Hi Shavantha,

You'll only need above configurations when incremental processing is
enabled. However you don't need to edit those values by hand, instead
puppet should automatically configure it for you.

Please raise a JIRA for this. Will fix it.

Regards,
Dunith



On Tue, Nov 4, 2014 at 10:40 PM, Dunith Dhanushka <[email protected]> wrote:

> Hi Aparna,
>
> Issue 1 - Failed in in the first time and succeeded in the 2nd attempt.
>
> Puppet script uses wget command to fetch Cassandra distribution from the
> specified remote location. This operation might take some time depending on
> the network. Above situation could happen if the Cassandra distribution was
> not fully downloaded and Puppet script tries to continue with partially
> downloaded distribution. Not sure this is specific to our research cloud
> environment. I'll check on this further.
>
> *Issue 2* - Temporarily  copied files
> This might be due to issue #1, partial download of a distribution file.
>
> Yes, I'll make a note about user 'kurumba' in the documentation.
>
> Regards,
> Dunith
>
>
>
>
> On Tue, Nov 4, 2014 at 9:38 PM, Shavantha Weerasinghe <[email protected]>
> wrote:
>
>> Hi Dunith
>>
>> within the puppet scrips for receive/analyzer nodes hive-site.xml are we
>> to change the user name/password and host values
>>
>>    <property>
>>
>> <name>hive.incremental.processing.intermediate.results.cassandra.hosts</name>
>>     <value>localhost:9160</value>
>>   </property>
>>
>>    <property>
>>
>> <name>hive.incremental.processing.intermediate.results.cassandra.userName</name>
>>     <value>admin</value>
>>   </property>
>>
>>    <property>
>>
>> <name>hive.incremental.processing.intermediate.results.cassandra.password</name>
>>     <value>admin</value>
>>   </property>
>>
>>
>> Shavantha Weerasinghe
>> Senior Software Engineer QA
>> WSO2, Inc.
>> lean.enterprise.middleware.
>> http://wso2.com
>> http://wso2.org
>> Tel : 94 11 214 5345
>> Fax :94 11 2145300
>>
>>
>> On Mon, Nov 3, 2014 at 6:12 PM, Dunith Dhanushka <[email protected]> wrote:
>>
>>> Hi ,
>>>
>>> Please note that when setting this up in the research cloud, turn off
>>> the iptables by '*sudo service iptables stop*'. Otherwise it'll block
>>> internode communications.
>>>
>>> Regards,
>>> Dunith
>>>
>>> On Mon, Nov 3, 2014 at 11:53 AM, Dunith Dhanushka <[email protected]>
>>> wrote:
>>>
>>>> Hi Aparna,
>>>>
>>>> I have completed the puppet script upgrade for puppet version 3.7 and
>>>> tested them on a Centos cluster. Please find the attached guide for setup
>>>> instructions.
>>>>
>>>>
>>>> Regards,
>>>> Dunith
>>>> ​
>>>>  BAM 2.5.0 Distributed Setup with Puppet 3.7
>>>> <https://docs.google.com/a/wso2.com/document/d/1-BfLkgk6xDD-sd11xBbW5I0ZQodwUE1WuUUEl1nwAK4/edit?usp=drive_web>
>>>> ​
>>>>
>>>> On Wed, Oct 29, 2014 at 11:58 AM, Dunith Dhanushka <[email protected]>
>>>> wrote:
>>>>
>>>>> Hi Aparna,
>>>>>
>>>>> I have completed the scripts for BAM and Cassandra nodes. But still
>>>>> need to work on Hadoop scripts. I have started testing them on the centos
>>>>> cluster created in the research cloud.
>>>>>
>>>>> Hopefully by today EOD I'll be able to finish  testing with full BAM
>>>>> cluster.
>>>>>
>>>>>
>>>>> Regards,
>>>>> Dunith
>>>>>
>>>>>
>>>>> On Wed, Oct 29, 2014 at 11:40 AM, Aparna Karunarathna <[email protected]
>>>>> > wrote:
>>>>>
>>>>>> Hi Dunith,
>>>>>>
>>>>>> Any update on puppet scripts?
>>>>>>
>>>>>> Regards,
>>>>>> Aparna.
>>>>>>
>>>>>> On Mon, Oct 27, 2014 at 10:42 AM, Sewmini Jayaweera <[email protected]
>>>>>> > wrote:
>>>>>>
>>>>>>> Hi Aparna,
>>>>>>>
>>>>>>> I tested following issues,
>>>>>>>
>>>>>>> [1] https://wso2.org/jira/browse/BAM-1611
>>>>>>> [2] https://wso2.org/jira/browse/BAM-1515
>>>>>>> [3] https://redmine.wso2.com/issues/3186
>>>>>>>
