Remove non-ASCII characters from comments in source files. These are preventing the build tool from generating report files on Linux systems.
Cc: Zailiang Sun <zailiang....@intel.com> Cc: Yi Qian <yi.q...@intel.com> Cc: Gary Lin <g...@suse.com> Signed-off-by: Michael D Kinney <michael.d.kin...@intel.com> --- .../Intel/Vlv2TbltDevicePkg/PlatformInitPei/PchInitPeim.c | 2 +- Platform/Intel/Vlv2TbltDevicePkg/PlatformPei/BootMode.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/Platform/Intel/Vlv2TbltDevicePkg/PlatformInitPei/PchInitPeim.c b/Platform/Intel/Vlv2TbltDevicePkg/PlatformInitPei/PchInitPeim.c index 4a51a47e36..71d6cb7c15 100644 --- a/Platform/Intel/Vlv2TbltDevicePkg/PlatformInitPei/PchInitPeim.c +++ b/Platform/Intel/Vlv2TbltDevicePkg/PlatformInitPei/PchInitPeim.c @@ -461,7 +461,7 @@ UARTInit ( if (SystemConfiguration->LpssHsuart0Enabled == 1){ // //Valleyview BIOS Specification Vol2,17.2 - //LPSS_UART1 �C set each pad PAD_CONF0.Func_Pin_Mux to function 1: + //LPSS_UART1 C set each pad PAD_CONF0.Func_Pin_Mux to function 1: // MmioAnd8 (IO_BASE_ADDRESS + 0x0090, (UINT8)~0x07); MmioOr8 (IO_BASE_ADDRESS + 0x0090, 0x01); diff --git a/Platform/Intel/Vlv2TbltDevicePkg/PlatformPei/BootMode.c b/Platform/Intel/Vlv2TbltDevicePkg/PlatformPei/BootMode.c index 4c0e660b7f..2061b8d559 100644 --- a/Platform/Intel/Vlv2TbltDevicePkg/PlatformPei/BootMode.c +++ b/Platform/Intel/Vlv2TbltDevicePkg/PlatformPei/BootMode.c @@ -205,9 +205,9 @@ GetSleepTypeAfterWakeup ( // VLV BIOS Specification 0.6.2 - Section 18.4, "Power Failure Consideration" // // When the SUS_PWR_FLR bit is set, it indicates the SUS well power is lost. - // This bit is in the SUS Well and defaults to 1�b1 based on RSMRST# assertion (not cleared by any type of reset). + // This bit is in the SUS Well and defaults to 1'b1 based on RSMRST# assertion (not cleared by any type of reset). // System BIOS should follow cold boot path if SUS_PWR_FLR (PBASE + 0x20[14]), - // GEN_RST_STS (PBASE + 0x20[9]) or PWRBTNOR_STS (ABASE + 0x00[11]) is set to 1�b1 + // GEN_RST_STS (PBASE + 0x20[9]) or PWRBTNOR_STS (ABASE + 0x00[11]) is set to 1'b1 // regardless of the value in the SLP_TYP (ABASE + 0x04[12:10]) field. // GenPmCon1 = MmioRead16 (PMC_BASE_ADDRESS + R_PCH_PMC_GEN_PMCON_1); -- 2.21.0.windows.1 -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#44173): https://edk2.groups.io/g/devel/message/44173 Mute This Topic: https://groups.io/mt/32564740/21656 Group Owner: devel+ow...@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-