From: Deepak Pandey <deepak.pan...@arm.com>
A slave error is generated when host accesses the config space of
non-available device or unimplemented function on a given bus. So
implement a Neoverse N1 SoC specific PciExpressLib library with a
workaround to return 0xffffffff for all such access.
This library is inherited from MdePkg/Library/BasePciExpressLib and
based on commit 9344f0921518 of that library in the tianocore/edk2
project.
In addition to this, the Neoverse N1 SoC has two other limitations which
affect the access to the PCIe root port:
1. ECAM space is not contiguous, root port ECAM (BDF = 0:0:0) is
isolated from rest of the downstream hierarchy ECAM space.
2. Root port ECAM space is not capable of 8bit/16bit writes.
This library includes workaround for these limitations as well.
Cc: Ard Biesheuvel <ard.biesheu...@arm.com>
Cc: Leif Lindholm <l...@nuviainc.com>
Signed-off-by: Pranav Madhu <pranav.ma...@arm.com>
---
Silicon/ARM/NeoverseN1Soc/NeoverseN1Soc.dec
| 4 +
Silicon/ARM/NeoverseN1Soc/Library/NeoverseN1SocPciExpressLib/PciExpressLib.inf
| 56 +
Silicon/ARM/NeoverseN1Soc/Library/NeoverseN1SocPciExpressLib/PciExpressLib.c
| 1589 ++++++++++++++++++++
3 files changed, 1649 insertions(+)
diff --git a/Silicon/ARM/NeoverseN1Soc/NeoverseN1Soc.dec
b/Silicon/ARM/NeoverseN1Soc/NeoverseN1Soc.dec
index dba49e6489c0..491806b81be9 100644
--- a/Silicon/ARM/NeoverseN1Soc/NeoverseN1Soc.dec
+++ b/Silicon/ARM/NeoverseN1Soc/NeoverseN1Soc.dec
@@ -25,3 +25,7 @@ [Guids.common]
[PcdsFixedAtBuild]
# Secondary DDR memory
gArmNeoverseN1SocTokenSpaceGuid.PcdDramBlock2Base|0|UINT64|0x00000001
+
+ #PCIe
+
gArmNeoverseN1SocTokenSpaceGuid.PcdPcieRootPortConfigBaseAddress|0x60000000|UINT32|0x00000002
+
gArmNeoverseN1SocTokenSpaceGuid.PcdPcieRootPortConfigBaseSize|0x00001000|UINT32|0x00000003
diff --git
a/Silicon/ARM/NeoverseN1Soc/Library/NeoverseN1SocPciExpressLib/PciExpressLib.inf
b/Silicon/ARM/NeoverseN1Soc/Library/NeoverseN1SocPciExpressLib/PciExpressLib.inf
new file mode 100644
index 000000000000..acb6fb62197f
--- /dev/null
+++
b/Silicon/ARM/NeoverseN1Soc/Library/NeoverseN1SocPciExpressLib/PciExpressLib.inf
@@ -0,0 +1,56 @@
+## @file
+# Instance of PCI Express Library using the 256 MB PCI Express MMIO window.
+#
+# PCI Express Library that uses the 256 MB PCI Express MMIO window to perform
+# PCI Configuration cycles. Layers on top of an I/O Library instance.
+#
+# Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.
+#
+# This library is inherited from MdePkg/Library/BasePciExpressLib. On
+# NeoverseN1 SoC, with the unmodified version of this library, a slave error
is
+# generated when host accesses the config space of a non-available device or
+# unimplemented function on a given bus. In order to resolve this for
+# NeoverseN1 SoC, a modified version of the MdePkg/Library/BasePciExpressLib
+# library is used. The modification includes a check to determine whether the
+# incoming PCI address can be safely accessed.
+#
+# In addition to this, the NeoverseN1 SoC has two other limitations which
+# affect the access to the PCIe root port:
+# 1. ECAM space is not contiguous, root port ECAM (BDF = 0:0:0) is isolated
+# from rest of the downstream hierarchy ECAM space.
+# 2. Root port ECAM space is not capable of 8bit/16bit writes.
+# This library includes workaround for these limitations as well.
