This is an automated email from the ASF dual-hosted git repository.
shuber pushed a commit to branch opensearch-persistence
in repository https://gitbox.apache.org/repos/asf/unomi.git
commit f38336c9be147522661f21e097ff09f87a7019f7
Author: Serge Huber <shu...@jahia.com>
AuthorDate: Thu Jan 2 11:04:13 2025 +0100
- Fix NO_COLOR handling
---
build.sh | 544 ++++++++++++++++++++++++++++++++++++++++++++++++++-------------
1 file changed, 430 insertions(+), 114 deletions(-)
diff --git a/build.sh b/build.sh
index 6cf27b522..35a66ea67 100755
--- a/build.sh
+++ b/build.sh
@@ -47,10 +47,183 @@ EOF
exit $exit_code
}
-echo
"-----------------------------------------------------------------------------------------------"
-echo "Apache Unomi Build Script"
-echo
"-----------------------------------------------------------------------------------------------"
-echo
+# Function to detect color support
+setup_colors() {
+ # Only use colors if connected to a terminal
+ if [ -t 1 ]; then
+ # Check if NO_COLOR is set (https://no-color.org/)
+ if [ -z "${NO_COLOR+x}" ]; then
+ # Check if terminal supports colors
+ if [ -n "$TERM" ] && [ "$TERM" != "dumb" ]; then
+ # Check if tput is available
+ if command -v tput > /dev/null && tput setaf 1 >&/dev/null;
then
+ RED='\033[0;31m'
+ GREEN='\033[0;32m'
+ YELLOW='\033[1;33m'
+ BLUE='\033[0;34m'
+ MAGENTA='\033[0;35m'
+ CYAN='\033[0;36m'
+ GRAY='\033[0;90m'
+ BOLD='\033[1m'
+ NC='\033[0m' # No Color
+
+ # Unicode symbols (only if terminal likely supports UTF-8)
+ if [ "$TERM" != "linux" ] && [ -n "$LANG" ] && [ "$LANG"
!= "C" ]; then
+ CHECK_MARK="✔"
+ CROSS_MARK="✘"
+ ARROW="➜"
+ WARNING="⚠"
+ INFO="ℹ"
+ else
+ CHECK_MARK="(+)"
+ CROSS_MARK="(x)"
+ ARROW="(>)"
+ WARNING="(!)"
+ INFO="(i)"
+ fi
+
+ HAS_COLORS=1
+ fi
+ fi
+ fi
+ fi
+
+ # If colors are not supported or disabled, use plain text without escape
sequences
+ if [ -z "${HAS_COLORS+x}" ]; then
+ RED=''
+ GREEN=''
+ YELLOW=''
+ BLUE=''
+ MAGENTA=''
+ CYAN=''
+ GRAY=''
+ BOLD=''
+ NC=''
+
+ # Use ASCII alternatives without escape sequences
+ CHECK_MARK="(+)"
+ CROSS_MARK="(x)"
+ ARROW="(>)"
+ WARNING="(!)"
