Hi Laszlo
May I know if you want to support legacy BIOS?
The legacy BIOS memory map is reported in E820, which is different with UEFI
memory map.
In OvmfPkg\Csm\LegacyBiosDxe\LegacyBootSupport.c, LegacyBiosBuildE820() will
hardcode below 640K address to be OS usage without consulting UEFI memory map.
//
// First entry is 0 to (640k - EBDA)
//
ACCESS_PAGE0_CODE (
E820Table[0].BaseAddr = 0;
E820Table[0].Length = (UINT64) ((*(UINT16 *) (UINTN)0x40E) << 4);
E820Table[0].Type = EfiAcpiAddressRangeMemory;
);
If we want to support this feature in legacy BIOS, we also need reserve the
black hole here.
Thank you
Yao Jiewen
> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Laszlo Ersek
> Sent: Tuesday, September 24, 2019 7:35 PM
> To: edk2-devel-groups-io <devel@edk2.groups.io>
> Cc: Ard Biesheuvel <ard.biesheu...@linaro.org>; Boris Ostrovsky
> <boris.ostrov...@oracle.com>; Brijesh Singh <brijesh.si...@amd.com>; Igor
> Mammedov <imamm...@redhat.com>; Yao, Jiewen <jiewen....@intel.com>;
> Joao M Martins <joao.m.mart...@oracle.com>; Justen, Jordan L
> <jordan.l.jus...@intel.com>; Nakajima, Jun <jun.nakaj...@intel.com>; Kinney,
> Michael D <michael.d.kin...@intel.com>; Paolo Bonzini
> <pbonz...@redhat.com>; Phillip Goerl <phillip.go...@oracle.com>; Chen,
> Yingwen <yingwen.c...@intel.com>
> Subject: [edk2-devel] [PATCH wave 1 00/10] support QEMU's "SMRAM at
> default SMBASE" feature
>
> Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
> Repo: https://github.com/lersek/edk2.git
> Branch: smram_at_default_smbase_bz_1512_wave_1
>
> This is the firmware-side patch series for the QEMU feature that Igor is
> proposing in
>
> [Qemu-devel] [PATCH 0/2]
> q35: mch: allow to lock down 128K RAM at default SMBASE address
>
> posted at
>
> http://mid.mail-archive.com/20190917130708.10281-1-
> imamm...@redhat.com
> https://lists.gnu.org/archive/html/qemu-devel/2019-09/msg03538.html
> https://edk2.groups.io/g/devel/message/47364
>
> This OVMF patch series is supposed to be the first "wave" of patch sets,
> working towards VCPU hotplug with SMM enabled.
>
> We want the hot-plugged VCPU to execute its very first instruction from
> SMRAM, running in SMM, for protection from OS and PCI DMA interference.
> In the (long!) discussion at
>
> 20190905174503.2acaa46a@redhat.com">http://mid.mail-archive.com/20190905174503.2acaa46a@redhat.com
> https://edk2.groups.io/g/devel/message/46910
> https://bugzilla.tianocore.org/show_bug.cgi?id=1512#c9
>
> we considered diverging from the specs and changing the default SMBASE
> to an address different from 0x3_0000, so that it would point into
> SMRAM. However, Igor had the idea to keep the default SMBASE intact, and
> replace the underlying system RAM (128 KB of it) with lockable SMRAM.
> This conforms to the language of the Intel SDM, namely, "[t]he actual
> physical location of the SMRAM can be in system memory or in a separate
> RAM memory". When firmware locks this QEMU-specific SMRAM, the latter
> completely disappears from the address space of code that runs outside
> of SMM (including PCI devices doing DMA). We call the remaining MMIO
> area a "black hole".
>
> The present patch set detects the QEMU feature, locks the SMRAM at the
> right times, and informs firmware and OS components to stay away form
> the SMRAM at the default SMBASE.
>
> I've tested the set extensively:
>
> http://mid.mail-archive.com/c18f1ada-3eca-d5f1-da4f-
> e74181c5a...@redhat.com
> https://edk2.groups.io/g/devel/message/47864
>
> Going forward, if I understand correctly, the plan is to populate the
> new SMRAM with the hotplug SMI handler. (This would likely be put in
> place by OvmfPkg/PlatformPei, from NASM source code. The
> SmmRelocateBases() function in UefiCpuPkg/PiSmmCpuDxeSmm backs up the
> original contents before, and restores them after, the initial SMBASE
> relocation of the cold-plugged VCPUs. Thus the hotplug SMI handler would
> survive the initial relocation of the cold-plugged VCPUs.)