+#
+# Copyright (c) 2020, ARM Limited. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x0001001A
+ BASE_NAME = BasePciExpressLib
+ FILE_GUID = b378dd06-de7f-4e8c-8fb0-5126adfb34bf
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = PciExpressLib
+
+[Sources]
+ PciExpressLib.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ Silicon/ARM/NeoverseN1Soc/NeoverseN1Soc.dec
+
+[FixedPcd]
+ gArmNeoverseN1SocTokenSpaceGuid.PcdPcieRootPortConfigBaseAddress
+ gArmNeoverseN1SocTokenSpaceGuid.PcdPcieRootPortConfigBaseSize
+
+[LibraryClasses]
+ BaseLib
+ DebugLib
+ IoLib
+ PcdLib
+
+[Pcd]
+ gEfiMdePkgTokenSpaceGuid.PcdPciExpressBaseAddress ## CONSUMES
diff --git
a/Silicon/ARM/NeoverseN1Soc/Library/NeoverseN1SocPciExpressLib/PciExpressLib.c
b/Silicon/ARM/NeoverseN1Soc/Library/NeoverseN1SocPciExpressLib/PciExpressLib.c
new file mode 100644
index 000000000000..95cb47383fc8
--- /dev/null
+++
b/Silicon/ARM/NeoverseN1Soc/Library/NeoverseN1SocPciExpressLib/PciExpressLib.c
@@ -0,0 +1,1589 @@
+/** @file
+ Functions in this library instance make use of MMIO functions in IoLib to
+ access memory mapped PCI configuration space.
+
+ All assertions for I/O operations are handled in MMIO functions in the IoLib
+ Library.
+
+ Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
+
+ On the NeoverseN1Soc, a slave error is generated when host accesses the
+ configuration space of non-available device or unimplemented function on a
+ given bus. So this library introduces a workaround using IsBdfValid(),
+ to return 0xFFFFFFFF for all such access.
+
+ In addition to this, the hardware has two other limitations which affect
+ access to the PCIe root port:
+ 1. ECAM space is not contiguous, root port ECAM (BDF = 0:0:0) is isolated
+ from rest of the downstream hierarchy ECAM space.
+ 2. Root port ECAM space is not capable of 8bit/16bit writes.
+ The description of the workarounds included for these limitations can
+ be found in the comments below.
+
+ Copyright (c) 2020, ARM Limited. All rights reserved.
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+
+#include <Base.h>
+
+#include <Library/BaseLib.h>
+#include <Library/PciExpressLib.h>
+#include <Library/IoLib.h>
+#include <Library/DebugLib.h>
+#include <Library/PcdLib.h>
+#include <NeoverseN1Soc.h>
+
+/**
+ Assert the validity of a PCI address. A valid PCI address should contain 1's
+ only in the low 28 bits.
+
+ @param A The address to validate.
+
+**/
+#define ASSERT_INVALID_PCI_ADDRESS(A) \
+ ASSERT (((A) & ~0xfffffff) == 0)
+
+/* Root port Entry, BDF Entries Count */
+#define BDF_TABLE_ENTRY_SIZE 4
+#define BDF_TABLE_HEADER_COUNT 2
+#define BDF_TABLE_HEADER_SIZE 8
+
+/* BDF table offsets for PCIe */
+#define PCIE_BDF_TABLE_OFFSET 0
+
+#define GET_BUS_NUM(Address) (((Address) >> 20) & 0x7F)
+#define GET_DEV_NUM(Address) (((Address) >> 15) & 0x1F)
+#define GET_FUNC_NUM(Address) (((Address) >> 12) & 0x07)
+#define GET_REG_NUM(Address) ((Address) & 0xFFF)
+
+/**
+ BDF Table structure : (Header + BDF Entries)
+ --------------------------------------------
+ [Offset 0x00] ROOT PORT ADDRESS
+ [Offset 0x04] BDF ENTRIES COUNT
+ [Offset 0x08] BDF ENTRY 0
+ [Offset 0x0C] BDF ENTRY 1
+ [Offset 0x10] BDF ENTRY 2
+ [Offset 0x14] BDF ENTRY 3
+ [Offset 0x18] BDF ENTRY 4
+ ...
+ [Offset 0x--] BDF ENTRY N
+ --------------------------------------------
+**/
+
+/**
+ Value returned for reads on configuration space of unimplemented
+ device functions.