>>>>>>> Issue [1] and [2] were fixed.
>>>>>>>
>>>>>>> in order to test issue [3] I created an email adaptor and when
>>>>>>> sending a email contains text as e-mail body got following error
>>>>>>>
>>>>>>>  [2014-10-27 10:23:36,317]  INFO
>>>>>>> {org.apache.axis2.builder.BuilderUtil} -  OMException in getSOAPBuilder
>>>>>>> org.apache.axiom.om.OMException:
>>>>>>> com.ctc.wstx.exc.WstxUnexpectedCharException: Unexpected character 'm'
>>>>>>> (code 109) in prolog; expected '<'
>>>>>>>  at [row,col {unknown-source}]: [1,1]
>>>>>>> at
>>>>>>> org.apache.axiom.om.impl.builder.StAXOMBuilder.next(StAXOMBuilder.java:296)
>>>>>>> at
>>>>>>> org.apache.axiom.soap.impl.builder.StAXSOAPModelBuilder.getSOAPEnvelope(StAXSOAPModelBuilder.java:204)
>>>>>>> at java.lang.Thread.run(Thread.java:745)
>>>>>>>
>>>>>>> Similar issue is being reported by Shavantha -
>>>>>>> https://wso2.org/jira/browse/BAM-1830
>>>>>>>
>>>>>>> Thank You.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Sewmini Jayaweera
>>>>>>> *Software Engineer - QA Team*
>>>>>>> Mobile: +94 (0) 773 381 250
>>>>>>> [email protected]
>>>>>>>
>>>>>>> On Fri, Oct 24, 2014 at 5:52 PM, Shavantha Weerasinghe <
>>>>>>> [email protected]> wrote:
>>>>>>>
>>>>>>>> Hi Inosh
>>>>>>>>
>>>>>>>> When we create a stream the payload is generated in xml format as
>>>>>>>> below[1] however, when the email is sent with this in the body the BAM
>>>>>>>> throws an exception "INFO {org.apache.axis2.builder.BuilderUtil} -
>>>>>>>> OMException in getSOAPBuilder
>>>>>>>> org.apache.axiom.soap.SOAPProcessingException: First Element must
>>>>>>>> contain the local name, Envelope , but found events". If we send the
>>>>>>>> payload on email as [2] the exception is not thrown. Is this the 
>>>>>>>> expected
>>>>>>>> behaviour
>>>>>>>>
>>>>>>>> [1] system generated payload
>>>>>>>> <events>
>>>>>>>>     <event>
>>>>>>>>         <metaData>
>>>>>>>>             <tenant_id>45</tenant_id>
>>>>>>>>             <http_method>data1</http_method>
>>>>>>>>             <character_set_encoding>data4</character_set_encoding>
>>>>>>>>             <remote_address>data4</remote_address>
>>>>>>>>             <transport_in_url>data2</transport_in_url>
>>>>>>>>             <message_type>data3</message_type>
>>>>>>>>             <remote_host>data1</remote_host>
>>>>>>>>             <service_prefix>data3</service_prefix>
>>>>>>>>             <host>data2</host>
>>>>>>>>         </metaData>
>>>>>>>>         <correlationData>
>>>>>>>>             <activity_id>data5</activity_id>
>>>>>>>>         </correlationData>
>>>>>>>>         <payloadData>
>>>>>>>>             <message_direction>data5</message_direction>
>>>>>>>>             <service_name>data3</service_name>
>>>>>>>>             <operation_name>data4</operation_name>
>>>>>>>>             <message_id>data1</message_id>
>>>>>>>>             <timestamp>645565</timestamp>
>>>>>>>>         </payloadData>
>>>>>>>>     </event>
>>>>>>>> </events>
>>>>>>>>
>>>>>>>> [2] with soap envelope
>>>>>>>> <soap:Envelope xmlns:soap="http://www.w3.org/2003/05/soap-envelope";
>>>>>>>> xmlns:ser="http://services.samples";
>>>>>>>> xmlns:xsd="http://services.samples/xsd";>
>>>>>>>> <soap:Header/>
>>>>>>>> <soap:Body>
>>>>>>>> <events>
>>>>>>>>     <event>
>>>>>>>>         <metaData>
>>>>>>>>             <tenant_id>100</tenant_id>
>>>>>>>>             <http_method>data3</http_
>>>>>>>> method>
>>>>>>>>             <character_set_encoding>data5<
>>>>>>>> /character_set_encoding>
>>>>>>>>             <remote_address>data5</remote_
>>>>>>>> address>
>>>>>>>>             <transport_in_url>data3</transport_in_url>
>>>>>>>>             <message_type>data1</message_type>
>>>>>>>>             <remote_host>data2</remote_host>
>>>>>>>>             <service_prefix>data4</service_prefix>