>
> Further, when a VCPU is hot-plugged, we seem to intend to raise an SMI
> for it (perhaps internally to QEMU?), which will remain pending until
> the VCPU is launched with INIT-SIPI-SIPI. Once the INIT-SIPI-SIPI is
> sent, the VCPU will immediately enter SMM, and run the SMI handler in
> the locked SMRAM at the default SMBASE. At RSM, it may continue at the
> vector requested in the INIT-SIPI-SIPI.
>
> Cc: Ard Biesheuvel <ard.biesheu...@linaro.org>
> Cc: Boris Ostrovsky <boris.ostrov...@oracle.com>
> Cc: Brijesh Singh <brijesh.si...@amd.com>
> Cc: Igor Mammedov <imamm...@redhat.com>
> Cc: Jiewen Yao <jiewen....@intel.com>
> Cc: Joao M Martins <joao.m.mart...@oracle.com>
> Cc: Jordan Justen <jordan.l.jus...@intel.com>
> Cc: Jun Nakajima <jun.nakaj...@intel.com>
> Cc: Michael Kinney <michael.d.kin...@intel.com>
> Cc: Paolo Bonzini <pbonz...@redhat.com>
> Cc: Phillip Goerl <phillip.go...@oracle.com>
> Cc: Yingwen Chen <yingwen.c...@intel.com>
>
> Thanks
> Laszlo
>
> Laszlo Ersek (10):
> OvmfPkg: introduce PcdQ35SmramAtDefaultSmbase
> OvmfPkg/IndustryStandard: increase vertical whitespace in Q35 macro
> defs
> OvmfPkg/IndustryStandard: add MCH_DEFAULT_SMBASE* register macros
> OvmfPkg/PlatformPei: factor out Q35BoardVerification()
> OvmfPkg/PlatformPei: detect SMRAM at default SMBASE (skeleton)
> OvmfPkg/PlatformPei: assert there's no permanent PEI RAM at default
> SMBASE
> OvmfPkg/PlatformPei: reserve the SMRAM at the default SMBASE, if it
> exists
> OvmfPkg/SEV: don't manage the lifecycle of the SMRAM at the default
> SMBASE
> OvmfPkg/SmmAccess: close and lock SMRAM at default SMBASE
> OvmfPkg/PlatformPei: detect SMRAM at default SMBASE (for real)
>
> OvmfPkg/Include/IndustryStandard/Q35MchIch9.h | 106 +++++++++++----
> -----
> OvmfPkg/Library/SmmCpuFeaturesLib/SmmCpuFeaturesLib.c | 21 +++-
> OvmfPkg/Library/SmmCpuFeaturesLib/SmmCpuFeaturesLib.inf | 4 +
> OvmfPkg/OvmfPkg.dec | 6 ++
> OvmfPkg/OvmfPkgIa32.dsc | 1 +
> OvmfPkg/OvmfPkgIa32X64.dsc | 1 +
> OvmfPkg/OvmfPkgX64.dsc | 1 +
> OvmfPkg/PlatformPei/AmdSev.c | 24 ++++-
> OvmfPkg/PlatformPei/MemDetect.c | 87
> +++++++++++++---
> OvmfPkg/PlatformPei/Platform.c | 24 +++++
> OvmfPkg/PlatformPei/Platform.h | 7 ++
> OvmfPkg/PlatformPei/PlatformPei.inf | 1 +
> OvmfPkg/SmmAccess/SmmAccess2Dxe.c | 7 ++
> OvmfPkg/SmmAccess/SmmAccess2Dxe.inf | 1 +
> OvmfPkg/SmmAccess/SmmAccessPei.c | 6 ++
> OvmfPkg/SmmAccess/SmmAccessPei.inf | 1 +
> OvmfPkg/SmmAccess/SmramInternal.c | 25 +++++
> OvmfPkg/SmmAccess/SmramInternal.h | 8 ++
> 18 files changed, 260 insertions(+), 71 deletions(-)
>
> --
> 2.19.1.3.g30247aa5d201
>
>
> -=-=-=-=-=-=
> Groups.io Links: You receive all messages sent to this group.
>
> View/Reply Online (#47924): https://edk2.groups.io/g/devel/message/47924
> Mute This Topic: https://groups.io/mt/34274934/1772286
> Group Owner: devel+ow...@edk2.groups.io
> Unsubscribe: https://edk2.groups.io/g/devel/unsub [jiewen....@intel.com]
> -=-=-=-=-=-=
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#48082): https://edk2.groups.io/g/devel/message/48082
Mute This Topic: https://groups.io/mt/34274934/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