+**/
+STATIC UINTN mDummyConfigData = 0xFFFFFFFF;
+
+/**
+ Registers a PCI device so PCI configuration registers may be accessed after
+ SetVirtualAddressMap().
+
+ Registers the PCI device specified by Address so all the PCI configuration
+ registers associated with that PCI device may be accessed after
SetVirtualAddressMap()
+ is called.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+
+ @param Address The address that encodes the PCI Bus, Device, Function and
+ Register.
+
+ @retval RETURN_SUCCESS The PCI device was registered for runtime
access.
+ @retval RETURN_UNSUPPORTED An attempt was made to call this function
+ after ExitBootServices().
+ @retval RETURN_UNSUPPORTED The resources required to access the PCI
device
+ at runtime could not be mapped.
+ @retval RETURN_OUT_OF_RESOURCES There are not enough resources available to
+ complete the registration.
+
+**/
+RETURN_STATUS
+EFIAPI
+PciExpressRegisterForRuntimeAccess (
+ IN UINTN Address
+ )
+{
+ ASSERT_INVALID_PCI_ADDRESS (Address);
+ return RETURN_UNSUPPORTED;
+}
+
+/**
+ Check if the requested PCI address can be safely accessed.
+
+ SCP performs the initial bus scan, prepares a table of valid BDF addresses
+ and shares them through non-trusted SRAM. This function validates if the
+ requested PCI address belongs to a valid BDF by checking the table of valid
+ entries. If not, this function will return false. This is a workaround to
+ avoid bus fault that occurs when accessing unavailable PCI device due to
+ hardware bug.
+
+ @param Address The address that encodes the PCI Bus, Device, Function and
+ Register.
+
+ @return TRUE BDF can be accessed, valid.
+ @return FALSE BDF should not be accessed, invalid.
+
+**/
+STATIC
+BOOLEAN
+IsBdfValid (
+ IN UINTN Address
+ )
+{
+ UINTN BdfCount;
+ UINTN BdfValue;
+ UINTN BdfEntry;
+ UINTN Count;
+ UINTN TableBase;
+ UINTN ConfigBase;
+
+ ConfigBase = Address & ~0xFFF;
+ TableBase = NEOVERSEN1SOC_NON_SECURE_SRAM_BASE + PCIE_BDF_TABLE_OFFSET;
+ BdfCount = MmioRead32 (TableBase + BDF_TABLE_ENTRY_SIZE);
+ BdfEntry = TableBase + BDF_TABLE_HEADER_SIZE;
+
+ /* Skip the header & check remaining entry */
+ for (Count = 0; Count < BdfCount; Count++, BdfEntry += BDF_TABLE_ENTRY_SIZE)
{
+ BdfValue = MmioRead32 (BdfEntry);
+ if (BdfValue == ConfigBase) {
+ return TRUE;
+ }
+ }
+
+ return FALSE;
+}
+
+/**
+ Get the physical address of a configuration space register.
+
+ Implement a workaround to avoid generation of slave errors from the bus.
That
+ is, retrieve the PCI Express Base Address via a PCD entry, add the incomming
+ address with that base address and check whether this converted address
+ points to a accessible BDF. If it is not accessible, return the address
+ of a dummy location so that a read from it does not cause a slave error.
+
+ In addition to this, implement a workaround for accessing the root port's
+ configuration space. The root port configuration space is not contiguous
+ with the rest of the downstream hierarchy configuration space. So determine
+ whether the specified address is for the root port and use a different base
+ address for it.
+
+ @param Address The address that encodes the PCI Bus, Device, Function and
+ Register.
+
+ @return Physical address of the configuration register that corresponds to
the
+ PCI configuration register specified by input parameter 'Address'.
+
+**/
+STATIC
+VOID*
+GetPciExpressAddress (
+ IN UINTN Address
+ )
+{
+ UINT8 Bus, Device, Function;
+ UINTN ConfigAddress;
+
+ Bus = GET_BUS_NUM (Address);
+ Device = GET_DEV_NUM (Address);
+ Function = GET_FUNC_NUM (Address);
+
+ if ((Bus == 0) && (Device == 0) && (Function == 0)) {
+ ConfigAddress = PcdGet32 (PcdPcieRootPortConfigBaseAddress) + Address;
+ } else {
+ ConfigAddress = PcdGet64 (PcdPciExpressBaseAddress) + Address;
+ if (!IsBdfValid(Address)) {
+ ConfigAddress = (UINTN) &mDummyConfigData;
+ }
+ }
+
+ return (VOID*)ConfigAddress;
+}
+
+/**
+ Reads an 8-bit PCI configuration register.
