Ultimately, I got it working: cmueller$ cd jzmq cmueller$ touch src/classdist_noinst.stamp
cmueller$ cd src cmueller$ javac -d . org/zeromq/*.java cmueller$ cd .. cmueller$ make cmueller$ sudo make install ... Change into my local storm workspace: cmueller$ cd jzmq cmueller$ lein sub install Reading project from storm-console-logging Created /Users/cmueller/workspaceProjectX/storm/storm-console-logging/target/storm-console-logging-0.9.0-rc3.jar Wrote /Users/cmueller/workspaceProjectX/storm/storm-console-logging/pom.xml Reading project from storm-core Compiling backtype.storm.messaging.zmq Compiling backtype.storm.metric.testing Compiling backtype.storm.scheduler.IsolationScheduler Compiling backtype.storm.testing4j Compiling backtype.storm.ui.core Compiling backtype.storm.ui.helpers Compiling storm.trident.testing Compiling zilch.mq Created /Users/cmueller/workspaceProjectX/storm/storm-core/target/storm-core-0.9.0-rc3.jar Wrote /Users/cmueller/workspaceProjectX/storm/storm-core/pom.xml Reading project from storm-netty Retrieving org/clojure/clojure/1.5.1/clojure-1.5.1.pom from central Retrieving org/clojure/clojure/1.5.1/clojure-1.5.1.jar from central Compiling 11 source files to /Users/cmueller/workspaceProjectX/storm/storm-netty/target/classes Created /Users/cmueller/workspaceProjectX/storm/storm-netty/target/storm-netty-0.9.0-rc3.jar Wrote /Users/cmueller/workspaceProjectX/storm/storm-netty/pom.xml I will create a WIKI page soon... Best, Christian ----------------- Software Integration Specialist Apache Member V.P. Apache Camel | Apache Camel PMC Member | Apache Camel committer Apache Incubator PMC Member https://www.linkedin.com/pub/christian-mueller/11/551/642 On Fri, Oct 18, 2013 at 12:52 AM, Christian Müller < [email protected]> wrote: > Thanks for taking the time Lasantha! > > I could install ZeroMQ without any issues. > By installing JZMQ, I got the following error: > > cmueller$ git clone https://github.com/nathanmarz/jzmq.git > > Cloning into 'jzmq'... > remote: Counting objects: 611, done. > remote: Compressing objects: 100% (292/292), done. > remote: Total 611 (delta 251), reused 533 (delta 204) > Receiving objects: 100% (611/611), 343.13 KiB | 263.00 KiB/s, done. > Resolving deltas: 100% (251/251), done. > Checking connectivity... done > > cmueller$ cd jzmq > > cmueller$ ./autogen.sh > > autoreconf: Entering directory `.' > autoreconf: configure.in: not using Gettext > autoreconf: running: aclocal -I config --force -I config > aclocal: warning: autoconf input should be named 'configure.ac', not ' > configure.in' > autoreconf: configure.in: tracing > autoreconf: running: glibtoolize --copy --force > glibtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `config'. > glibtoolize: copying file `config/ltmain.sh' > glibtoolize: putting macros in AC_CONFIG_MACRO_DIR, `config'. > glibtoolize: copying file `config/libtool.m4' > glibtoolize: copying file `config/ltoptions.m4' > glibtoolize: copying file `config/ltsugar.m4' > glibtoolize: copying file `config/ltversion.m4' > glibtoolize: copying file `config/lt~obsolete.m4' > aclocal: warning: autoconf input should be named 'configure.ac', not ' > configure.in' > autoreconf: running: /usr/local/Cellar/autoconf/2.69/bin/autoconf > --include=config --force > autoreconf: running: /usr/local/Cellar/autoconf/2.69/bin/autoheader > --include=config --force > autoreconf: running: automake --add-missing --copy --force-missing > automake: warning: autoconf input should be named 'configure.ac', not ' > configure.in' > configure.in:28: installing 'config/compile' > configure.in:28: installing 'config/config.guess' > configure.in:28: installing 'config/config.sub' > configure.in:14: installing 'config/install-sh' > configure.in:14: installing 'config/missing' > Makefile.am: installing './INSTALL' > automake: warning: autoconf input should be named 'configure.ac', not ' > configure.in' > src/Makefile.am: installing 'config/depcomp' > autoreconf: Leaving directory `.' > > cmueller$ ./configure > > checking for a BSD-compatible install... /usr/bin/install -c > checking whether build environment is sane... yes > checking for a thread-safe mkdir -p... config/install-sh -c -d > checking for gawk... no > checking for mawk... no > checking for nawk... no > checking for awk... awk > checking whether make sets $(MAKE)... yes > checking whether make supports nested variables... yes > checking whether UID '501' is supported by ustar format... yes > checking whether GID '20' is supported by ustar format... yes > checking how to create a ustar tar archive... gnutar > checking build system type... x86_64-apple-darwin12.5.0 > checking host system type... x86_64-apple-darwin12.5.0 > checking how to print strings... printf > checking for style of include used by make... GNU > checking for gcc... gcc > checking whether the C compiler works... yes > checking for C compiler default output file name... a.out > checking for suffix of executables... > checking whether we are cross compiling... no > checking for suffix of object files... o > checking whether we are using the GNU C compiler... yes > checking whether gcc accepts -g... yes > checking for gcc option to accept ISO C89... none needed > checking whether gcc understands -c and -o together... yes > checking dependency style of gcc... gcc3 > checking for a sed that does not truncate output... /usr/bin/sed > checking for grep that handles long lines and -e... /usr/bin/grep > checking for egrep... /usr/bin/grep -E > checking for fgrep... /usr/bin/grep -F > checking for ld used by gcc... > /usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld > checking if the linker > (/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) is GNU ld... no > checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm > checking the name lister (/usr/bin/nm) interface... BSD nm > checking whether ln -s works... yes > checking the maximum length of command line arguments... 