2021-04-22T10:03:25.816Z ERROR controller-runtime.source if kind is a
>>> CRD, it should be installed before calling Start {"kind": "
>>> ZookeeperCluster.zookeeper.pravega.io", "error": "no matches for kind
>>> \"ZookeeperCluster\" in version \"zookeeper.pravega.io/v1beta1\
>>> <http://zookeeper.pravega.io/v1beta1%5C>""}
>>> github.com/go-logr/zapr.(*zapLogger).Error
>>> /go/pkg/mod/github.com/go-logr/zapr@v0.2.0/zapr.go:132
>>> sigs.k8s.io/controller-runtime/pkg/source.(*Kind).Start
>>> /go/pkg/mod/
>>> sigs.k8s.io/controller-runtime@v0.6.2/pkg/source/source.go:117
>>>
>>> sigs.k8s.io/controller-runtime/pkg/internal/controller.(*Controller).Start.func1
>>> /go/pkg/mod/
>>> sigs.k8s.io/controller-runtime@v0.6.2/pkg/internal/controller/controller.go:140
>>>
>>> sigs.k8s.io/controller-runtime/pkg/internal/controller.(*Controller).Start
>>> /go/pkg/mod/
>>> sigs.k8s.io/controller-runtime@v0.6.2/pkg/internal/controller/controller.go:175
>>>
>>> sigs.k8s.io/controller-runtime/pkg/manager.(*controllerManager).startRunnable.func1
>>> /go/pkg/mod/
>>> sigs.k8s.io/controller-runtime@v0.6.2/pkg/manager/internal.go:661
>>> 2021-04-22T10:03:25.816Z INFO controller Stopping workers
>>> {"reconcilerGroup": "solr.apache.org", "reconcilerKind": "SolrBackup",
>>> "controller": "solrbackup"}
>>> 2021-04-22T10:03:25.816Z INFO controller Stopping workers
>>> {"reconcilerGroup": "solr.apache.org", "reconcilerKind":
>>> "SolrPrometheusExporter", "controller": "solrprometheusexporter"}
>>> 2021-04-22T10:03:25.816Z ERROR controller-runtime.manager error received
>>> after stop sequence was engaged {"error": "context canceled"}
>>> github.com/go-logr/zapr.(*zapLogger).Error
>>> /go/pkg/mod/github.com/go-logr/zapr@v0.2.0/zapr.go:132
>>>
>>> sigs.k8s.io/controller-runtime/pkg/manager.(*controllerManager).engageStopProcedure.func1
>>> /go/pkg/mod/
>>> sigs.k8s.io/controller-runtime@v0.6.2/pkg/manager/internal.go:521
>>> 2021-04-22T10:03:25.816Z ERROR setup problem running manager {"error":
>>> "no matches for kind \"ZookeeperCluster\" in version \"
>>> zookeeper.pravega.io/v1beta1\ <http://zookeeper.pravega.io/v1beta1%5C>
>>> ""}
>>> github.com/go-logr/zapr.(*zapLogger).Error
>>> /go/pkg/mod/github.com/go-logr/zapr@v0.2.0/zapr.go:132
>>> main.main
>>> /workspace/main.go:179
>>> runtime.main
>>> /usr/local/go/src/runtime/proc.go:225
>>>
>>> So it seems there is still a CRD or something else required
>>>
>>>
>>> On Thu, Apr 22, 2021 at 10:10 AM Thomas Wöckinger <
>>> thomas.woeckin...@gmail.com> wrote:
>>>
>>>> Timothy can you provide an example yaml of your cluster, i am reading
>>>> through the CRDs, but i am not sure about BASIC AUTH.
>>>> The description says that two users will be created during bootstrap,
>>>> but where can I find the generated passwords?
>>>>
>>>> Thx for your time!
>>>>
>>>>
>>>> On Thu, Apr 22, 2021 at 1:08 AM Timothy Potter <thelabd...@gmail.com>
>>>> wrote:
>>>>
>>>>> +1 (binding)
>>>>>
>>>>> Ran the smoke tester and deployed a 3-node to GKE with TLS + basic
>>>>> auth + anti-affinity + auto-scaling policy + prom / grafana metrics +
>>>>> zone aware query routing ~ the works!
>>>>>
>>>>> Thank you for the amazing work on this release Houston.