+
+ Reads and returns the 8-bit PCI configuration register specified by Address.
+ This function must guarantee that all PCI read and write operations are
+ serialized.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+
+ @param Address The address that encodes the PCI Bus, Device, Function and
+ Register.
+
+ @return The read value from the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciExpressRead8 (
+ IN UINTN Address
+ )
+{
+ ASSERT_INVALID_PCI_ADDRESS (Address);
+ return MmioRead8 ((UINTN) GetPciExpressAddress (Address));
+}
+
+/**
+ Writes an 8-bit PCI configuration register.
+
+ Writes the 8-bit PCI configuration register specified by Address with the
+ value specified by Value. Value is returned. This function must guarantee
+ that all PCI read and write operations are serialized.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+
+ @param Address The address that encodes the PCI Bus, Device, Function and
+ Register.
+ @param Value The value to write.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciExpressWrite8 (
+ IN UINTN Address,
+ IN UINT8 Value
+ )
+{
+ UINT8 Bus, Device, Function;
+ UINT8 Offset;
+ UINT32 Data;
+
+ ASSERT_INVALID_PCI_ADDRESS (Address);
+
+ Bus = GET_BUS_NUM (Address);
+ Device = GET_DEV_NUM (Address);
+ Function = GET_FUNC_NUM (Address);
+
+ //
+ // 8-bit and 16-bit writes to root port config space is not supported due to
+ // a hardware limitation. As a workaround, perform a read-update-write
+ // sequence on the whole 32-bit word of the root port config register such
+ // that only the specified 8-bits of that word are updated.
+ //
+ if ((Bus == 0) && (Device == 0) && (Function == 0)) {
+ Offset = Address & 0x3;
+ Address &= 0xFFFFFFFC;
+ Data = MmioRead32 ((UINTN)GetPciExpressAddress (Address));
+ Data &= ~(0xFF << (8 * Offset));
+ Data |= (Value << (8 * Offset));
+ MmioWrite32 ((UINTN)GetPciExpressAddress (Address), Data);
+ return Value;
+ }
+
+ return MmioWrite8 ((UINTN)GetPciExpressAddress (Address), Value);
+}
+
+/**
+ Performs a bitwise OR of an 8-bit PCI configuration register with
+ an 8-bit value.
+
+ Reads the 8-bit PCI configuration register specified by Address, performs a
+ bitwise OR between the read result and the value specified by
+ OrData, and writes the result to the 8-bit PCI configuration register
+ specified by Address. The value written to the PCI configuration register is
+ returned. This function must guarantee that all PCI read and write operations
+ are serialized.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+
+ @param Address The address that encodes the PCI Bus, Device, Function and
+ Register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciExpressOr8 (
+ IN UINTN Address,
+ IN UINT8 OrData
+ )
+{
+ ASSERT_INVALID_PCI_ADDRESS (Address);
+ return MmioOr8 ((UINTN) GetPciExpressAddress (Address), OrData);
+}
+
+/**
+ Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit
+ value.
+
+ Reads the 8-bit PCI configuration register specified by Address, performs a
+ bitwise AND between the read result and the value specified by AndData, and
+ writes the result to the 8-bit PCI configuration register specified by
+ Address. The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are
+ serialized.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+
+ @param Address The address that encodes the PCI Bus, Device, Function and
+ Register.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciExpressAnd8 (
+ IN UINTN Address,
+ IN UINT8 AndData
+ )
+{
+ ASSERT_INVALID_PCI_ADDRESS (Address);
+ return MmioAnd8 ((UINTN) GetPciExpressAddress (Address), AndData);
+}
+
+/**
+ Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit
+ value, followed a bitwise OR with another 8-bit value.
