[ This v2 patch set aggregates all the doc changes and separates out functionality fixes into separate patches, based on Ard's feedback ]
This is a patch set which brings in Pi 2B (v1.2), Pi 3A+ and CM3 support. Most of this is documentation, and where there was some overlap I touched up RPi4 readme as well. Pi 2B v1.2 is actually a Pi 3 SoC tacked to a Pi 2 board. We can treat it as a WiFi- and BT- less variant of the Pi 3, that happens to run slower due to worse thermal design off the Pi 2 board. Pi 3A+ is the 512MB variant that dispenses with the USB/NIC hub. CM3 is the eMMC-bearing compute module variant, thus there is a MmcDxe fix to an MMC-only regression I introduced years ago. CM3L will probably just work (since it relies on uSD), but I don't have one to test with. Andrei Warkentin (4): RPi3: support Pi 2B v1.2. RPi: fix MmcTransferBlock (writes) regression for eMMC RPi: update HII strings in ConfigDxe to reflect eMMC support RPi: document CM3, Pi 2B (v1.2) and Pi 3A+ support, update Pi 4 docs .../RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c | 4 +- .../Drivers/ConfigDxe/ConfigDxeHii.uni | 8 +-- .../RaspberryPi/Drivers/MmcDxe/MmcBlockIo.c | 1 + Platform/RaspberryPi/RPi3/Readme.md | 49 +++++++++++++------ Platform/RaspberryPi/RPi4/Readme.md | 35 +++++++++++-- 5 files changed, 72 insertions(+), 25 deletions(-) -- 2.17.1 -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#58419): https://edk2.groups.io/g/devel/message/58419 Mute This Topic: https://groups.io/mt/73371875/21656 Group Owner: [email protected] Unsubscribe: https://edk2.groups.io/g/devel/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