196608 > checking whether the shell understands some XSI constructs... yes > checking whether the shell understands "+="... yes > checking how to convert x86_64-apple-darwin12.5.0 file names to > x86_64-apple-darwin12.5.0 format... func_convert_file_noop > checking how to convert x86_64-apple-darwin12.5.0 file names to toolchain > format... func_convert_file_noop > checking for /usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld > option to reload object files... -r > checking for objdump... no > checking how to recognize dependent libraries... pass_all > checking for dlltool... no > checking how to associate runtime and link libraries... printf %s\n > checking for ar... ar > checking for archiver @FILE support... no > checking for strip... strip > checking for ranlib... ranlib > checking command to parse /usr/bin/nm output from gcc object... ok > checking for sysroot... no > checking for mt... no > checking if : is a manifest tool... no > checking for dsymutil... dsymutil > checking for nmedit... nmedit > checking for lipo... lipo > checking for otool... otool > checking for otool64... no > checking for -single_module linker flag... yes > checking for -exported_symbols_list linker flag... yes > checking for -force_load linker flag... yes > checking how to run the C preprocessor... gcc -E > checking for ANSI C header files... yes > checking for sys/types.h... yes > checking for sys/stat.h... yes > checking for stdlib.h... yes > checking for string.h... yes > checking for memory.h... yes > checking for strings.h... yes > checking for inttypes.h... yes > checking for stdint.h... yes > checking for unistd.h... yes > checking for dlfcn.h... yes > checking for objdir... .libs > checking if gcc supports -fno-rtti -fno-exceptions... no > checking for gcc option to produce PIC... -fno-common -DPIC > checking if gcc PIC flag -fno-common -DPIC works... yes > checking if gcc static flag -static works... no > checking if gcc supports -c -o file.o... yes > checking if gcc supports -c -o file.o... (cached) yes > checking whether the gcc linker > (/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) supports > shared libraries... yes > checking dynamic linker characteristics... darwin12.5.0 dyld > checking how to hardcode library paths into programs... immediate > checking whether stripping libraries is possible... yes > checking if libtool supports shared libraries... yes > checking whether to build shared libraries... yes > checking whether to build static libraries... yes > checking for gawk... (cached) awk > checking for g++... g++ > checking whether we are using the GNU C++ compiler... yes > checking whether g++ accepts -g... yes > checking dependency style of g++... gcc3 > checking how to run the C++ preprocessor... g++ -E > checking for ld used by g++... > /usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld > checking if the linker > (/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) is GNU ld... no > checking whether the g++ linker > (/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) supports > shared libraries... yes > checking for g++ option to produce PIC... -fno-common -DPIC > checking if g++ PIC flag -fno-common -DPIC works... yes > checking if g++ static flag -static works... no > checking if g++ supports -c -o file.o... yes > checking if g++ supports -c -o file.o... (cached) yes > checking whether the g++ linker > (/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) supports > shared libraries... yes > checking dynamic linker characteristics... darwin12.5.0 dyld > checking how to hardcode library paths into programs... immediate > checking for pkg-config... /usr/local/bin/pkg-config > checking pkg-config is at least version 0.9.0... yes > checking for ZeroMQ... yes > checking zmq.h usability... yes > checking zmq.h presence... yes > checking for zmq.h... yes > checking for zmq_init in -lzmq... yes > checking for javac... /usr/bin/javac > checking for javah... /usr/bin/javah > checking for jar... /usr/bin/jar > checking for jni.h in > /Library/Java/JavaVirtualMachines/1.6.0_43-b01-447.jdk/Contents/Home/include... > yes > checking that generated files are newer than configure... done > configure: creating ./config.status > config.status: creating Makefile > config.status: creating src/Makefile > config.status: creating perf/Makefile > config.status: creating src/config.hpp > config.status: executing depfiles commands > config.status: executing libtool commands > > cmueller$ make > > Making all in src > make[1]: *** No rule to make target `classdist_noinst.stamp', needed by > `org/zeromq/ZMQ.class'. Stop. > make: *** [all-recursive] Error 1 > > Any idea what's wrong? > > Thanks in advance, > > Christian > ----------------- > > Software Integration Specialist > > Apache Member > V.P. Apache Camel | Apache Camel PMC Member | Apache Camel committer > Apache Incubator PMC Member > > https://www.linkedin.com/pub/christian-mueller/11/551/642 > > > On Mon, Oct 14, 2013 at 2:42 PM, Lasantha Fernando <[email protected] > > wrote: > >> Hi Christian, >> >> Were you able to fix this error? Did you stumble upon [1] when searching >> for this error? It has some useful links at the bottom regarding building >> on Mac OS X. >> >> [1] >> https://github.com/nathanmarz/storm/wiki/Installing-native-dependencies >> >> HTH, >> Lasantha >> >> >> On Thu, Oct 10, 2013 at 8:38 PM, Christian Müller < >> [email protected]> wrote: >> >> > Hello fellow Storm developers! >> > >> > Congrats for this great product! >> > >> > I really like the idea behind this project and cannot wait diving into >> it >> > to contribute to this project. We plan to use this framework in an >> > environment which has to follow the PCI security standards [1]. Because >> of >> > this (and to start working/playing with the source), I plan to start my >> > contributions with some third party library updates. This is important >> for >> > us, because we are not allowed to use unsupported third party libraries. >> > >> > Because I had some trouble building Storm (I still not succeed), I would >> > like to start my first contribution with a WIKI page about this topic. >> > Something similar we also have for Apache Camel [2]. But first I have to >> > succeed with this step.. >> > >> > What I have done so far: >> > I'm using brew and updated it to the latest version. >> > cmueller$ brew --config >> > HOMEBREW_VERSION: 0.9.5 >> > ORIGIN: https://github.com/mxcl/homebrew >> > HEAD: 89b2d0878c61c1cedccc134e65f0daa6c81edbba >> > HOMEBREW_PREFIX: /usr/local >> > HOMEBREW_CELLAR: /usr/local/Cellar >> > CPU: 8-core 64-bit ivybridge >> > OS X: 10.8.5-x86_64 >> > Xcode: 5.0 >> > CLT: 4.6.0.0.1.1362189000 >> > LLVM-GCC: build 2336 >> > Clang: 4.2 build 425 >> > X11: 2.7.4 => /opt/X11 >> > System Ruby: 1.8.7-358 >> > Perl: /usr/bin/perl >> > Python: /usr/bin/python >> > Ruby: /Users/cmueller/.rvm/rubies/ruby-2.0.0-p247/bin/ruby >> > >> > I installed leiningen: >> > cmueller$ brew install leiningen >> > ==> Downloading >> > https://github.com/technomancy/leiningen/archive/2.3.2.tar.gz >> > Already downloaded: /Library/Caches/Homebrew/leiningen-2.3.2.tar.gz >> > ==> Downloading >> > >> https://leiningen.s3.amazonaws.com/downloads/leiningen-2.3.2-standalone.jar >> > Already downloaded: /Library/Caches/Homebrew/leiningen--jar-2.3.2.jar >> > ==> Caveats >> > Dependencies will be installed to: >> > $HOME/.m2/repository >> > To play around with Clojure run `lein repl` or `lein help`. >> > >> > Bash completion has been installed to: >> > /usr/local/etc/bash_completion.d >> > >> > zsh completion has been installed to: >> > /usr/local/share/zsh/site-functions >> > ==> Summary >> > 🍺 /usr/local/Cellar/leiningen/2.3.2: 8 files, 13M, built in 2 seconds >> > >> > I cloned the Storm Git repo: >> > git clone https://github.com/nathanmarz/storm.git >> > Cloning into 'storm'... >> > remote: Counting objects: 20315, done. >> > remote: Compressing objects: 100% (5717/5717), done. >> > remote: Total 20315 (delta 12845), reused 19470 (delta 12136) >> > Receiving objects: 100% (20315/20315), 4.37 MiB | 704.00 KiB/s, done. >> > Resolving deltas: 100% (12845/12845), done. >> > Checking connectivity... done >> > >> > I changed the directory and executed the install_zmq.sh script as >> described >> > here [3]: >> > cmueller$ cd storm >> > cmueller$ bash ./bin/install_zmq.sh >> > ./bin/install_zmq.sh: line 2: JAVA_HOME: /usr/libexec/java_home: syntax >> > error: operand expected (error token is "/usr/libexec/java_home") >> > --2013-10-10 16:06:18-- http://download.zeromq.org/zeromq-2.1.7.tar.gz >> > Resolving download.zeromq.org... 95.142.169.98 >> > Connecting to download.zeromq.org|95.142.169.98|:80... connected. >> > HTTP request sent, awaiting response... 200 OK >> > Length: 1877380 (1.8M) [application/x-gzip] >> > Saving to: ‘zeromq-2.1.7.tar.gz’ >> > >> > >> > >> 100%[====================================================================================================================================================>] >> > 1,877,380 643KB/s in 2.9s >> > >> > 2013-10-10 16:06:21 (643 KB/s) - ‘zeromq-2.1.7.tar.gz’ saved >> > [1877380/1877380] >> > >> > checking for a BSD-compatible install... /usr/bin/install -c >> > checking whether build environment is sane... yes >> > checking for a thread-safe mkdir -p... config/install-sh -c -d >> > checking for gawk... no >> > checking for mawk... no >> > checking for nawk... no >> > checking for awk... awk >> > checking whether make sets $(MAKE)... yes >> > checking how to create a ustar tar archive... gnutar >> > checking for gcc... gcc >> > checking whether the C compiler works... yes >> > checking for C compiler default output file name... a.out >> > checking for suffix of executables... >> > checking whether we are cross compiling... no >> > checking for suffix of object files... o >> > checking whether we are using the GNU C compiler... yes >> > checking whether gcc accepts -g... yes >> > checking for gcc option to accept ISO C89... none needed >> > checking for style of include used by make... GNU >> > checking dependency style of gcc... gcc3 >> > checking for gcc option to accept ISO C99... -std=gnu99 >> > checking for g++... g++ >> > checking whether we are using the GNU C++ compiler... yes >> > checking whether g++ accepts -g... yes >> > checking dependency style of g++... gcc3 >> > checking whether gcc -std=gnu99 and cc understand -c and -o together... >> yes >> > checking for a sed that does not truncate output... /usr/bin/sed >> > checking for gawk... (cached) awk >> > checking for xmlto... no >> > checking for asciidoc... no >> > checking build system type... x86_64-apple-darwin12.5.0 >> > checking host system type... x86_64-apple-darwin12.5.0 >> > checking for a sed that does not truncate output... (cached) >> /usr/bin/sed >> > checking for grep that handles long lines and -e... /usr/bin/grep >> > checking for egrep... /usr/bin/grep -E >> > checking for fgrep... /usr/bin/grep -F >> > checking for ld used by gcc -std=gnu99... >> > /usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld >> > checking if the linker >> > (/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) is GNU >> ld... >> > no >> > checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm >> > checking the name lister (/usr/bin/nm) interface... BSD nm >> > checking whether ln -s works... yes >> > checking the maximum length of command line arguments... 