+
+ Reads the 8-bit PCI configuration register specified by Address, performs a
+ bitwise AND between the read result and the value specified by AndData,
+ performs a bitwise OR between the result of the AND operation and
+ the value specified by OrData, and writes the result to the 8-bit PCI
+ configuration register specified by Address. The value written to the PCI
+ configuration register is returned. This function must guarantee that all PCI
+ read and write operations are serialized.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+
+ @param Address The address that encodes the PCI Bus, Device, Function and
+ Register.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the result of the AND operation.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciExpressAndThenOr8 (
+ IN UINTN Address,
+ IN UINT8 AndData,
+ IN UINT8 OrData
+ )
+{
+ ASSERT_INVALID_PCI_ADDRESS (Address);
+ return MmioAndThenOr8 (
+ (UINTN) GetPciExpressAddress (Address),
+ AndData,
+ OrData
+ );
+}
+
+/**
+ Reads a bit field of a PCI configuration register.
+
+ Reads the bit field in an 8-bit PCI configuration register. The bit field is
+ specified by the StartBit and the EndBit. The value of the bit field is
+ returned.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+
+ @param Address The PCI configuration register to read.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..7.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..7.
+
+ @return The value of the bit field read from the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciExpressBitFieldRead8 (
+ IN UINTN Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit
+ )
+{
+ ASSERT_INVALID_PCI_ADDRESS (Address);
+ return MmioBitFieldRead8 (
+ (UINTN) GetPciExpressAddress (Address),
+ StartBit,
+ EndBit
+ );
+}
+
+/**
+ Writes a bit field to a PCI configuration register.
+
+ Writes Value to the bit field of the PCI configuration register. The bit
+ field is specified by the StartBit and the EndBit. All other bits in the
+ destination PCI configuration register are preserved. The new value of the
+ 8-bit register is returned.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If Value is larger than the bitmask value range specified by StartBit and
EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..7.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..7.
+ @param Value The new value of the bit field.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciExpressBitFieldWrite8 (
+ IN UINTN Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT8 Value
+ )
+{
+ ASSERT_INVALID_PCI_ADDRESS (Address);
+ return MmioBitFieldWrite8 (
+ (UINTN) GetPciExpressAddress (Address),
+ StartBit,
+ EndBit,
+ Value
+ );
+}
+
+/**
+ Reads a bit field in an 8-bit PCI configuration, performs a bitwise OR, and
+ writes the result back to the bit field in the 8-bit port.
+
+ Reads the 8-bit PCI configuration register specified by Address, performs a
+ bitwise OR between the read result and the value specified by
+ OrData, and writes the result to the 8-bit PCI configuration register
+ specified by Address. The value written to the PCI configuration register is
+ returned. This function must guarantee that all PCI read and write operations
+ are serialized. Extra left bits in OrData are stripped.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit and
EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..7.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..7.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciExpressBitFieldOr8 (
+ IN UINTN Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT8 OrData
+ )
+{
+ ASSERT_INVALID_PCI_ADDRESS (Address);
+ return MmioBitFieldOr8 (
+ (UINTN) GetPciExpressAddress (Address),
+ StartBit,
+ EndBit,
+ OrData
+ );
+}
+
+/**
+ Reads a bit field in an 8-bit PCI configuration register, performs a bitwise
+ AND, and writes the result back to the bit field in the 8-bit register.
+
+ Reads the 8-bit PCI configuration register specified by Address, performs a
+ bitwise AND between the read result and the value specified by AndData, and
+ writes the result to the 8-bit PCI configuration register specified by
+ Address. The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are
+ serialized. Extra left bits in AndData are stripped.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit and
EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..7.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..7.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciExpressBitFieldAnd8 (
+ IN UINTN Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT8 AndData
+ )
+{
+ ASSERT_INVALID_PCI_ADDRESS (Address);
+ return MmioBitFieldAnd8 (
+ (UINTN) GetPciExpressAddress (Address),
+ StartBit,
+ EndBit,
+ AndData
+ );
+}
+
+/**
+ Reads a bit field in an 8-bit port, performs a bitwise AND followed by a
+ bitwise OR, and writes the result back to the bit field in the
+ 8-bit port.
+
+ Reads the 8-bit PCI configuration register specified by Address, performs a
+ bitwise AND followed by a bitwise OR between the read result and
+ the value specified by AndData, and writes the result to the 8-bit PCI
+ configuration register specified by Address. The value written to the PCI
+ configuration register is returned. This function must guarantee that all PCI
+ read and write operations are serialized. Extra left bits in both AndData and
+ OrData are stripped.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit and
EndBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit and
EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..7.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..7.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the result of the AND operation.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciExpressBitFieldAndThenOr8 (
+ IN UINTN Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT8 AndData,
+ IN UINT8 OrData
+ )
+{
+ ASSERT_INVALID_PCI_ADDRESS (Address);
+ return MmioBitFieldAndThenOr8 (
+ (UINTN) GetPciExpressAddress (Address),
+ StartBit,
+ EndBit,
+ AndData,
+ OrData
+ );
+}
+
+/**
+ Reads a 16-bit PCI configuration register.