+ INFO="(i)"
+
+ HAS_COLORS=0
+ fi
+}
+
+# Initialize colors early
+setup_colors
+
+# Function to print section headers
+print_section() {
+ local text="$1"
+ local text_length=${#text}
+ local total_width=80 # Standard terminal width
+ local padding_length=$(( (total_width - text_length - 4) / 2 )) # -4 for
the borders and spaces
+ local left_padding=""
+ local right_padding=""
+
+ # Create padding strings of spaces for the text line
+ for ((i=0; i<padding_length; i++)); do
+ left_padding+=" "
+ right_padding+=" "
+ done
+
+ # Adjust right padding for odd lengths
+ if [ $(( (total_width - text_length) % 2 )) -eq 1 ]; then
+ right_padding+=" "
+ fi
+
+ if [ "$HAS_COLORS" -eq 1 ]; then
+ echo -e
"\n${BLUE}╔════════════════════════════════════════════════════════════════════════════╗${NC}"
+ echo -e
"${BLUE}║${NC}${left_padding}${BOLD}${text}${NC}${right_padding}${BLUE}║${NC}"
+ echo -e
"${BLUE}╚════════════════════════════════════════════════════════════════════════════╝${NC}"
+ else
+ echo -e
"\n+------------------------------------------------------------------------------+"
+ echo -e "| ${left_padding}${text}${right_padding} |"
+ echo
"+------------------------------------------------------------------------------+"
+ fi
+}
+
+# Function to print status messages
+print_status() {
+ local status=$1
+ local message=$2
+
+ if [ "$HAS_COLORS" -eq 1 ]; then
+ case $status in
+ "success")
+ echo -e " ${GREEN}${CHECK_MARK}${NC} ${GREEN}${message}${NC}"
+ ;;
+ "error")
+ echo -e " ${RED}${CROSS_MARK}${NC} ${RED}${message}${NC}"
+ ;;
+ "warning")
+ echo -e " ${YELLOW}${WARNING}${NC} ${YELLOW}${message}${NC}"
+ ;;
+ "info")
+ echo -e " ${CYAN}${INFO}${NC} ${CYAN}${message}${NC}"
+ ;;
+ *)
+ echo -e " ${BLUE}${ARROW}${NC} ${message}"
+ ;;
+ esac
+ else
+ # No colors - use plain text without escape sequences
+ local symbol
+ case $status in
+ "success")
+ symbol="${CHECK_MARK}"
+ ;;
+ "error")
+ symbol="${CROSS_MARK}"
+ ;;
+ "warning")
+ symbol="${WARNING}"
+ ;;
+ "info")
+ symbol="${INFO}"
+ ;;
+ *)
+ symbol="${ARROW}"
+ ;;
+ esac
+ echo " ${symbol} ${message}"
+ fi
+}
+
+# Enhanced progress tracking
+print_progress() {
+ local current=$1
+ local total=$2
+ local message=$3
+ local percentage=$((current * 100 / total))
+
+ if [ "$HAS_COLORS" -eq 1 ]; then
+ local filled=$((percentage / 2))
+ local empty=$((50 - filled))
+
+ local progress="["
+ for ((i=0; i<filled; i++)); do progress+="█"; done
+ for ((i=0; i<empty; i++)); do progress+="░"; done
+ progress+="]"
+
+ echo -e "\r${CYAN}${progress}${NC} ${percentage}%
${GRAY}${message}${NC}"
+ else
+ local filled=$((percentage / 4))
+ local empty=$((25 - filled))
+
+ local progress="["
+ for ((i=0; i<filled; i++)); do progress+="#"; done
+ for ((i=0; i<empty; i++)); do progress+="-"; done
+ progress+="]"
+
+ echo -e "\r${progress} ${percentage}% ${message}"
+ fi
+}
+
+# Add the new section header
+print_section "Apache Unomi Build Script"
# Default values
SKIP_TESTS=false
@@ -67,44 +240,107 @@ USE_OPENSEARCH=false
NO_KARAF=false
AUTO_START=""
-# Function to display usage
+# Enhanced usage function with color support
usage() {
- cat << "EOF"
+ if [ "$HAS_COLORS" -eq 1 ]; then
+ echo -e "${CYAN}"
+ cat << "EOF"
_ _ _____ _ ____
| | | | ___| | | _ \
| |__| | |__ | | | |_) |
| __ | __|| | | __/
| | | | |___| |____| |
|_| |_\_____|______|_|
+EOF
+ echo -e "${NC}"
+ echo -e "${BOLD}Usage:${NC} $0 [options]"
+ echo
+ echo -e "${BOLD}Options:${NC}"
+ echo -e " ${CYAN}-h, --help${NC} Show this help
message"
+ echo -e " ${CYAN}-s, --skip-tests${NC} Skip all tests"
+ echo -e " ${CYAN}-i, --integration-tests${NC} Run integration
tests"
+ echo -e " ${CYAN}-d, --deploy${NC} Deploy after build"
+ echo -e " ${CYAN}-X, --maven-debug${NC} Enable Maven debug
output"
+ echo -e " ${CYAN}-o, --offline${NC} Run Maven in offline
