Set the default value of PcdAcpiExposedTableVersions for Aarch64 platforms to 0x20. Previously, the default was set to 0x3E for all platforms. The new value removes ACPI 1.0b compatability, which forces the use of XSDT 64-bit pointer, as required by Arm SBBR specification. This also resolves an error reported by acpiview command, as seen on the RPi (see https://github.com/pftf/RPi4/issues/25).
Cc: Dandan Bi <dandan...@intel.com> Cc: Liming Gao <liming....@intel.com> Cc: Hao A Wu <hao.a...@intel.com> Cc: Leif Lindholm <l...@nuviainc.com> Cc: Ard Biesheuvel <ard.biesheu...@linaro.org> Signed-off-by: Samer El-Haj-Mahmoud <sa...@elhajmahmoud.com> --- MdeModulePkg/MdeModulePkg.dec | 3 +++ 1 file changed, 3 insertions(+) diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec index 91a3c608231c..027f444903ef 100644 --- a/MdeModulePkg/MdeModulePkg.dec +++ b/MdeModulePkg/MdeModulePkg.dec @@ -1549,6 +1549,9 @@ [PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx] # @Prompt Console Output Row of Text Setup gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutRow|25|UINT32|0x4000000e +[PcdsFixedAtBuild.AARCH64, PcdsPatchableInModule.AARCH64] + gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiExposedTableVersions|0x20|UINT32|0x0001004c + [PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx] ## UART clock frequency is for the baud rate configuration. # @Prompt Serial Port Clock Rate. -- 2.17.1 -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#56080): https://edk2.groups.io/g/devel/message/56080 Mute This Topic: https://groups.io/mt/72475924/21656 Group Owner: devel+ow...@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