+
+ Reads and returns the 16-bit PCI configuration register specified by Address.
+ This function must guarantee that all PCI read and write operations are
+ serialized.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Bus, Device, Function and
+ Register.
+
+ @return The read value from the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciExpressRead16 (
+ IN UINTN Address
+ )
+{
+ ASSERT_INVALID_PCI_ADDRESS (Address);
+ return MmioRead16 ((UINTN) GetPciExpressAddress (Address));
+}
+
+/**
+ Writes a 16-bit PCI configuration register.
+
+ Writes the 16-bit PCI configuration register specified by Address with the
+ value specified by Value. Value is returned. This function must guarantee
+ that all PCI read and write operations are serialized.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Bus, Device, Function and
+ Register.
+ @param Value The value to write.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciExpressWrite16 (
+ IN UINTN Address,
+ IN UINT16 Value
+ )
+{
+ UINT8 Bus, Device, Function;
+ UINT8 Offset;
+ UINT32 Data;
+
+ ASSERT_INVALID_PCI_ADDRESS (Address);
+
+ Bus = GET_BUS_NUM (Address);
+ Device = GET_DEV_NUM (Address);
+ Function = GET_FUNC_NUM (Address);
+
+ //
+ // 8-bit and 16-bit writes to root port config space is not supported due to
+ // a hardware limitation. As a workaround, perform a read-update-write
+ // sequence on the whole 32-bit word of the root port config register such
+ // that only the specified 16-bits of that word are updated.
+ //
+ if ((Bus == 0) && (Device == 0) && (Function == 0)) {
+ Offset = Address & 0x3;
+ Address &= 0xFFFFFFFC;
+ Data = MmioRead32 ((UINTN)GetPciExpressAddress (Address));
+ Data &= ~(0xFFFF << (8 * Offset));
+ Data |= (Value << (8 * Offset));
+ MmioWrite32 ((UINTN)GetPciExpressAddress (Address), Data);
+ return Value;
+ }
+
+ return MmioWrite16 ((UINTN) GetPciExpressAddress (Address), Value);
+}
+
+/**
+ Performs a bitwise OR of a 16-bit PCI configuration register with
+ a 16-bit value.
+
+ Reads the 16-bit PCI configuration register specified by Address, performs a
+ bitwise OR between the read result and the value specified by
+ OrData, and writes the result to the 16-bit PCI configuration register
+ specified by Address. The value written to the PCI configuration register is
+ returned. This function must guarantee that all PCI read and write operations
+ are serialized.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Bus, Device, Function and
+ Register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciExpressOr16 (
+ IN UINTN Address,
+ IN UINT16 OrData
+ )
+{
+ ASSERT_INVALID_PCI_ADDRESS (Address);
+ return MmioOr16 ((UINTN) GetPciExpressAddress (Address), OrData);
+}
+
+/**
+ Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit
+ value.
+
+ Reads the 16-bit PCI configuration register specified by Address, performs a
+ bitwise AND between the read result and the value specified by AndData, and
+ writes the result to the 16-bit PCI configuration register specified by
+ Address. The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are
+ serialized.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Bus, Device, Function and
+ Register.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciExpressAnd16 (
+ IN UINTN Address,
+ IN UINT16 AndData
+ )
+{
+ ASSERT_INVALID_PCI_ADDRESS (Address);
+ return MmioAnd16 ((UINTN) GetPciExpressAddress (Address), AndData);
+}
+
+/**
+ Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit
+ value, followed a bitwise OR with another 16-bit value.