196608 >> > checking whether the shell understands some XSI constructs... yes >> > checking whether the shell understands "+="... yes >> > checking for /usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld >> > option to reload object files... -r >> > checking for objdump... objdump >> > checking how to recognize dependent libraries... pass_all >> > checking for ar... ar >> > checking for strip... strip >> > checking for ranlib... ranlib >> > checking command to parse /usr/bin/nm output from gcc -std=gnu99 >> object... >> > ok >> > checking for dsymutil... dsymutil >> > checking for nmedit... nmedit >> > checking for lipo... lipo >> > checking for otool... otool >> > checking for otool64... no >> > checking for -single_module linker flag... yes >> > checking for -exported_symbols_list linker flag... yes >> > checking how to run the C preprocessor... gcc -std=gnu99 -E >> > checking for ANSI C header files... yes >> > checking for sys/types.h... yes >> > checking for sys/stat.h... yes >> > checking for stdlib.h... yes >> > checking for string.h... yes >> > checking for memory.h... yes >> > checking for strings.h... yes >> > checking for inttypes.h... yes >> > checking for stdint.h... yes >> > checking for unistd.h... yes >> > checking for dlfcn.h... yes >> > checking whether we are using the GNU C++ compiler... (cached) yes >> > checking whether g++ accepts -g... (cached) yes >> > checking dependency style of g++... (cached) gcc3 >> > checking how to run the C++ preprocessor... g++ -E >> > checking for objdir... .libs >> > checking if gcc -std=gnu99 supports -fno-rtti -fno-exceptions... no >> > checking for gcc -std=gnu99 option to produce PIC... -fno-common -DPIC >> > checking if gcc -std=gnu99 PIC flag -fno-common -DPIC works... yes >> > checking if gcc -std=gnu99 static flag -static works... no >> > checking if gcc -std=gnu99 supports -c -o file.o... yes >> > checking if gcc -std=gnu99 supports -c -o file.o... (cached) yes >> > checking whether the gcc -std=gnu99 linker >> > (/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) supports >> > shared libraries... yes >> > checking dynamic linker characteristics... darwin12.5.0 dyld >> > checking how to hardcode library paths into programs... immediate >> > checking whether stripping libraries is possible... yes >> > checking if libtool supports shared libraries... yes >> > checking whether to build shared libraries... yes >> > checking whether to build static libraries... yes >> > checking for ld used by g++... >> > /usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld >> > checking if the linker >> > (/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) is GNU >> ld... >> > no >> > checking whether the g++ linker >> > (/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) supports >> > shared libraries... yes >> > checking for g++ option to produce PIC... -fno-common -DPIC >> > checking if g++ PIC flag -fno-common -DPIC works... yes >> > checking if g++ static flag -static works... no >> > checking if g++ supports -c -o file.o... yes >> > checking if g++ supports -c -o file.o... (cached) yes >> > checking whether the g++ linker >> > (/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) supports >> > shared libraries... yes >> > checking dynamic linker characteristics... darwin12.5.0 dyld >> > checking how to hardcode library paths into programs... immediate >> > checking whether the C compiler works... yes >> > checking whether we are using Intel C compiler... no >> > checking whether we are using Sun Studio C compiler... no >> > checking whether we are using clang C compiler... no >> > checking whether we are using gcc >= 4 C compiler... yes >> > checking whether the C++ compiler works... yes >> > checking whether we are using Intel C++ compiler... no >> > checking whether we are using Sun Studio C++ compiler... no >> > checking whether we are using clang C++ compiler... no >> > checking whether we are using gcc >= 4 C++ compiler... yes >> > checking whether to enable debugging information... no >> > checking whether to enable code coverage... no >> > checking for pthread_create in -lpthread... yes >> > checking whether C++ compiler supports -Wno-uninitialized... yes >> > checking whether C++ compiler supports -fvisibility=hidden... yes >> > checking whether C++ compiler supports dso visibility... yes >> > checking for asciidoc... no >> > checking for xmlto... no >> > checking whether to build documentation... no >> > checking whether to install manpages... yes >> > checking for ANSI C header files... (cached) yes >> > checking errno.h usability... yes >> > checking errno.h presence... yes >> > checking for errno.h... yes >> > checking arpa/inet.h usability... yes >> > checking arpa/inet.h presence... yes >> > checking for arpa/inet.h... yes >> > checking netinet/tcp.h usability... yes >> > checking netinet/tcp.h presence... yes >> > checking for netinet/tcp.h... yes >> > checking netinet/in.h usability... yes >> > checking netinet/in.h presence... yes >> > checking for netinet/in.h... yes >> > checking stddef.h usability... yes >> > checking stddef.h presence... yes >> > checking for stddef.h... yes >> > checking for stdlib.h... (cached) yes >> > checking for string.h... (cached) yes >> > checking sys/socket.h usability... yes >> > checking sys/socket.h presence... yes >> > checking for sys/socket.h... yes >> > checking sys/time.h usability... yes >> > checking sys/time.h presence... yes >> > checking for sys/time.h... yes >> > checking for unistd.h... (cached) yes >> > checking limits.h usability... yes >> > checking limits.h presence... yes >> > checking for limits.h... yes >> > checking ifaddrs.h usability... yes >> > checking ifaddrs.h presence... yes >> > checking for ifaddrs.h... yes >> > checking for stdbool.h that conforms to C99... yes >> > checking for _Bool... no >> > checking for an ANSI C-conforming const... yes >> > checking for inline... inline >> > checking for size_t... yes >> > checking for ssize_t... yes >> > checking whether time.h and sys/time.h