[
https://issues.apache.org/jira/browse/SQOOP-1168?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel
]
Veena Basavaraj updated SQOOP-1168:
-----------------------------------
Description:
Initial plan is to follow roughly the same design as Sqoop 1, except provide
pluggability to start this through a REST API.
This comment applies to every sub task
{code}
WIP ( so do not consider this as a final design)
{code}
Relevant code in Sqoop 1 ( to ensure parity with tests and features )
https://github.com/apache/sqoop/blob/trunk/src/java/org/apache/sqoop/tool/ImportTool.java
https://github.com/apache/sqoop/blob/trunk/src/java/org/apache/sqoop/mapreduce/MergeJob.java
https://github.com/apache/sqoop/blob/trunk/src/java/org/apache/sqoop/util/AppendUtils.java
https://github.com/apache/sqoop/blob/trunk/src/test/com/cloudera/sqoop/TestAppendUtils.java
https://github.com/apache/sqoop/blob/trunk/src/test/org/apache/sqoop/manager/oracle/OracleIncrementalImportTest.java
https://github.com/apache/sqoop/blob/trunk/src/test/com/cloudera/sqoop/TestIncrementalImport.java
Random thoughts?
1. Do we need the 2 modes,simpler sequential / append case based on a simple
predicate ( that can be the default) and more generic random set of records (
based on a complex predicate ). The only reason these 2 modes might make sense,
is the simple append use case can be for majority of the part be handled by
the sqoop. There is very little logic to add per connector.
The more complex case where we can have random selection of records to read and
even write them out in many different ways requires a custom logic. We can
certainly provide some common implementation of doing such updates, such as
writing a new dataset for the delta records and the merging duplicate row data
sets based on the last updated value.
2. What are the phases of the Incremental read/ write process for each
connector look like?. Should this be independent stage in the job lifecycle
complementing the Extractor or another api on the Extractor to do deltaExtract
or just another config object on the FromJobConfiguration where the computed
predicate string ( combination of raw predicate and the last value from the
FromConfig of the job)?
Seems like just a field on the FromJobConfiguration suffices. It can be used
both in the Partitioner and Extractor.
The FromJobConfiguration can have a dynamically created config object in its
list that is reserved for all the incremental related fields. One of the field
in it will be the following predicate.
Say one way of supporting predicate is via a proper schema like this.
{code}
{
type : "append"
columns : "id"
operator : ">="
value : "34"
}
{code}
The FromJobConfiguration might have the actual query string WHERE id > = '34'
in the string format. Alternatively. If we do not go with the predicates and
use loose fields like in Sqoop1, then the FromJobConfiguration will hold these
fields and its values. The FromConfig will hold the last processed value, so
that it can be used in the subsequent runs to indicate from where to start.
3. Similarly in terms of Writing /Loading, the ToJobConfiguration will have
information in it to indicate if this was a delta write. Based on the predicate
type/ modes ( SEQUENTIAL( APPEND) / RANDOM) , the loader can decide how to
write the data.
4. Does storing the last-processed-value in the job submission make it easier?
in that case we would need 2 fields, the last_read_value for the FROM side and
the last_written_value for the TO. I would consider submission, since these
values are a result of job run...but still store predicate in the job config (
with the given last value )
5. Even the last step, very inaptly names Destroyer, after successful might
need this info to finally record the values in the submission / configs and
other related stats of the incremental read/ writes ..So the FROM and the TO
destroyer will need to do this part.
was:
Initial plan is to follow roughly the same design as Sqoop 1, except provide
pluggability to start this through a REST API.
This comment applies to every sub task
{code}
WIP ( so do not consider this as a final design)
{code}
Random thoughts?
1. Do we need the 2 modes,simpler sequential / append case based on a simple
predicate ( that can be the default) and more generic random set of records (
based on a complex predicate ). The only reason these 2 modes might make sense,
is the simple append use case can be for majority of the part be handled by
the sqoop. There is very little logic to add per connector.
The more complex case where we can have random selection of records to read and
even write them out in many different ways requires a custom logic. We can
certainly provide some common implementation of doing such updates, such as
writing a new dataset for the delta records and the merging duplicate row data
sets based on the last updated value.
2. What are the phases of the Incremental read/ write process for each
connector look like?. Should this be independent stage in the job lifecycle
complementing the Extractor or another api on the Extractor to do deltaExtract
or just another config object on the FromJobConfiguration where the computed
predicate string ( combination of raw predicate and the last value from the
FromConfig of the job)?
Seems like just a field on the FromJobConfiguration suffices. It can be used
both in the Partitioner and Extractor.
The FromJobConfiguration can have a dynamically created config object in its
list that is reserved for all the incremental related fields. One of the field
in it will be the following predicate.
Say one way of supporting predicate is via a proper schema like this.