>>>>>>>>             <host>data1</host>
>>>>>>>>         </metaData>
>>>>>>>>         <correlationData>
>>>>>>>>             <activity_id>data2</activity_id>
>>>>>>>>         </correlationData>
>>>>>>>>         <payloadData>
>>>>>>>>             <message_direction>data3</message_direction>
>>>>>>>>             <service_name>data1</service_name>
>>>>>>>>             <operation_name>data1</operation_name>
>>>>>>>>             <message_id>data4</message_id>
>>>>>>>>             <timestamp>323232</timestamp>
>>>>>>>>         </payloadData>
>>>>>>>>     </event>
>>>>>>>> </events>
>>>>>>>> </soap:Body>
>>>>>>>> </soap:Envelope>
>>>>>>>>
>>>>>>>>
>>>>>>>> Shavantha Weerasinghe
>>>>>>>> Senior Software Engineer QA
>>>>>>>> WSO2, Inc.
>>>>>>>> lean.enterprise.middleware.
>>>>>>>> http://wso2.com
>>>>>>>> http://wso2.org
>>>>>>>> Tel : 94 11 214 5345
>>>>>>>> Fax :94 11 2145300
>>>>>>>>
>>>>>>>>
>>>>>>>> On Thu, Oct 23, 2014 at 2:10 PM, Shavantha Weerasinghe <
>>>>>>>> [email protected]> wrote:
>>>>>>>>
>>>>>>>>> Hi Aparna/Asanthi
>>>>>>>>>
>>>>>>>>> Hi Guys
>>>>>>>>>
>>>>>>>>> The attachment on google drive has all that is needed to try MQTT
>>>>>>>>> flow
>>>>>>>>>
>>>>>>>>> regards,​
>>>>>>>>>  mqttex.zip
>>>>>>>>> <https://docs.google.com/a/wso2.com/file/d/0B3pVKBDCKX9lYTgxcXM2QlFDMEE/edit?usp=drive_web>
>>>>>>>>> ​
>>>>>>>>>
>>>>>>>>> Shavantha Weerasinghe
>>>>>>>>> Senior Software Engineer QA
>>>>>>>>> WSO2, Inc.
>>>>>>>>> lean.enterprise.middleware.
>>>>>>>>> http://wso2.com
>>>>>>>>> http://wso2.org
>>>>>>>>> Tel : 94 11 214 5345
>>>>>>>>> Fax :94 11 2145300
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Wed, Oct 22, 2014 at 3:12 PM, Anjana Fernando <[email protected]>
>>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>>> Hi Aparna,
>>>>>>>>>>
>>>>>>>>>> First, use the versions by default mentioned in the puppet setup.
>>>>>>>>>> Then after that, you can move into Apache Cassandra 2.0.x and DSE 
>>>>>>>>>> Cassandra
>>>>>>>>>> 2.0 based one. Hadoop use the same mentioned in the puppet setup, 
>>>>>>>>>> that is
>>>>>>>>>> the stable v1 version.
>>>>>>>>>>
>>>>>>>>>> Cheers,
>>>>>>>>>> Anjana.
>>>>>>>>>>
>>>>>>>>>> On Wed, Oct 22, 2014 at 11:40 AM, Aparna Karunarathna <
>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>
>>>>>>>>>>> Hi Anjana,
>>>>>>>>>>>
>>>>>>>>>>> As we discussed(Anjana, Evanthika & myself), due to the limited
>>>>>>>>>>> time frame we have to prioritize the testing scope. BAM Cluster 
>>>>>>>>>>> should be
>>>>>>>>>>> configured using puppet scripts. Therefore can you please specify 
>>>>>>>>>>> the exact
>>>>>>>>>>> Cassandra & hadoop versions to test.
>>>>>>>>>>>
>>>>>>>>>>> Regards,
>>>>>>>>>>> Aparna.
>>>>>>>>>>>
>>>>>>>>>>> On Wed, Oct 22, 2014 at 11:26 AM, Asanthi Kulasinghe <
>>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Hi,
>>>>>>>>>>>>
>>>>>>>>>>>> Can we please have a p2 repo to be used for this?
>>>>>>>>>>>>
>>>>>>>>>>>> Regards
>>>>>>>>>>>> Asanthi
>>>>>>>>>>>>
>>>>>>>>>>>> On Tue, Oct 21, 2014 at 8:39 PM, Shavantha Weerasinghe <
>>>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Hi Aparna
>>>>>>>>>>>>>
>>>>>>>>>>>>> I have started work on the test scenarios for feature ID#3186
>>>>>>>>>>>>> related to Multiple Transport/Data Format Support in BAM
>>>>>>>>>>>>>
>>>>>>>>>>>>> regards,
>>>>>>>>>>>>>
>>>>>>>>>>>>> Shavantha Weerasinghe
>>>>>>>>>>>>> Senior Software Engineer QA
>>>>>>>>>>>>> WSO2, Inc.
>>>>>>>>>>>>> lean.enterprise.middleware.
>>>>>>>>>>>>> http://wso2.com
>>>>>>>>>>>>> http://wso2.org
>>>>>>>>>>>>> Tel : 94 11 214 5345
>>>>>>>>>>>>> Fax :94 11 2145300
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Tue, Oct 21, 2014 at 2:24 PM, Yasith Tharindu <