mode"
+ echo -e " ${CYAN}--debug${NC} Run Karaf in debug
mode"
+ echo -e " ${CYAN}--debug-port PORT${NC} Set debug port
(default: 5005)"
+ echo -e " ${CYAN}--debug-suspend${NC} Suspend JVM until
debugger connects"
+ echo -e " ${CYAN}--no-maven-cache${NC} Disable Maven build
cache"
+ echo -e " ${CYAN}--purge-maven-cache${NC} Purge local Maven
cache before building"
+ echo -e " ${CYAN}--karaf-home PATH${NC} Set Karaf home
directory for deployment"
+ echo -e " ${CYAN}--use-opensearch${NC} Use OpenSearch
instead of ElasticSearch"
+ echo -e " ${CYAN}--no-karaf${NC} Build without starting
Karaf"
+ echo -e " ${CYAN}--auto-start ENGINE${NC} Auto-start with
specified engine"
+ else
+ cat << "EOF"
+ _ _ _____ _ ____
+ | | | | ___| | | _ \
+ | |__| | |__ | | | |_) |
+ | __ | __|| | | __/
+ | | | | |___| |____| |
+ |_| |_\_____|______|_|
EOF
- echo "Usage: $0 [options]"
- echo "Options:"
- echo " -h, --help Show this help message"
- echo " -s, --skip-tests Skip all tests"
- echo " -i, --integration-tests Run integration tests"
- echo " -d, --deploy Deploy after build"
- echo " -X, --maven-debug Enable Maven debug output"
- echo " -o, --offline Run Maven in offline mode"
- echo " --debug Run Karaf in debug mode"
- echo " --debug-port PORT Set debug port (default: 5005)"
- echo " --debug-suspend Suspend JVM until debugger connects"
- echo " --no-maven-cache Disable Maven build cache"
- echo " --purge-maven-cache Purge local Maven cache before building"
- echo " --karaf-home PATH Set Karaf home directory for deployment"
- echo " --use-opensearch Use OpenSearch instead of ElasticSearch
for tests"
- echo " --no-karaf Build without starting Karaf"
- echo " --auto-start ENGINE Auto-start with specified engine
(elasticsearch or opensearch)"
- echo ""
+ echo
+ echo "Usage: $0 [options]"
+ echo
+ echo "Options:"
+ echo " -h, --help Show this help message"
+ echo " -s, --skip-tests Skip all tests"
+ echo " -i, --integration-tests Run integration tests"
+ echo " -d, --deploy Deploy after build"
+ echo " -X, --maven-debug Enable Maven debug output"
+ echo " -o, --offline Run Maven in offline mode"
+ echo " --debug Run Karaf in debug mode"
+ echo " --debug-port PORT Set debug port (default: 5005)"
+ echo " --debug-suspend Suspend JVM until debugger connects"
+ echo " --no-maven-cache Disable Maven build cache"
+ echo " --purge-maven-cache Purge local Maven cache before
building"
+ echo " --karaf-home PATH Set Karaf home directory for
deployment"
+ echo " --use-opensearch Use OpenSearch instead of
ElasticSearch"
+ echo " --no-karaf Build without starting Karaf"
+ echo " --auto-start ENGINE Auto-start with specified engine"
+ fi
+
+ echo
echo "Examples:"
- echo " $0 --integration-tests --search-engine opensearch"
- echo " $0 --debug --debug-port 5006 --debug-suspend"
- echo " $0 --deploy --karaf-home ~/apache-karaf"
- echo " $0 --purge-maven-cache --no-maven-cache"
- echo " $0 -X --integration-tests Run tests with Maven debug output"
- echo " $0 -o -X Run offline with Maven debug output"
- echo " $0 --integration-tests --use-opensearch"
- echo " $0 --no-karaf --auto-start opensearch"
+ if [ "$HAS_COLORS" -eq 1 ]; then
+ echo -e " ${GRAY}# Build with integration tests using OpenSearch${NC}"
+ echo -e " ${GRAY}$0 --integration-tests --use-opensearch${NC}"
+ echo -e
+ echo -e " ${GRAY}# Build in debug mode${NC}"
+ echo -e " ${GRAY}$0 --debug --debug-port 5006 --debug-suspend${NC}"
+ echo -e
+ echo -e " ${GRAY}# Deploy to specific Karaf instance${NC}"
+ echo -e " ${GRAY}$0 --deploy --karaf-home ~/apache-karaf${NC}"
+ echo -e
+ echo -e " ${GRAY}# Build without Karaf and auto-start OpenSearch${NC}"
+ echo -e " ${GRAY}$0 --no-karaf --auto-start opensearch${NC}"
+ echo -e
+ echo -e " ${GRAY}# Run without colored output${NC}"
+ echo -e " ${GRAY}NO_COLOR=1 $0${NC}"