>>>>>
>>>>> On Wed, Apr 21, 2021 at 3:55 PM Houston Putman <hous...@apache.org>
>>>>> wrote:
>>>>> >
>>>>> > Please vote for release candidate 2 for the Solr Operator v0.3.0
>>>>> >
>>>>> > The artifacts can be downloaded from:
>>>>> >
>>>>> https://dist.apache.org/repos/dist/dev/solr/solr-operator/solr-operator-v0.3.0-RC2-rev4ec41cb3ebf879b352dc08ae5f789c6ff86b7a04
>>>>> >
>>>>> > You can run the full smoke tester, with instructions below.
>>>>> > However, it is also encouraged to go and use the artifacts yourself
>>>>> in a test Kubernetes cluster.
>>>>> > The smoke tester does not require you to download or install the RC
>>>>> artifacts before running.
>>>>> > If you plan on just running the smoke tests, then ignore all other
>>>>> instructions.
>>>>> >
>>>>> > The artifacts are layed out in the following way:
>>>>> > * solr-operator-v0.3.0.tgz - Contains the source release
>>>>> > * crds/ - Contains the CRD files
>>>>> > * helm/ - Contains the Helm release packages
>>>>> >
>>>>> > The RC Docker image can be found at:
>>>>> > apache/solr-operator:v0.3.0-rc2
>>>>> >
>>>>> > The RC Helm repo can be added with:
>>>>> > helm repo add solr-operator-rc
>>>>> https://dist.apache.org/repos/dist/dev/solr/solr-operator/solr-operator-v0.3.0-RC2-rev4ec41cb3ebf879b352dc08ae5f789c6ff86b7a04/helm-charts
>>>>> >
>>>>> > You can install the RC Solr Operator and Solr CRDs with:
>>>>> > curl -sL0 "https://dist.apache.org/repos/dist/release/solr/KEYS";
>>>>> | gpg --import --quiet
>>>>> > # This will export your public keys into a format that helm can
>>>>> understand.
>>>>> > # Skip verification by removing "--verify" in the helm command
>>>>> below.
>>>>> > if ! (gpg --no-default-keyring --keyring=~/.gnupg/pubring.gpg
>>>>> --list-keys "98F3F6EC"); then gpg --export >~/.gnupg/pubring.gpg; fi
>>>>> > kubectl create -f
>>>>> https://dist.apache.org/repos/dist/dev/solr/solr-operator/solr-operator-v0.3.0-RC2-rev4ec41cb3ebf879b352dc08ae5f789c6ff86b7a04/crds/all-with-dependencies.yaml
>>>>> || \
>>>>> > kubectl replace -f
>>>>> https://dist.apache.org/repos/dist/dev/solr/solr-operator/solr-operator-v0.3.0-RC2-rev4ec41cb3ebf879b352dc08ae5f789c6ff86b7a04/crds/all-with-dependencies.yaml
>>>>> > helm install --verify solr-operator solr-operator-rc/solr-operator
>>>>> --set image.tag=v0.3.0-rc2
>>>>> >
>>>>> > You can run the full smoke tester directly with this command: (First
>>>>> checkout the release-0.3 branch of the solr-operator)
>>>>> >
>>>>> > ./hack/release/smoke_test/smoke_test.sh -v "v0.3.0" -s "4ec41cb" -i
>>>>> "apache/solr-operator:v0.3.0-rc2" -g "98F3F6EC" \
>>>>> > -l '
>>>>> https://dist.apache.org/repos/dist/dev/solr/solr-operator/solr-operator-v0.3.0-RC2-rev4ec41cb3ebf879b352dc08ae5f789c6ff86b7a04
>>>>> '
>>>>> >
>>>>> > Make sure you have the following installed before running the smoke
>>>>> test:
>>>>> > - Docker (Give it enough memory and CPU to run ~12 containers, 3
>>>>> of which are Solr nodes)
>>>>> > - Go 1.16
>>>>> > - Kubectl
>>>>> > - GnuPG
>>>>> > - Helm v3.4.0+
>>>>> > - Kustomize (v4.0.0+) This will be installed for you, but NOT
>>>>> upgraded if a lower version is already installed.
>>>>> > - yq
>>>>> > - jq
>>>>> > - coreutils (if using Mac OS)
>>>>> >
>>>>> > The vote will be open for at least 72 hours i.e. until 2021-04-26
>>>>> 19:00 UTC. (Extended due to the weekend)
>>>>> >
>>>>> > [ ] +1 approve
>>>>> > [ ] +0 no opinion
>>>>> > [ ] -1 disapprove (and reason why)
>>>>> >
>>>>> > Here is my +1
>>>>>
>>>>> ---------------------------------------------------------------------
>>>>> To unsubscribe, e-mail: dev-unsubscr...@solr.apache.org
>>>>> For additional commands, e-mail: dev-h...@solr.apache.org
>>>>>
>>>>>
