in that case most likely not ...
>> Users can validate if they are affected by this by checking the "OSGI
>> Installer" tab of the Felix Webconsole
>> (http://{host}/system/console/osgi-installer). At the bottom you
>> should see something like:
>>
>> bundleinstall:/{name}.solrindex.ref IGNORED
>>
>> If this line notes INSTALLED than you are not affected and the error
>> is caused by something else.
>>
have you checked this? This is the best indication if your problem is
related to STANBOL-1023 or not.
If not it would be good if you could provide loggings from the
installation process (staring from the moment when you installed the
"o.a.s.data.sites.{name}" bundle to the OSGI environment.
For testing it would be also good to have the index you created around
- if you can share those.
best
Rupert
>> As Workaround users need to stop/start the "o.a.s.data.sites.{name}"
>> bundle as this will restart the installation process of the site.
>>
>> Note also that this only happens on the first startup after you copied
>> the o.a.s.data.sites.{name} bundle to the fileinstall folder. Normal
>> restarts of the server are not affected. Also installing a new site to
>> a running server works as expected.
>>
>> In any other case you should see according Exceptions in the
>> "stanbol/logs/error.logs" file.
>>
>> Note also that since STANBOL-996 ReferencedSites are only registered
>> after that the SolrIndex with the data has been initialized. This
>> means that - especially for larger indexes - it might take some time
>> until the RESTful service becomes available.
>>
>> best
>> Rupert
>>
>> On Tue, Apr 9, 2013 at 10:40 PM, [email protected] <[email protected]>
>> wrote:
>> > I've indexed a pair of RDF accretions for use with the Stanbol EntityHub:
>> >
>> > 1) GeoNames, using the GeoNames indexer
>> > 2) The Library of Congress Subject Heading system, using the generic RDF
>> indexer
>> >
>> > Everything went quite well.
>> >
>> > Now I've installed the data files in the appropriate directory in my
>> Stanbol instance, and under the Data File Provider tab in the system
>> console they appear with state ACTIVE. I've installed the corresponding
>> bundles, and in the Bundles tab they appear with status Active. But they do
>> not appear as available sites and the appropriate endpoints (e.g.
>> /entityhub/site/geonames) don't respond (404).
>> >
>> > Any thoughts as to what I might be doing wrong?
>> >
>> > ---
>> > A. Soroka
>> > The University of Virginia Library
>> >
>>
>>
>>
>> --
>> | Rupert Westenthaler [email protected]
>> | Bodenlehenstraße 11 ++43-699-11108907
>> | A-5500 Bischofshofen
>>
--
| Rupert Westenthaler [email protected]
| Bodenlehenstraße 11 ++43-699-11108907
| A-5500 Bischofshofen