+ echo -e " ${GRAY}# or ${NC}"
+ echo -e " ${GRAY}export NO_COLOR=1${NC}"
+ echo -e " ${GRAY}$0${NC}"
+ else
+ echo " # Build with integration tests using OpenSearch"
+ echo " $0 --integration-tests --use-opensearch"
+ echo
+ echo " # Build in debug mode"
+ echo " $0 --debug --debug-port 5006 --debug-suspend"
+ echo
+ echo " # Deploy to specific Karaf instance"
+ echo " $0 --deploy --karaf-home ~/apache-karaf"
+ echo
+ echo " # Build without Karaf and auto-start OpenSearch"
+ echo " $0 --no-karaf --auto-start opensearch"
+ echo
+ echo " # Run without colored output"
+ echo " NO_COLOR=1 $0"
+ echo " # or"
+ echo " export NO_COLOR=1"
+ echo " $0"
+ fi
exit 1
}
@@ -285,19 +521,6 @@ get_elapsed_time() {
printf "%02d:%02d" $((elapsed/60)) $((elapsed%60))
}
-print_progress() {
- local step=$1
- local total=$2
- local msg=$3
- local elapsed=$(get_elapsed_time)
- local width=50
- local progress=$((width * step / total))
- printf "\r["
- printf "%${progress}s" | tr ' ' '#'
- printf "%$((width-progress))s" | tr ' ' '-'
- printf "] %d%% %s (%s)" $((100 * step / total)) "$msg" "$elapsed"
-}
-
# Function to validate combinations of options
validate_options() {
# Check for mutually exclusive options
@@ -351,50 +574,74 @@ validate_options() {
# Function to check system requirements
check_system_requirements() {
- local min_memory=2048 # 2GB in MB
- local min_disk=1024 # 1GB in MB
-
- # Check Java version
- if ! command -v java >/dev/null 2>&1; then
- echo "Error: Java is not installed"
- exit 1
- fi
- java_version=$(java -version 2>&1 | awk -F '"' '/version/ {print $2}')
- if [[ ! "$java_version" =~ ^1[1-9]\. && ! "$java_version" =~ ^[2-9][0-9]\.
]]; then
- echo "Error: Java 11 or higher is required (found: $java_version)"
+ print_section "System Requirements Check"
+ local has_warnings=false
+
+ # Java check
+ if command -v java >/dev/null 2>&1; then
+ java_version=$(java -version 2>&1 | awk -F '"' '/version/ {print $2}')
+ if [[ "$java_version" =~ ^1[1-9]\. || "$java_version" =~ ^[2-9][0-9]\.
]]; then
+ print_status "success" "Java ${java_version} detected"
+ else
+ print_status "error" "Java 11 or higher required (found:
${java_version})"
+ exit 1
+ fi
+ else
+ print_status "error" "Java not found"
exit 1
fi
- # Check Maven if not in offline mode
- if [ "$MAVEN_OFFLINE" = false ] && ! command -v mvn >/dev/null 2>&1; then
- echo "Error: Maven is not installed"
- exit 1
+ # Maven check
+ if [ "$MAVEN_OFFLINE" = false ]; then
+ if command -v mvn >/dev/null 2>&1; then
+ mvn_version=$(mvn --version | head -n 1)
+ print_status "success" "${mvn_version}"
+ else
+ print_status "error" "Maven not found"
+ exit 1
+ fi
fi
- # Check available memory
+ # Memory check
if command -v free >/dev/null 2>&1; then
available_memory=$(free -m | awk '/^Mem:/{print $2}')
- if [ "$available_memory" -lt "$min_memory" ]; then
- echo "Warning: Less than ${min_memory}MB of memory available
(${available_memory}MB)"
- prompt_continue
+ if [ "$available_memory" -lt 2048 ]; then
+ print_status "warning" "Low memory: ${available_memory}MB
available (2048MB recommended)"
+ has_warnings=true
+ else
+ print_status "success" "Memory: ${available_memory}MB available"
fi
fi
- # Check available disk space
+ # Disk space check
if command -v df >/dev/null 2>&1; then
available_disk=$(df -m . | awk 'NR==2 {print $4}')
- if [ "$available_disk" -lt "$min_disk" ]; then
- echo "Warning: Less than ${min_disk}MB of disk space available
(${available_disk}MB)"
- prompt_continue
+ if [ "$available_disk" -lt 1024 ]; then
+ print_status "warning" "Low disk space: ${available_disk}MB
available (1024MB recommended)"
+ has_warnings=true
+ else
+ print_status "success" "Disk space: ${available_disk}MB available"
fi
fi
+
+ if [ "$has_warnings" = true ]; then
+ echo
+ prompt_continue "Continue despite warnings?"
