2014-11-12 13:25 GMT+01:00 Volker Krebs <volker.kr...@abas.de>: > Am 12.11.2014 um 10:07 schrieb Lukasz Lenart: >> >> 2014-11-10 16:30 GMT+01:00 Volker Krebs <volker.kr...@abas.de>: >>> >>> https://github.com/VolkerK/struts-examples/ >>> branch develop >> >> >> Thanks a lot for the example, it was very helpful! Btw. you can >> prepare a PR to push it to the struts-example project :-) >> >> One remark, you cannot use such configuration: >> >> <interceptor-ref name="params"> >> <param name="params">someParameter</param> >> </interceptor-ref> >> <interceptor-ref name="basicStack"/> >> >> as in such case params interceptor will run two times - first as a >> part of defaultStack and second time as a part of basicStack, you must >> use it that way >> > > Actually this is what I wanted to do. A couple of years ago I read somewhere > about the params - prepare - params approach. > > First set some paras that are required in the prepare method, and then after > prepare is finished set the some more params (and don't overwrite the ones > from the first params call). > > Ok that's probably too much of the domain (back-end) logic pressed into the > struts framework (workflow), but thats how I did it years ago when > I was naive and unexperienced :)
Good to know, at least you know what you doing :-) Can I prepare new release, what do you think? Regards -- Łukasz + 48 606 323 122 http://www.lenart.org.pl/ --------------------------------------------------------------------- To unsubscribe, e-mail: dev-unsubscr...@struts.apache.org For additional commands, e-mail: dev-h...@struts.apache.org
