Hi I have an issue while porting a new platform to EDK2. After porting the Stratix 10 platform (ARM) to EDK2 it works correctly. However, when I tried to add more INF to the FDF file, it failed to decompress the image during boot time, log as below INFO: DDR: DRAM calibration success. INFO: Scrubbing ECC INFO: Init HPS NOC's DDR Scheduler. NOTICE: BL2: v2.1(debug):v2.1-15-g5880144-dirty NOTICE: BL2: Built : 14:02:01, Aug 22 2019 INFO: BL2: Doing platform setup INFO: BL2: Loading image id 3 INFO: Loading image id=3 at address 0xffe1c000 INFO: Image id=3 loaded: 0xffe1c000 - 0xffe22019 INFO: BL2: Loading image id 5 INFO: Loading image id=5 at address 0x50000 INFO: Image id=5 loaded: 0x50000 - 0x150000 NOTICE: BL2: Booting BL31 INFO: Entry point address = 0xffe1c000 INFO: SPSR = 0x3cd NOTICE: BL31: v2.1(release):v2.1-604-g3441952 NOTICE: BL31: Built : 15:32:55, Sep 25 2019 UEFI firmware (version 1.0 built at 15:15:26 on Sep 26 2019) Decompress Failed - Invalid Parameter
ASSERT_EFI_ERROR (Status = Not Found) ASSERT [ArmPlatformPrePiUniCore] /nfs/png/disks/swuser_work_thloh/push/build/edk2/ArmPlatformPkg/PrePi/PrePi.c(151): !EFI_ERROR (Status) This happens if I add more items to the image, and if I reduce the size of the image, it works correctly again. This could be a clue to what could've gone wrong. Does anyone have any ideas what might've gone wrong? I traced the decompression to LzmaDecode, and got lost in the code there. Thanks! -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#48085): https://edk2.groups.io/g/devel/message/48085 Mute This Topic: https://groups.io/mt/34296776/21656 Group Owner: devel+ow...@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