+ fi
}
-# Function to prompt for continuation
+# Enhanced prompt_continue with color support
prompt_continue() {
- read -p "Continue anyway? (y/N) " -n 1 -r
+ local message=${1:-"Continue?"}
+ if [ "$HAS_COLORS" -eq 1 ]; then
+ echo -en "${YELLOW}${WARNING} ${message} (y/N) ${NC}"
+ else
+ echo -en "${WARNING} ${message} (y/N) "
+ fi
+ read -n 1 -r
echo
if [[ ! $REPLY =~ ^[Yy]$ ]]; then
+ print_status "error" "Operation cancelled by user"
exit 1
fi
}
@@ -416,34 +663,53 @@ echo "Building..."
echo "Estimated time: 3-5 minutes for build, 50-60 minutes with integration
tests"
start_timer
-# Build phases
+# Build phases with enhanced output
total_steps=2
current_step=0
print_progress $((++current_step)) $total_steps "Cleaning previous build..."
-$MVN_CMD clean $MVN_OPTS
+if [ "$HAS_COLORS" -eq 1 ]; then
+ echo -e "${GRAY}Running: $MVN_CMD clean $MVN_OPTS${NC}"
+else
+ echo "Running: $MVN_CMD clean $MVN_OPTS"
+fi
+$MVN_CMD clean $MVN_OPTS || {
+ print_status "error" "Maven clean failed"
+ exit 1
+}
-print_progress $((++current_step)) $total_steps "Compiling, testing and
installing artifacts..."
-$MVN_CMD install $MVN_OPTS
+print_progress $((++current_step)) $total_steps "Compiling and installing
artifacts..."
+if [ "$HAS_COLORS" -eq 1 ]; then
+ echo -e "${GRAY}Running: $MVN_CMD install $MVN_OPTS${NC}"
+else
+ echo "Running: $MVN_CMD install $MVN_OPTS"
+fi
+$MVN_CMD install $MVN_OPTS || {
+ print_status "error" "Maven install failed"
+ exit 1
+}
-echo -e "\nBuild completed in $(get_elapsed_time)"
+print_status "success" "Build completed in $(get_elapsed_time)"
+# Deployment section with enhanced output
if [ "$DEPLOY" = true ]; then
# Validate Karaf home directory
if [ -z "$CONTEXT_SERVER_KARAF_HOME" ]; then
- echo "Error: Karaf home directory not set. Use --karaf-home option."
+ print_status "error" "Karaf home directory not set. Use --karaf-home
option."
exit 1
fi
if [ ! -d "$CONTEXT_SERVER_KARAF_HOME" ]; then
- echo "Error: Karaf home directory does not exist:
$CONTEXT_SERVER_KARAF_HOME"
+ print_status "error" "Karaf home directory does not exist:
$CONTEXT_SERVER_KARAF_HOME"
exit 1
fi
if [ ! -w "$CONTEXT_SERVER_KARAF_HOME/deploy" ]; then
- echo "Error: No write permission to Karaf deploy directory:
$CONTEXT_SERVER_KARAF_HOME/deploy"
+ print_status "error" "No write permission to Karaf deploy directory:
$CONTEXT_SERVER_KARAF_HOME/deploy"
exit 1
fi
- cat << "EOF"
+ if [ "$HAS_COLORS" -eq 1 ]; then
+ echo -e "${MAGENTA}"
+ cat << "EOF"
____ _____ ____ _ _____ __
| _ \| ____| _ \| | / _ \ \ / /
| | | | _| | |_) | | | | | \ V /
@@ -451,101 +717,140 @@ if [ "$DEPLOY" = true ]; then
|____/|_____|_| |_____\___/ |_|
EOF
+ echo -e "${NC}"
+ else
+ cat << "EOF"
+ ____ _____ ____ _ _____ __
+ | _ \| ____| _ \| | / _ \ \ / /
+ | | | | _| | |_) | | | | | \ V /
+ | |_| | |___| __/| |__| |_| || |
+ |____/|_____|_| |_____\___/ |_|
+
+EOF
+ fi
+
start_timer
total_deploy_steps=3
current_step=0
print_progress $((++current_step)) $total_deploy_steps "Copying KAR
package..."
