Hi Thilini,
Were you able to get AS 5 fronted by LB? We are supposed to setup AS
cluster in lab tomorrow and planning to use LB there. Please let us know
the "exact" instructions to set it up.
Thanks!
Charitha
On Wed, Jul 25, 2012 at 6:00 AM, Sanjeewa Malalgoda <sanje...@wso2.com>wrote:
> Hi Thilini,
> Please test this with attached patch.
>
> Thanks.
>
>
> On Tue, Jul 24, 2012 at 5:14 PM, Thilini Ishaka <thil...@wso2.com> wrote:
>
>> That did not solve the issue.
>> Appreciate if you can have a look for this.
>>
>> Thanks
>> Thilini
>>
>>
>> On Wed, Jul 25, 2012 at 5:17 AM, Sanjeewa Malalgoda <sanje...@wso2.com>wrote:
>>
>>> But this is wrong thilini. If you specify the config as above load
>>> balancer will behave this way.
>>> Please do not forget that * represents all other tenant, except the
>>> specially specified. In your case
>>> specified tenant range is 1 to 200.
>>>
>>> wso2.as1.domain tenant_range 1-100
>>> wso2.as2.domain tenant_range 101-200;
>>> rest of tenant will direct to the cluster with * mark
>>>
>>> So if you are trying to log in with tenant ID 2 or 3 obviously it will
>>> fail. Because you are not running application
>>> cluster with domain wso2.as1.domain.
>>> Correct it and re try.
>>>
>>> Thanks.
>>>
>>>
>>> On Tue, Jul 24, 2012 at 4:34 PM, Thilini Ishaka <thil...@wso2.com>wrote:
>>>
>>>> So please check the axis2 xmls for appservers. I am using only the
>>>> domains given for tenant * range.
>>>
>>>
>>>
>>>
>>>> On Wed, Jul 25, 2012 at 4:59 AM, Sanjeewa Malalgoda
>>>> <sanje...@wso2.com>wrote:
>>>>
>>>>> Yes that configuration is fine. but the config files you sent to me
>>>>> offline is having entries like follows
>>>>> Thanks.
>>>>>
>>>>> appserver1 {
>>>>> # multiple hosts should be separated by a comma.
>>>>> hosts appserver.dev.example.com,
>>>>> as.cloud-dev.wso2.com;
>>>>> domains {
>>>>> wso2.as1.domain {
>>>>> # for more info on Tenant aware load balancing please
>>>>> refer to
>>>>> #
>>>>> http://sanjeewamalalgoda.blogspot.com/2012/05/tenant-aware-load-balancer.html
>>>>> tenant_range 1-100;
>>>>> }
>>>>> wso2.as2.domain {
>>>>> tenant_range 101-200;
>>>>> }
>>>>> wso2.as.dev.domain {
>>>>> # all tenants other than 1-200 will belong to this
>>>>> domain.
>>>>> tenant_range *;
>>>>> }
>>>>> }
>>>>> }
>>>>>
>>>>> appserver2 {
>>>>> # multiple hosts should be separated by a comma.
>>>>> hosts appserver.prod.example.com,
>>>>> as.cloud-prod.wso2.com;
>>>>> domains {
>>>>> wso2.as1.domain {
>>>>> # for more info on Tenant aware load balancing please
>>>>> refer to
>>>>> #
>>>>> http://sanjeewamalalgoda.blogspot.com/2012/05/tenant-aware-load-balancer.html
>>>>> tenant_range 1-100;
>>>>> }
>>>>> wso2.as2.domain {
>>>>> tenant_range 101-200;
>>>>> }
>>>>> wso2.as.prod.domain {
>>>>> # all tenants other than 1-200 will belong to this
>>>>> domain.
>>>>> tenant_range *;
>>>>> }
>>>>> }
>>>>> }
>>>>>
>>>>>
>>>>> appserver3 {
>>>>> # multiple hosts should be separated by a comma.
>>>>> hosts appserver.test.example.com,
>>>>> as.cloud-live.wso2.com;
>>>>> domains {
>>>>> wso2.as1.domain {
>>>>> # for more info on Tenant aware load balancing please
>>>>> refer to
>>>>> #
>>>>> http://sanjeewamalalgoda.blogspot.com/2012/05/tenant-aware-load-balancer.html
>>>>> tenant_range 1-100;
>>>>> }
>>>>> wso2.as2.domain {
>>>>> tenant_range 101-200;
>>>>> }
>>>>> wso2.as.test.domain {
>>>>> # all tenants other than 1-200 will belong to this
>>>>> domain.
