Salut , apres avoir installer en TFTP la Kamikaze 8.09 , bien que la carte
Wifi soit bien detecté , impossible de lui fixer un SSID en mode client :
meme en appelant le script " wifi " en redemarrant le service network , le
ssid ne se fixe pas et donc impossible de se connecter , avez vous deja eu
ça ? wl0 IEEE 802.11-DS ESSID:"" Mode:Managed Frequency:2.417 GHz Access
Point: Not-Associated Bit Rate:54 Mb/s Tx-Power:32 dBm Retry min limit:7 RTS
thr:off Fragment thr:off Power Management:off Link Quality:5 Signal level:0
Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx
excessive retries:0 Invalid misc:0 Missed beacon:0 r...@openwrt:~# cat
/etc/config/wireless config 'wifi-device' 'wl0' option 'type' 'broadcom'
option 'disabled' '0' option 'channel' '2' option 'txpower' '50' config
'wifi-iface' option 'device' 'wl0' option 'encryption' 'none' option 'ssid'
'WIFI_VIARD' option 'network' 'wan' option 'mode' 'sta' r...@openwrt:~# cat
/etc/config/network config 'switch' 'eth0' option 'vlan0' '1 2 3 4 5*'
option 'vlan1' '0 5' config 'interface' 'loopback' option 'ifname' 'lo'
option 'proto' 'static' option 'ipaddr' '127.0.0.1' option 'netmask'
'255.0.0.0' config 'interface' 'lan' option 'type' 'bridge' option 'ifname'
'eth0.0' option 'proto' 'static' option 'netmask' '255.255.255.0' option
'ipaddr' '192.168.2.1' option 'gateway' '192.168.1.1' option 'dns'
'192.168.1.1' config 'interface' 'wan' option 'proto' 'dhcp' option
'_ifname' 'eth0.1' option 'ifname' 'wl0' option 'defaultroute' '0' option
'peerdns' '0' PS : y a un probleme sur le forum car on ne peux plus posté
...

Répondre à