>>>>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Given access to the nominated people.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Mon, Oct 20, 2014 at 5:19 PM, Evanthika Amarasiri <
>>>>>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi Yasith,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> It would be great if we you can grant us access to the QA
>>>>>>>>>>>>>>> cloud asap since we need to start setting up the environments 
>>>>>>>>>>>>>>> and start
>>>>>>>>>>>>>>> testing the products. The release is on the 24th (Oct).
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>>> Evanthika
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Mon, Oct 20, 2014 at 5:15 PM, Rasanjaya Subasinghe <
>>>>>>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> The new setup is almost configured and  linux bases images
>>>>>>>>>>>>>>>> are already uploaded and tested.And newly system can be 
>>>>>>>>>>>>>>>> accessible by OT
>>>>>>>>>>>>>>>> credentials. But before gain access to the private cloud you 
>>>>>>>>>>>>>>>> need to ask
>>>>>>>>>>>>>>>> yasith to enable the user credentials.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Thank you.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>> ~Thanks
>>>>>>>>>>>>>> Yasith Tharindu,*WSO2 Inc,*
>>>>>>>>>>>>>> Blog : http://www.yasith.info
>>>>>>>>>>>>>> Twitter : http://twitter.com/yasithnd
>>>>>>>>>>>>>> LinkedIn : http://www.linkedin.com/in/yasithnd
>>>>>>>>>>>>>> GPG  ID : *57CEE66E*
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> *US : +1 (408) 754-7388 <%28408%29%20754-7388> - 51926*
>>>>>>>>>>>>>> *LK : +94 (011) 214 5345 - 1005739*
>>>>>>>>>>>>>> "' lean "' enterprise '" middleware '" http://wso2.com
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>> *Asanthi Kulasinghe*
>>>>>>>>>>>> WSO2 Inc; http://www.wso2.com/.
>>>>>>>>>>>> Mobile: +94777355522
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> *Aparna Karunarathna.*
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> *Senior Software Engineer - QAWSO2 Inc.Mobile: 0714002533
>>>>>>>>>>> <0714002533>*
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> *Anjana Fernando*
>>>>>>>>>> Senior Technical Lead
>>>>>>>>>> WSO2 Inc. | http://wso2.com
>>>>>>>>>> lean . enterprise . middleware
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> *Aparna Karunarathna.*
>>>>>>
>>>>>>
>>>>>> *Senior Software Engineer - QAWSO2 Inc.Mobile: 0714002533*
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Regards,
>>>>>
>>>>> Dunith Dhanushka,
>>>>> Senior Software Engineer - BAM,
>>>>> WSO2 Inc,
>>>>>
>>>>> Mobile - +94 71 8615744
>>>>> Blog - dunithd.wordpress.com <http://blog.dunith.com>
>>>>> Twitter - @dunithd <http://twitter.com/dunithd>
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> Regards,
>>>>
>>>> Dunith Dhanushka,
>>>> Senior Software Engineer - BAM,
>>>> WSO2 Inc,
>>>>
>>>> Mobile - +94 71 8615744
>>>> Blog - dunithd.wordpress.com <http://blog.dunith.com>
>>>> Twitter - @dunithd <http://twitter.com/dunithd>
>>>>
>>>
>>>
>>>
>>> --
>>> Regards,
>>>
>>> Dunith Dhanushka,
>>> Senior Software Engineer - BAM,
>>> WSO2 Inc,
>>>
>>> Mobile - +94 71 8615744
>>> Blog - dunithd.wordpress.com <http://blog.dunith.com>
>>> Twitter - @dunithd <http://twitter.com/dunithd>
>>>
>>
>>
>
>
> --
> Regards,
>
> Dunith Dhanushka,
> Senior Software Engineer - BAM,
> WSO2 Inc,
>
> Mobile - +94 71 8615744
> Blog - dunithd.wordpress.com <http://blog.dunith.com>
> Twitter - @dunithd <http://twitter.com/dunithd>
>



-- 
Regards,

Dunith Dhanushka,
Senior Software Engineer - BAM,
WSO2 Inc,

Mobile - +94 71 8615744
Blog - dunithd.wordpress.com <http://blog.dunith.com>
Twitter - @dunithd <http://twitter.com/dunithd>
_______________________________________________
Dev mailing list
[email protected]
http://wso2.org/cgi-bin/mailman/listinfo/dev

Reply via email to