may both be included... yes >> > checking for uint32_t... yes >> > checking for working volatile... yes >> > checking how to enable additional warnings for C++ compiler... -Wall >> > checking return type of signal handlers... void >> > checking for perror... yes >> > checking for gettimeofday... yes >> > checking for memset... yes >> > checking for socket... yes >> > checking for getifaddrs... yes >> > checking for freeifaddrs... yes >> > checking alloca.h usability... yes >> > checking alloca.h presence... yes >> > checking for alloca.h... yes >> > configure: creating ./config.status >> > config.status: creating Makefile >> > config.status: creating src/Makefile >> > config.status: creating doc/Makefile >> > config.status: creating perf/Makefile >> > config.status: creating src/libzmq.pc >> > config.status: creating builds/msvc/Makefile >> > config.status: creating tests/Makefile >> > config.status: creating foreign/openpgm/Makefile >> > config.status: creating builds/redhat/zeromq.spec >> > config.status: creating src/platform.hpp >> > config.status: executing depfiles commands >> > config.status: executing libtool commands >> > Making all in src >> > make all-am >> > CXX libzmq_la-clock.lo >> > CXX libzmq_la-command.lo >> > CXX libzmq_la-ctx.lo >> > CXX libzmq_la-connect_session.lo >> > CXX libzmq_la-decoder.lo >> > CXX libzmq_la-device.lo >> > CXX libzmq_la-devpoll.lo >> > CXX libzmq_la-dist.lo >> > CXX libzmq_la-encoder.lo >> > CXX libzmq_la-epoll.lo >> > CXX libzmq_la-err.lo >> > CXX libzmq_la-fq.lo >> > CXX libzmq_la-io_object.lo >> > CXX libzmq_la-io_thread.lo >> > CXX libzmq_la-ip.lo >> > CXX libzmq_la-kqueue.lo >> > CXX libzmq_la-lb.lo >> > CXX libzmq_la-mailbox.lo >> > CXX libzmq_la-named_session.lo >> > CXX libzmq_la-object.lo >> > CXX libzmq_la-options.lo >> > CXX libzmq_la-own.lo >> > CXX libzmq_la-pair.lo >> > CXX libzmq_la-pgm_receiver.lo >> > CXX libzmq_la-pgm_sender.lo >> > CXX libzmq_la-pgm_socket.lo >> > CXX libzmq_la-pipe.lo >> > CXX libzmq_la-poll.lo >> > CXX libzmq_la-poller_base.lo >> > CXX libzmq_la-pull.lo >> > CXX libzmq_la-push.lo >> > CXX libzmq_la-reaper.lo >> > CXX libzmq_la-pub.lo >> > CXX libzmq_la-rep.lo >> > CXX libzmq_la-req.lo >> > CXX libzmq_la-select.lo >> > CXX libzmq_la-session.lo >> > CXX libzmq_la-socket_base.lo >> > CXX libzmq_la-sub.lo >> > CXX libzmq_la-swap.lo >> > CXX libzmq_la-tcp_connecter.lo >> > CXX libzmq_la-tcp_listener.lo >> > CXX libzmq_la-tcp_socket.lo >> > CXX libzmq_la-thread.lo >> > CXX libzmq_la-transient_session.lo >> > CXX libzmq_la-trie.lo >> > CXX libzmq_la-uuid.lo >> > CXX libzmq_la-xpub.lo >> > CXX libzmq_la-xrep.lo >> > CXX libzmq_la-xreq.lo >> > CXX libzmq_la-xsub.lo >> > CXX libzmq_la-zmq.lo >> > CXX libzmq_la-zmq_connecter.lo >> > CXX libzmq_la-zmq_engine.lo >> > CXX libzmq_la-zmq_init.lo >> > CXX libzmq_la-zmq_listener.lo >> > CXXLD libzmq.la >> > /usr/bin/ranlib: file: .libs/libzmq.a(libzmq_la-devpoll.o) has no >> symbols >> > /usr/bin/ranlib: file: .libs/libzmq.a(libzmq_la-epoll.o) has no symbols >> > /usr/bin/ranlib: file: .libs/libzmq.a(libzmq_la-pgm_receiver.o) has no >> > symbols >> > /usr/bin/ranlib: file: .libs/libzmq.a(libzmq_la-pgm_sender.o) has no >> > symbols >> > /usr/bin/ranlib: file: .libs/libzmq.a(libzmq_la-pgm_socket.o) has no >> > symbols >> > ranlib: file: .libs/libzmq.a(libzmq_la-devpoll.o) has no symbols >> > ranlib: file: .libs/libzmq.a(libzmq_la-epoll.o) has no symbols >> > ranlib: file: .libs/libzmq.a(libzmq_la-pgm_receiver.o) has no symbols >> > ranlib: file: .libs/libzmq.a(libzmq_la-pgm_sender.o) has no symbols >> > ranlib: file: .libs/libzmq.a(libzmq_la-pgm_socket.o) has no symbols >> > Making all in doc >> > make[1]: Nothing to be done for `all'. >> > Making all in perf >> > CXX local_lat.o >> > CXXLD local_lat >> > CXX remote_lat.o >> > CXXLD remote_lat >> > CXX local_thr.o >> > CXXLD local_thr >> > CXX remote_thr.o >> > CXXLD remote_thr >> > CXX inproc_lat.o >> > CXXLD inproc_lat >> > CXX inproc_thr.o >> > CXXLD inproc_thr >> > Making all in tests >> > CXX test_pair_inproc.o >> > CXXLD test_pair_inproc >> > CXX test_pair_tcp.o >> > CXXLD test_pair_tcp >> > CXX test_reqrep_inproc.o >> > CXXLD test_reqrep_inproc >> > CXX test_reqrep_tcp.o >> > CXXLD test_reqrep_tcp >> > CXX test_hwm.o >> > CXXLD test_hwm >> > CXX test_shutdown_stress.o >> > CXXLD test_shutdown_stress >> > CXX test_pair_ipc.o >> > CXXLD test_pair_ipc >> > CXX test_reqrep_ipc.o >> > CXXLD test_reqrep_ipc >> > make[1]: Nothing to be done for `all-am'. >> > Password: >> > Making install in src >> > test -z "/usr/local/lib" || ../config/install-sh -c -d "/usr/local/lib" >> > /bin/sh ../libtool --mode=install /usr/bin/install -c >> > libzmq.la'/usr/local/lib' >> > libtool: install: /usr/bin/install -c .libs/libzmq.1.dylib >> > /usr/local/lib/libzmq.1.dylib >> > libtool: install: (cd /usr/local/lib && { ln -s -f libzmq.1.dylib >> > libzmq.dylib || { rm -f libzmq.dylib && ln -s libzmq.1.dylib >> libzmq.dylib; >> > }; }) >> > libtool: install: /usr/bin/install -c .libs/libzmq.lai /usr/local/lib/ >> > libzmq.la >> > libtool: install: /usr/bin/install -c .libs/libzmq.a >> > /usr/local/lib/libzmq.a >> > libtool: install: chmod 644 /usr/local/lib/libzmq.a >> > libtool: install: ranlib /usr/local/lib/libzmq.a >> > ranlib: file: /usr/local/lib/libzmq.a(libzmq_la-devpoll.o) has no >> symbols >> > ranlib: file: /usr/local/lib/libzmq.a(libzmq_la-epoll.o) has no symbols >> > ranlib: file: /usr/local/lib/libzmq.a(libzmq_la-pgm_receiver.o) has no >> > symbols >> > ranlib: file: /usr/local/lib/libzmq.a(libzmq_la-pgm_sender.o) has no >> > symbols >> > ranlib: file: /usr/local/lib/libzmq.a(libzmq_la-pgm_socket.o) has no >> > symbols >> > ---------------------------------------------------------------------- >> > Libraries have been installed in: >> > /usr/local/lib >> > >> > If you ever happen to want to