>>>>> tenant_range *;
>>>>> }
>>>>> }
>>>>> }
>>>>>
>>>>> On Tue, Jul 24, 2012 at 4:18 PM, Thilini Ishaka <thil...@wso2.com>wrote:
>>>>>
>>>>>> Hi Sanjeewa,
>>>>>>
>>>>>> In my config, I have given the tenant range as * . And I am running
>>>>>> all the instances [ lb + AS(s) ] on a single machine.
>>>>>>
>>>>>> appserver1 {
>>>>>> # multiple hosts should be separated by a comma.
>>>>>> hosts appserver.dev.example.com,
>>>>>> as.cloud-dev.wso2.com;
>>>>>> domains {
>>>>>> wso2.as.dev.domain {
>>>>>> # all tenants other than 1-200 will belong to this
>>>>>> domain.
>>>>>> tenant_range *;
>>>>>> }
>>>>>> }
>>>>>> }
>>>>>>
>>>>>> Rest of the configs similar to given here.
>>>>>> http://nirmalfdo.blogspot.com/2012/06/fronting-wso2-application-server-50.html
>>>>>> Membership
>>>>>> scheme is wka.
>>>>>>
>>>>>> Thanks
>>>>>> Thilini
>>>>>>
>>>>>>
>>>>>> On Wed, Jul 25, 2012 at 3:12 AM, Sanjeewa Malalgoda <
>>>>>> sanje...@wso2.com> wrote:
>>>>>>
>>>>>>> yes if so we don't need.
>>>>>>> Thanks.
>>>>>>>
>>>>>>>
>>>>>>> On Tue, Jul 24, 2012 at 2:36 PM, Afkham Azeez <az...@wso2.com>wrote:
>>>>>>>
>>>>>>>> If tenant range is * for all services, you should not need the
>>>>>>>> usermgt configuration
>>>>>>>>
>>>>>>>> --
>>>>>>>> Afkham Azeez
>>>>>>>> Sent from my phone
>>>>>>>> On Jul 25, 2012 2:18 AM, "Sanjeewa Malalgoda" <sanje...@wso2.com>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Tue, Jul 24, 2012 at 1:08 PM, Sanjeewa Malalgoda <
>>>>>>>>> sanje...@wso2.com> wrote:
>>>>>>>>>
>>>>>>>>>> Hi,
>>>>>>>>>> It seems you haven't configure User management xml file in ELB
>>>>>>>>>> properly. Please use the same configuration
>>>>>>>>>> that you used for other products else LB cant get tenant id from
>>>>>>>>>> domain. Every product and ELB should pointed
>>>>>>>>>> to same user base. Seems many people keep reporting load balancer
>>>>>>>>>> is not working because of
>>>>>>>>>> this configuration issue. I have tested this type of scenario.
>>>>>>>>>> Nirmal, Thilini if you are still getting errors let me know.
>>>>>>>>>>
>>>>>>>>>> Thanks.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Tue, Jul 24, 2012 at 2:26 AM, Thilini Ishaka <thil...@wso2.com
>>>>>>>>>> > wrote:
>>>>>>>>>>
>>>>>>>>>>> When using passthrough I came up with this issue. Switching to
>>>>>>>>>>> nhttp did not give any warning on LB but still I am having long
>>>>>>>>>>> delay in
>>>>>>>>>>> sign-in.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Tue, Jul 24, 2012 at 12:10 PM, Thilini Ishaka <
>>>>>>>>>>> thil...@wso2.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Hi,
>>>>>>>>>>>>
>>>>>>>>>>>> Configured appserver clusters fronted with the LB. (latest
>>>>>>>>>>>> trunk packs)
>>>>>>>>>>>>
>>>>>>>>>>>> Member join is successful.
>>>>>>>>>>>> INFO - DefaultGroupManagementAgent Application member
>>>>>>>>>>>> Host:127.0.0.1, Port: 4200, HTTP:9765, HTTPS:9445, ACTIVE:true
>>>>>>>>>>>> joined
>>>>>>>>>>>> application cluster
>>>>>>>>>>>>
>>>>>>>>>>>> When I login to the AS mgt console I have to wait for about
>>>>>>>>>>>> 1min to complete the sign-in process. And I get below logs from LB.