{code}
{
type : "append"
columns : "id"
operator : ">="
value : "34"
}
{code}
The FromJobConfiguration might have the actual query string WHERE id > = '34'
in the string format. Alternatively. If we do not go with the predicates and
use loose fields like in Sqoop1, then the FromJobConfiguration will hold these
fields and its values. The FromConfig will hold the last processed value, so
that it can be used in the subsequent runs to indicate from where to start.
3. Similarly in terms of Writing /Loading, the ToJobConfiguration will have
information in it to indicate if this was a delta write. Based on the predicate
type/ modes ( SEQUENTIAL( APPEND) / RANDOM) , the loader can decide how to
write the data.
4. Does storing the last-processed-value in the job submission make it easier?
in that case we would need 2 fields, the last_read_value for the FROM side and
the last_written_value for the TO. I would consider submission, since these
values are a result of job run...but still store predicate in the job config (
with the given last value )
5. Even the last step, very inaptly names Destroyer, after successful might
need this info to finally record the values in the submission / configs and
other related stats of the incremental read/ writes ..So the FROM and the TO
destroyer will need to do this part.
> Sqoop2: Incremental From/To ( formerly called Incremental Import )
> ------------------------------------------------------------------
>
> Key: SQOOP-1168
> URL: https://issues.apache.org/jira/browse/SQOOP-1168
> Project: Sqoop
> Issue Type: Bug
> Reporter: Hari Shreedharan
> Assignee: Veena Basavaraj
> Fix For: 1.99.5
>
>
> Initial plan is to follow roughly the same design as Sqoop 1, except provide
> pluggability to start this through a REST API.
> This comment applies to every sub task
> {code}
> WIP ( so do not consider this as a final design)
> {code}
> Relevant code in Sqoop 1 ( to ensure parity with tests and features )
> https://github.com/apache/sqoop/blob/trunk/src/java/org/apache/sqoop/tool/ImportTool.java
> https://github.com/apache/sqoop/blob/trunk/src/java/org/apache/sqoop/mapreduce/MergeJob.java
> https://github.com/apache/sqoop/blob/trunk/src/java/org/apache/sqoop/util/AppendUtils.java
> https://github.com/apache/sqoop/blob/trunk/src/test/com/cloudera/sqoop/TestAppendUtils.java
> https://github.com/apache/sqoop/blob/trunk/src/test/org/apache/sqoop/manager/oracle/OracleIncrementalImportTest.java
> https://github.com/apache/sqoop/blob/trunk/src/test/com/cloudera/sqoop/TestIncrementalImport.java
> Random thoughts?
> 1. Do we need the 2 modes,simpler sequential / append case based on a simple
> predicate ( that can be the default) and more generic random set of records (
> based on a complex predicate ). The only reason these 2 modes might make
> sense, is the simple append use case can be for majority of the part be
> handled by the sqoop. There is very little logic to add per connector.
> The more complex case where we can have random selection of records to read
> and even write them out in many different ways requires a custom logic. We
> can certainly provide some common implementation of doing such updates, such
> as writing a new dataset for the delta records and the merging duplicate row
> data sets based on the last updated value.
> 2. What are the phases of the Incremental read/ write process for each
> connector look like?. Should this be independent stage in the job lifecycle
> complementing the Extractor or another api on the Extractor to do
> deltaExtract or just another config object on the FromJobConfiguration where
> the computed predicate string ( combination of raw predicate and the last
> value from the FromConfig of the job)?
> Seems like just a field on the FromJobConfiguration suffices. It can be used
> both in the Partitioner and Extractor.
> The FromJobConfiguration can have a dynamically created config object in its
> list that is reserved for all the incremental related fields. One of the
> field in it will be the following predicate.
> Say one way of supporting predicate is via a proper schema like this.
> {code}
> {
> type : "append"
> columns : "id"
> operator : ">="
> value : "34"
> }
> {code}
> The FromJobConfiguration might have the actual query string WHERE id > =
> '34' in the string format. Alternatively. If we do not go with the predicates
> and use loose fields like in Sqoop1, then the FromJobConfiguration will hold
> these fields and its values. The FromConfig will hold the last processed
> value, so that it can be used in the subsequent runs to indicate from where
> to start.
> 3. Similarly in terms of Writing /Loading, the ToJobConfiguration will have
> information in it to indicate if this was a delta write. Based on the
> predicate type/ modes ( SEQUENTIAL( APPEND) / RANDOM) , the loader can
> decide how to write the data.
> 4. Does storing the last-processed-value in the job submission make it
> easier? in that case we would need 2 fields, the last_read_value for the FROM
> side and the last_written_value for the TO. I would consider submission,
> since these values are a result of job run...but still store predicate in the
> job config ( with the given last value )
> 5. Even the last step, very inaptly names Destroyer, after successful might
> need this info to finally record the values in the submission / configs and
> other related stats of the incremental read/ writes ..So the FROM and the TO
> destroyer will need to do this part.
--
This message was sent by Atlassian JIRA
(v6.3.4#6332)