if [ ! -f "kar/target/unomi-kar-$UNOMI_VERSION.kar" ]; then
- echo "Error: KAR file not found:
kar/target/unomi-kar-$UNOMI_VERSION.kar"
+ print_status "error" "KAR file not found:
kar/target/unomi-kar-$UNOMI_VERSION.kar"
exit 1
fi
- cp -v kar/target/unomi-kar-$UNOMI_VERSION.kar
$CONTEXT_SERVER_KARAF_HOME/deploy/
- if [ $? -ne 0 ]; then
- echo "Error: Failed to copy KAR file to deploy directory"
+ cp -v kar/target/unomi-kar-$UNOMI_VERSION.kar
$CONTEXT_SERVER_KARAF_HOME/deploy/ || {
+ print_status "error" "Failed to copy KAR file to deploy directory"
exit 1
- fi
+ }
+ print_status "success" "KAR package copied successfully"
print_progress $((++current_step)) $total_deploy_steps "Purging Karaf
Maven repository..."
if [ -d "$CONTEXT_SERVER_KARAF_HOME/data/maven/repository" ]; then
rm -rf "$CONTEXT_SERVER_KARAF_HOME/data/maven/repository/"* || {
- echo "Error: Failed to purge Karaf Maven repository"
+ print_status "error" "Failed to purge Karaf Maven repository"
exit 1
}
+ print_status "success" "Karaf Maven repository purged"
+ else
+ print_status "info" "Karaf Maven repository not found, skipping purge"
fi
print_progress $((++current_step)) $total_deploy_steps "Purging Karaf
temporary files..."
if [ -d "$CONTEXT_SERVER_KARAF_HOME/data/tmp" ]; then
rm -rf "$CONTEXT_SERVER_KARAF_HOME/data/tmp/"* || {
- echo "Error: Failed to purge Karaf temporary directory"
+ print_status "error" "Failed to purge Karaf temporary directory"
exit 1
}
+ print_status "success" "Karaf temporary files purged"
+ else
+ print_status "info" "Karaf temporary directory not found, skipping
purge"
fi
- echo -e "\nDeployment completed in $(get_elapsed_time)"
+ print_status "success" "Deployment completed in $(get_elapsed_time)"
fi
-if [ "$DEPLOY" = false ]; then
- cat << "EOF"
+# Karaf startup section
+if [ "$NO_KARAF" = false ]; then
+ if [ "$HAS_COLORS" -eq 1 ]; then
+ echo -e "${GREEN}"
+ cat << "EOF"
_ __ _ ____ _ _____
| |/ / / \ | _ \ / \ | ___|
| ' / / _ \ | |_) | / _ \ | |_
| . \ / ___ \| _ < / ___ \| _|
|_|\_\/_/ \_\_| \_\/_/ \_\_|
-
EOF
- start_timer
- total_karaf_steps=3
+ echo -e "${NC}"
+ else
+ cat << "EOF"
+ _ __ _ ____ _ _____
+ | |/ / / \ | _ \ / \ | ___|
+ | ' / / _ \ | |_) | / _ \ | |_
+ | . \ / ___ \| _ < / ___ \| _|
+ |_|\_\/_/ \_\_| \_\/_/ \_\_|
+EOF
+ fi
+
+ total_karaf_steps=4 # Increased for additional checks
current_step=0
+ # Check Karaf environment
+ print_progress $((++current_step)) $total_karaf_steps "Checking Karaf
environment..."
+ if [ ! -d "package/target" ]; then
+ print_status "error" "Build directory not found. Did the build
complete successfully?"