link against installed libraries >> > in a given directory, LIBDIR, you must either use libtool, and >> > specify the full pathname of the library, or use the `-LLIBDIR' >> > flag during linking and do at least one of the following: >> > - add LIBDIR to the `DYLD_LIBRARY_PATH' environment variable >> > during execution >> > >> > See any operating system documentation about shared libraries for >> > more information, such as the ld(1) and ld.so(8) manual pages. >> > ---------------------------------------------------------------------- >> > test -z "/usr/local/include" || ../config/install-sh -c -d >> > "/usr/local/include" >> > /usr/bin/install -c -m 644 ../include/zmq.h ../include/zmq.hpp >> > ../include/zmq_utils.h '/usr/local/include' >> > test -z "/usr/local/lib/pkgconfig" || ../config/install-sh -c -d >> > "/usr/local/lib/pkgconfig" >> > /usr/bin/install -c -m 644 libzmq.pc '/usr/local/lib/pkgconfig' >> > Making install in doc >> > make[2]: Nothing to be done for `install-exec-am'. >> > test -z "/usr/local/share/man/man3" || ../config/install-sh -c -d >> > "/usr/local/share/man/man3" >> > /usr/bin/install -c -m 644 zmq_bind.3 zmq_close.3 zmq_connect.3 >> > zmq_device.3 zmq_init.3 zmq_msg_close.3 zmq_msg_copy.3 zmq_msg_data.3 >> > zmq_msg_init.3 zmq_msg_init_data.3 zmq_msg_init_size.3 zmq_msg_move.3 >> > zmq_msg_size.3 zmq_poll.3 zmq_recv.3 zmq_send.3 zmq_setsockopt.3 >> > zmq_socket.3 zmq_strerror.3 zmq_term.3 zmq_version.3 zmq_getsockopt.3 >> > zmq_errno.3 '/usr/local/share/man/man3' >> > test -z "/usr/local/share/man/man7" || ../config/install-sh -c -d >> > "/usr/local/share/man/man7" >> > /usr/bin/install -c -m 644 zmq.7 zmq_tcp.7 zmq_pgm.7 zmq_epgm.7 >> > zmq_inproc.7 zmq_ipc.7 zmq_cpp.7 '/usr/local/share/man/man7' >> > Making install in perf >> > make[2]: Nothing to be done for `install-exec-am'. >> > make[2]: Nothing to be done for `install-data-am'. >> > Making install in tests >> > make[2]: Nothing to be done for `install-exec-am'. >> > make[2]: Nothing to be done for `install-data-am'. >> > make[2]: Nothing to be done for `install-exec-am'. >> > make[2]: Nothing to be done for `install-data-am'. >> > Cloning into 'jzmq'... >> > remote: Counting objects: 611, done. >> > remote: Compressing objects: 100% (291/291), done. >> > remote: Total 611 (delta 246), reused 539 (delta 205) >> > Receiving objects: 100% (611/611), 345.23 KiB | 479.00 KiB/s, done. >> > Resolving deltas: 100% (246/246), done. >> > Checking connectivity... done >> > autoreconf: Entering directory `.' >> > autoreconf: configure.in: not using Gettext >> > autoreconf: running: aclocal -I config --force -I config >> > aclocal: warning: autoconf input should be named 'configure.ac', not ' >> > configure.in' >> > autoreconf: configure.in: tracing >> > autoreconf: running: glibtoolize --copy --force >> > glibtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `config'. >> > glibtoolize: copying file `config/ltmain.sh' >> > glibtoolize: putting macros in AC_CONFIG_MACRO_DIR, `config'. >> > glibtoolize: copying file `config/libtool.m4' >> > glibtoolize: copying file `config/ltoptions.m4' >> > glibtoolize: copying file `config/ltsugar.m4' >> > glibtoolize: copying file `config/ltversion.m4' >> > glibtoolize: copying file `config/lt~obsolete.m4' >> > aclocal: warning: autoconf input should be named 'configure.ac', not ' >> > configure.in' >> > autoreconf: running: /usr/local/Cellar/autoconf/2.69/bin/autoconf >> > --include=config --force >> > autoreconf: running: /usr/local/Cellar/autoconf/2.69/bin/autoheader >> > --include=config --force >> > autoreconf: running: automake --add-missing --copy --force-missing >> > automake: warning: autoconf input should be named 'configure.ac', not ' >> > configure.in' >> > configure.in:28: installing 'config/compile' >> > configure.in:28: installing 'config/config.guess' >> > configure.in:28: installing 'config/config.sub' >> > configure.in:14: installing 'config/install-sh' >> > configure.in:14: installing 'config/missing' >> > Makefile.am: installing './INSTALL' >> > automake: warning: autoconf input should be named 'configure.ac', not ' >> > configure.in' >> > src/Makefile.am: installing 'config/depcomp' >> > autoreconf: Leaving directory `.' >> > checking for a BSD-compatible install... /usr/bin/install -c >> > checking whether build environment is sane... yes >> > checking for a thread-safe mkdir -p... config/install-sh -c -d >> > checking for gawk... no >> > checking for mawk... no >> > checking for nawk... no >> > checking for awk... awk >> > checking whether make sets $(MAKE)... yes >> > checking whether make supports nested variables... yes >> > checking whether UID '501' is supported by ustar format... yes >> > checking whether GID '20' is supported by ustar format... yes >> > checking how to create a ustar tar archive... gnutar >> > checking build system type... x86_64-apple-darwin12.5.0 >> > checking host system type... x86_64-apple-darwin12.5.0 >> > checking how to print strings... printf >> > checking for style of include used by make... GNU >> > checking for gcc... gcc >> > checking whether the C compiler works... yes >> > checking for C compiler default output file name... a.out >> > checking for suffix of executables... >> > checking whether we are cross compiling... no >> > checking for suffix of object files... o >> > checking whether we are using the GNU C compiler... yes >> > checking whether gcc accepts -g... yes >> > checking for gcc option to accept ISO C89... none needed >> > checking whether gcc understands -c and -o together... yes >> > checking dependency style of gcc... gcc3 >> > checking for a sed that does not truncate output... /usr/bin/sed >> > checking for grep that handles long lines and -e... /usr/bin/grep >> > checking for egrep... /usr/bin/grep -E >> > checking for fgrep... /usr/bin/grep -F >> > checking for ld used by gcc... >> > /usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld >> > checking if the linker >> > (/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) is GNU >> ld... >> > no >> > checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm >> > checking the name lister (/usr/bin/nm) interface... BSD nm >> > checking whether ln -s works... yes >> > checking the maximum length of command line arguments... 