>>>>>>>>>>>>
>>>>>>>>>>>> LB
>>>>>>>>>>>> ----
>>>>>>>>>>>> *[2012-07-24 11:57:30,213] WARN - TargetHandler Response
>>>>>>>>>>>> received while the handler is in an inconsistent state
>>>>>>>>>>>> REQUEST_READY
>>>>>>>>>>>> *
>>>>>>>>>>>> *[2012-07-24 11:57:30,213] WARN - TargetHandler Connection
>>>>>>>>>>>> closed by target host while receiving the response*
>>>>>>>>>>>> *[2012-07-24 11:57:30,213] WARN - SynapseCallbackReceiver
>>>>>>>>>>>> Synapse received a response for the request with message Id :
>>>>>>>>>>>> urn:uuid:ab93e0ff-9812-4512-a87d-a398dc8413f4 But a callback is not
>>>>>>>>>>>> registered (anymore) to process this response*
>>>>>>>>>>>>
>>>>>>>>>>>> Appserver cluster log
>>>>>>>>>>>> ------------------------------
>>>>>>>>>>>> [2012-07-24 11:55:18,512] INFO
>>>>>>>>>>>> {org.wso2.carbon.core.services.util.CarbonAuthenticationUtil} -
>>>>>>>>>>>> 'admin@carbon.super [-1234]' logged in at [2012-07-24
>>>>>>>>>>>> 11:55:18,512+0530] from IP address 127.0.0.1
>>>>>>>>>>>>
>>>>>>>>>>>> Did anybody got the same issue previously? Kindly appreciate
>>>>>>>>>>>> any help on this.
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks
>>>>>>>>>>>> Thilini
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> --
>>>>>>>>>>> Thilini Ishaka
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> Dev mailing list
>>>>>>>>>>> Dev@wso2.org
>>>>>>>>>>> http://wso2.org/cgi-bin/mailman/listinfo/dev
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> *Sanjeewa Malalgoda*
>>>>>>>>>> mobile : +94 713068779
>>>>>>>>>> <http://sanjeewamalalgoda.blogspot.com/>blog
>>>>>>>>>> :http://sanjeewamalalgoda.blogspot.com/<http://sanjeewamalalgoda.blogspot.com/>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> *Sanjeewa Malalgoda*
>>>>>>>>> mobile : +94 713068779
>>>>>>>>> <http://sanjeewamalalgoda.blogspot.com/>blog
>>>>>>>>> :http://sanjeewamalalgoda.blogspot.com/<http://sanjeewamalalgoda.blogspot.com/>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> *Sanjeewa Malalgoda*
>>>>>>> mobile : +94 713068779
>>>>>>> <http://sanjeewamalalgoda.blogspot.com/>blog
>>>>>>> :http://sanjeewamalalgoda.blogspot.com/<http://sanjeewamalalgoda.blogspot.com/>
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> --
>>>>>> Thilini Ishaka
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> *Sanjeewa Malalgoda*
>>>>> mobile : +94 713068779
>>>>> <http://sanjeewamalalgoda.blogspot.com/>blog
>>>>> :http://sanjeewamalalgoda.blogspot.com/<http://sanjeewamalalgoda.blogspot.com/>
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> --
>>>> Thilini Ishaka
>>>>
>>>>
>>>
>>>
>>> --
>>> *Sanjeewa Malalgoda*
>>> Mobile : +94 713068779
>>> Mobile : +14084122715
>>>
>>> <http://sanjeewamalalgoda.blogspot.com/>blog
>>> :http://sanjeewamalalgoda.blogspot.com/<http://sanjeewamalalgoda.blogspot.com/>
>>>
>>
>>
>>
>> --
>> --
>> Thilini Ishaka
>>
>>
>
>
> --
> *Sanjeewa Malalgoda*
> mobile : +94 713068779
> <http://sanjeewamalalgoda.blogspot.com/>blog
> :http://sanjeewamalalgoda.blogspot.com/<http://sanjeewamalalgoda.blogspot.com/>
>
> _______________________________________________
> Dev mailing list
> Dev@wso2.org
> http://wso2.org/cgi-bin/mailman/listinfo/dev
>
>
_______________________________________________
Dev mailing list
Dev@wso2.org
http://wso2.org/cgi-bin/mailman/listinfo/dev