+ exit 1
+ fi
+
pushd package/target || {
- echo "Error: Failed to change directory to package/target"
+ print_status "error" "Failed to change directory to package/target"
exit 1
}
+ # Verify Unomi version is set
+ if [ -z "$UNOMI_VERSION" ]; then
+ print_status "error" "UNOMI_VERSION is not set"
+ exit 1
+ fi
+
print_progress $((++current_step)) $total_karaf_steps "Uncompressing Unomi
package..."
if [ ! -f "unomi-$UNOMI_VERSION.tar.gz" ]; then
- echo "Error: Unomi package not found: unomi-$UNOMI_VERSION.tar.gz"
+ print_status "error" "Unomi package not found:
unomi-$UNOMI_VERSION.tar.gz"
exit 1
fi
tar zxvf unomi-$UNOMI_VERSION.tar.gz
print_progress $((++current_step)) $total_karaf_steps "Installing optional
databases..."
- # Copy optional databases with error handling
if [ -f "../../GeoLite2-City.mmdb" ]; then
- echo "Installing GeoLite2 City database..."
+ print_status "info" "Installing GeoLite2 City database..."
cp -v ../../GeoLite2-City.mmdb unomi-$UNOMI_VERSION/etc || {
- echo "Error: Failed to copy GeoLite2 database"
+ print_status "error" "Failed to copy GeoLite2 database"
exit 1
}
+ else
+ print_status "info" "GeoLite2 City database not found (optional)"
fi
if [ -f "../../allCountries.zip" ]; then
- echo "Installing Geonames countries database..."
+ print_status "info" "Installing Geonames countries database..."
cp -v ../../allCountries.zip unomi-$UNOMI_VERSION/etc || {
- echo "Error: Failed to copy Geonames database"
+ print_status "error" "Failed to copy Geonames database"
exit 1
}
+ else
+ print_status "info" "Geonames countries database not found (optional)"
fi
cd unomi-$UNOMI_VERSION/bin || {
- echo "Error: Failed to change directory to Karaf bin directory"
+ print_status "error" "Failed to change directory to Karaf bin
directory"
exit 1
}
- # Configure auto-start if specified
- if [ ! -z "$AUTO_START" ]; then
- echo "Configuring auto-start for $AUTO_START"
- export KARAF_OPTS="-Dunomi.autoStart=$AUTO_START"
- fi
-
print_progress $((++current_step)) $total_karaf_steps "Starting Karaf..."
if [ "$DEBUG" = true ]; then
- echo "Starting Karaf in debug mode (port: $KARAF_DEBUG_PORT, suspend:
$KARAF_DEBUG_SUSPEND)"
- # Check if debug port is already in use
- if command_exists nc; then
- if nc -z localhost $KARAF_DEBUG_PORT; then
- echo "Error: Debug port $KARAF_DEBUG_PORT is already in use"
+ print_status "info" "Debug mode enabled (port: $KARAF_DEBUG_PORT,
suspend: $KARAF_DEBUG_SUSPEND)"
+ if command -v nc >/dev/null 2>&1; then
+ if nc -z localhost "$KARAF_DEBUG_PORT" 2>/dev/null; then
+ print_status "error" "Port $KARAF_DEBUG_PORT is already in use"
exit 1
fi
fi
@@ -554,16 +859,27 @@ EOF
fi
if [ ! -x "./karaf" ]; then
- echo "Error: Karaf executable not found or not executable"
+ print_status "error" "Karaf executable not found or not executable"
exit 1
fi
- echo "Apache Unomi features installed, use [unomi:start] to start it."
+ if [ ! -z "$AUTO_START" ]; then
+ print_status "info" "Configuring auto-start for $AUTO_START"
+ export KARAF_OPTS="-Dunomi.autoStart=$AUTO_START"
+ else
+ print_status "info" "Use [unomi:start] to start Unomi after Karaf
initialization"
+ fi
+
./karaf || {
- echo "Error: Karaf failed to start"
+ print_status "error" "Karaf failed to start"
exit 1
}
popd || true
+else
+ print_status "info" "Skipping Karaf startup (--no-karaf specified)"
+ if [ ! -z "$AUTO_START" ]; then
+ print_status "info" "Note: auto-start ($AUTO_START) will be applied
when Karaf is started manually"
+ fi
fi
cat << "EOF"