196608 >> > checking whether the shell understands some XSI constructs... yes >> > checking whether the shell understands "+="... yes >> > checking how to convert x86_64-apple-darwin12.5.0 file names to >> > x86_64-apple-darwin12.5.0 format... func_convert_file_noop >> > checking how to convert x86_64-apple-darwin12.5.0 file names to >> toolchain >> > format... func_convert_file_noop >> > checking for /usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld >> > option to reload object files... -r >> > checking for objdump... no >> > checking how to recognize dependent libraries... pass_all >> > checking for dlltool... no >> > checking how to associate runtime and link libraries... printf %s\n >> > checking for ar... ar >> > checking for archiver @FILE support... no >> > checking for strip... strip >> > checking for ranlib... ranlib >> > checking command to parse /usr/bin/nm output from gcc object... ok >> > checking for sysroot... no >> > checking for mt... no >> > checking if : is a manifest tool... no >> > checking for dsymutil... dsymutil >> > checking for nmedit... nmedit >> > checking for lipo... lipo >> > checking for otool... otool >> > checking for otool64... no >> > checking for -single_module linker flag... yes >> > checking for -exported_symbols_list linker flag... yes >> > checking for -force_load linker flag... yes >> > checking how to run the C preprocessor... gcc -E >> > checking for ANSI C header files... yes >> > checking for sys/types.h... yes >> > checking for sys/stat.h... yes >> > checking for stdlib.h... yes >> > checking for string.h... yes >> > checking for memory.h... yes >> > checking for strings.h... yes >> > checking for inttypes.h... yes >> > checking for stdint.h... yes >> > checking for unistd.h... yes >> > checking for dlfcn.h... yes >> > checking for objdir... .libs >> > checking if gcc supports -fno-rtti -fno-exceptions... no >> > checking for gcc option to produce PIC... -fno-common -DPIC >> > checking if gcc PIC flag -fno-common -DPIC works... yes >> > checking if gcc static flag -static works... no >> > checking if gcc supports -c -o file.o... yes >> > checking if gcc supports -c -o file.o... (cached) yes >> > checking whether the gcc linker >> > (/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) supports >> > shared libraries... yes >> > checking dynamic linker characteristics... darwin12.5.0 dyld >> > checking how to hardcode library paths into programs... immediate >> > checking whether stripping libraries is possible... yes >> > checking if libtool supports shared libraries... yes >> > checking whether to build shared libraries... yes >> > checking whether to build static libraries... yes >> > checking for gawk... (cached) awk >> > checking for g++... g++ >> > checking whether we are using the GNU C++ compiler... yes >> > checking whether g++ accepts -g... yes >> > checking dependency style of g++... gcc3 >> > checking how to run the C++ preprocessor... g++ -E >> > checking for ld used by g++... >> > /usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld >> > checking if the linker >> > (/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) is GNU >> ld... >> > no >> > checking whether the g++ linker >> > (/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) supports >> > shared libraries... yes >> > checking for g++ option to produce PIC... -fno-common -DPIC >> > checking if g++ PIC flag -fno-common -DPIC works... yes >> > checking if g++ static flag -static works... no >> > checking if g++ supports -c -o file.o... yes >> > checking if g++ supports -c -o file.o... (cached) yes >> > checking whether the g++ linker >> > (/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) supports >> > shared libraries... yes >> > checking dynamic linker characteristics... darwin12.5.0 dyld >> > checking how to hardcode library paths into programs... immediate >> > checking for pkg-config... /usr/local/bin/pkg-config >> > checking pkg-config is at least version 0.9.0... yes >> > checking for ZeroMQ... yes >> > checking zmq.h usability... yes >> > checking zmq.h presence... yes >> > checking for zmq.h... yes >> > checking for zmq_init in -lzmq... yes >> > checking for javac... /usr/bin/javac >> > checking for javah... /usr/bin/javah >> > checking for jar... /usr/bin/jar >> > checking for jni.h in >> > >> > >> /Library/Java/JavaVirtualMachines/1.6.0_43-b01-447.jdk/Contents/Home/include... >> > yes >> > checking that generated files are newer than configure... done >> > configure: creating ./config.status >> > config.status: creating Makefile >> > config.status: creating src/Makefile >> > config.status: creating perf/Makefile >> > config.status: creating src/config.hpp >> > config.status: executing depfiles commands >> > config.status: executing libtool commands >> > Making all in src >> > make[1]: *** No rule to make target `classdist_noinst.stamp', needed by >> > `org/zeromq/ZMQ.class'. Stop. >> > make: *** [all-recursive] Error 1 >> > Making install in src >> > make[1]: *** No rule to make target `classdist_noinst.stamp', needed by >> > `org/zeromq/ZMQ.class'. Stop. >> > make: *** [install-recursive] Error 1 >> > >> > Althought I got the error, I tryied to follow up with the next step: >> > cmueller$ lein sub install >> > Reading project from storm-console-logging >> > Created >> > >> > >> /Users/cmueller/workspaceProjectX/storm/storm-console-logging/target/storm-console-logging-0.9.0-rc3.jar >> > Wrote >> /Users/cmueller/workspaceProjectX/storm/storm-console-logging/pom.xml >> > Reading project from storm-core >> > Compiling 438 source files to >> > /Users/cmueller/workspaceProjectX/storm/storm-core/target/classes >> > Note: >> > >> > >> /Users/cmueller/workspaceProjectX/storm/storm-core/src/jvm/backtype/storm/coordination/CoordinatedBolt.java >> > uses or overrides a deprecated API. >> > Note: Recompile with -Xlint:deprecation for details. >> > Note: Some input files use unchecked or unsafe operations. >> > Note: Recompile with -Xlint:unchecked for details. >> > Compiling backtype.storm.bootstrap >> > Compiling backtype.storm.clojure >> > Compiling backtype.storm.cluster >> > Compiling backtype.storm.command.activate >> > Compiling backtype.storm.command.config-value >> > Compiling backtype.storm.command.deactivate >> > Compiling backtype.storm.command.dev-zookeeper >> > Compiling backtype.storm.command.kill-topology >> > Compiling backtype.storm.command.list >> > Compiling backtype.storm.command.rebalance >> > Compiling backtype.storm.command.shell-submission >> > Compiling backtype.storm.config >> > Compiling backtype.storm.daemon.acker >> > Compiling backtype.storm.daemon.builtin-metrics >> > Compiling backtype.storm.daemon.common >> > Compiling backtype.storm.daemon.drpc >> > Compiling backtype.storm.daemon.executor >> > Compiling backtype.storm.daemon.logviewer >> > Compiling backtype.storm.daemon.nimbus >> > Compiling backtype.storm.daemon.supervisor >> > Compiling backtype.storm.daemon.task >> > Compiling backtype.storm.daemon.worker >> > Compiling backtype.storm.disruptor >> > Compiling backtype.storm.event >> > Compiling backtype.storm.LocalCluster >> > Compiling backtype.storm.LocalDRPC >> > Compiling backtype.storm.log >> > Compiling backtype.storm.messaging.loader >> > Compiling backtype.storm.messaging.local >> > Compiling backtype.storm.messaging.zmq >> > 6789 [main] ERROR org.apache.zookeeper.server.NIOServerCnxn - Thread >> > Thread[main,5,main] died >> > clojure.lang.Compiler$CompilerException: >> java.lang.UnsatisfiedLinkError: no >> > jzmq in java.library.path, compiling:(zmq.clj:1) >> > at clojure.lang.Compiler$InvokeExpr.eval(Compiler.java:3387) >> > ~[clojure-1.4.0.jar:na] >> > at clojure.lang.Compiler.compile1(Compiler.java:7035) >> > ~[clojure-1.4.0.jar:na] >> > at clojure.lang.Compiler.compile1(Compiler.java:7025) >> > ~[clojure-1.4.0.jar:na] >> > at clojure.lang.Compiler.compile(Compiler.java:7097) >> > ~[clojure-1.4.0.jar:na] >> > at clojure.lang.RT.compile(RT.java:387) ~[clojure-1.4.0.jar:na] >> > at clojure.lang.RT.load(RT.java:427) ~[clojure-1.4.0.jar:na] >> > at clojure.lang.RT.load(RT.java:400) ~[clojure-1.4.0.jar:na] >> > at clojure.core$load$fn__4890.invoke(core.clj:5415) >> > ~[clojure-1.4.0.jar:na] >> > at clojure.core$load.doInvoke(core.clj:5414) ~[clojure-1.4.0.jar:na] >> > at clojure.lang.RestFn.invoke(RestFn.java:408) >> ~[clojure-1.4.0.jar:na] >> > at clojure.core$load_one.invoke(core.clj:5227) >> ~[clojure-1.4.0.jar:na] >> > at clojure.core$compile$fn__4895.invoke(core.clj:5426) >> > ~[clojure-1.4.0.jar:na] >> > at clojure.core$compile.invoke(core.clj:5425) >> ~[clojure-1.4.0.jar:na] >> > at user$eval9.invoke(form-init7247229328487019774.clj:1) ~[na:na] >> > at clojure.lang.Compiler.eval(Compiler.java:6511) >> > ~[clojure-1.4.0.jar:na] >> > at clojure.lang.Compiler.eval(Compiler.java:6501) >> > ~[clojure-1.4.0.jar:na] >> > at clojure.lang.Compiler.load(Compiler.java:6952) >> > ~[clojure-1.4.0.jar:na] >> > at clojure.lang.Compiler.loadFile(Compiler.java:6912) >> > ~[clojure-1.4.0.jar:na] >> > at clojure.main$load_script.invoke(main.clj:283) >> > ~[clojure-1.4.0.jar:na] >> > at clojure.main$init_opt.invoke(main.clj:288) >> ~[clojure-1.4.0.jar:na] >> > at clojure.main$initialize.invoke(main.clj:316) >> ~[clojure-1.4.0.jar:na] >> > at clojure.main$null_opt.invoke(main.clj:349) >> ~[clojure-1.4.0.jar:na] >> > at clojure.main$main.doInvoke(main.clj:427) ~[clojure-1.4.0.jar:na] >> > at clojure.lang.RestFn.invoke(RestFn.java:421) >> ~[clojure-1.4.0.jar:na] >> > at clojure.lang.Var.invoke(Var.java:419) ~[clojure-1.4.0.jar:na] >> > at clojure.lang.AFn.applyToHelper(AFn.java:163) >> ~[clojure-1.4.0.jar:na] >> > at clojure.lang.Var.applyTo(Var.java:532) ~[clojure-1.4.0.jar:na] >> > at clojure.main.main(main.java:37) ~[clojure-1.4.0.jar:na] >> > Caused by: java.lang.UnsatisfiedLinkError: no jzmq in java.library.path >> > at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1758) >> > ~[na:1.6.0_43] >> > at java.lang.Runtime.loadLibrary0(Runtime.java:823) ~[na:1.6.0_43] >> > at java.lang.System.loadLibrary(System.java:1045) ~[na:1.6.0_43] >> > at org.zeromq.ZMQ.<clinit>(ZMQ.java:34) ~[jzmq-2.1.0.jar:na] >> > at java.lang.Class.forName0(Native Method) ~[na:1.6.0_43] >> > at java.lang.Class.forName(Class.java:171) ~[na:1.6.0_43] >> > at >> backtype.storm.messaging.zmq$loading__4784__auto__.invoke(zmq.clj:1) >> > ~[classes/:na] >> > at clojure.lang.AFn.applyToHelper(AFn.java:159) >> ~[clojure-1.4.0.jar:na] >> > at clojure.lang.AFn.applyTo(AFn.java:151) ~[clojure-1.4.0.jar:na] >> > at clojure.lang.Compiler$InvokeExpr.eval(Compiler.java:3382) >> > ~[clojure-1.4.0.jar:na] >> > ... 27 common frames omitted >> > Compilation failed: Subprocess failed >> > >> > Any suggestion what I can try to get this working? >> > >> > [1] https://www.pcisecuritystandards.org/ >> > [2] http://camel.apache.org/building.html >> > [3] >> https://github.com/nathanmarz/storm/wiki/Creating-a-new-Storm-project >> > >> > Thanks in advance, >> > Christian >> > ----------------- >> > >> > Software Integration Specialist >> > >> > Apache Member >> > V.P. Apache Camel | Apache Camel PMC Member | Apache Camel committer >> > Apache Incubator PMC Member >> > >> > https://www.linkedin.com/pub/christian-mueller/11/551/642 >> > >> > >