+
+ Reads the 16-bit PCI configuration register specified by Address, performs a
+ bitwise AND between the read result and the value specified by AndData,
+ performs a bitwise OR between the result of the AND operation and
+ the value specified by OrData, and writes the result to the 16-bit PCI
+ configuration register specified by Address. The value written to the PCI
+ configuration register is returned. This function must guarantee that all PCI
+ read and write operations are serialized.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Bus, Device, Function and
+ Register.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the result of the AND operation.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciExpressAndThenOr16 (
+ IN UINTN Address,
+ IN UINT16 AndData,
+ IN UINT16 OrData
+ )
+{
+ ASSERT_INVALID_PCI_ADDRESS (Address);
+ return MmioAndThenOr16 (
+ (UINTN) GetPciExpressAddress (Address),
+ AndData,
+ OrData
+ );
+}
+
+/**
+ Reads a bit field of a PCI configuration register.
+
+ Reads the bit field in a 16-bit PCI configuration register. The bit field is
+ specified by the StartBit and the EndBit. The value of the bit field is
+ returned.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+ If StartBit is greater than 15, then ASSERT().
+ If EndBit is greater than 15, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+
+ @param Address The PCI configuration register to read.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..15.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..15.
+
+ @return The value of the bit field read from the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciExpressBitFieldRead16 (
+ IN UINTN Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit
+ )
+{
+ ASSERT_INVALID_PCI_ADDRESS (Address);
+ return MmioBitFieldRead16 (
+ (UINTN) GetPciExpressAddress (Address),
+ StartBit,
+ EndBit
+ );
+}
+
+/**
+ Writes a bit field to a PCI configuration register.
+
+ Writes Value to the bit field of the PCI configuration register. The bit
+ field is specified by the StartBit and the EndBit. All other bits in the
+ destination PCI configuration register are preserved. The new value of the
+ 16-bit register is returned.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+ If StartBit is greater than 15, then ASSERT().
+ If EndBit is greater than 15, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If Value is larger than the bitmask value range specified by StartBit and
EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..15.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..15.
+ @param Value The new value of the bit field.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciExpressBitFieldWrite16 (
+ IN UINTN Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT16 Value
+ )
+{
+ ASSERT_INVALID_PCI_ADDRESS (Address);
+ return MmioBitFieldWrite16 (
+ (UINTN) GetPciExpressAddress (Address),
+ StartBit,
+ EndBit,
+ Value
+ );
+}
+
+/**
+ Reads a bit field in a 16-bit PCI configuration, performs a bitwise OR, and
+ writes the result back to the bit field in the 16-bit port.
+
+ Reads the 16-bit PCI configuration register specified by Address, performs a
+ bitwise OR between the read result and the value specified by
+ OrData, and writes the result to the 16-bit PCI configuration register
+ specified by Address. The value written to the PCI configuration register is
+ returned. This function must guarantee that all PCI read and write operations
+ are serialized. Extra left bits in OrData are stripped.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+ If StartBit is greater than 15, then ASSERT().
+ If EndBit is greater than 15, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit and
EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..15.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..15.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciExpressBitFieldOr16 (
+ IN UINTN Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT16 OrData
+ )
+{
+ ASSERT_INVALID_PCI_ADDRESS (Address);
+ return MmioBitFieldOr16 (
+ (UINTN) GetPciExpressAddress (Address),
+ StartBit,
+ EndBit,
+ OrData
+ );
+}
+
+/**
+ Reads a bit field in a 16-bit PCI configuration register, performs a bitwise
+ AND, and writes the result back to the bit field in the 16-bit register.
+
+ Reads the 16-bit PCI configuration register specified by Address, performs a
+ bitwise AND between the read result and the value specified by AndData, and
+ writes the result to the 16-bit PCI configuration register specified by
+ Address. The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are
+ serialized. Extra left bits in AndData are stripped.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+ If StartBit is greater than 15, then ASSERT().
+ If EndBit is greater than 15, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit and
EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..15.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..15.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciExpressBitFieldAnd16 (
+ IN UINTN Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT16 AndData
+ )
+{
+ ASSERT_INVALID_PCI_ADDRESS (Address);
+ return MmioBitFieldAnd16 (
+ (UINTN) GetPciExpressAddress (Address),
+ StartBit,
+ EndBit,
+ AndData
+ );
+}
+
+/**
+ Reads a bit field in a 16-bit port, performs a bitwise AND followed by a
+ bitwise OR, and writes the result back to the bit field in the
+ 16-bit port.
+
+ Reads the 16-bit PCI configuration register specified by Address, performs a
+ bitwise AND followed by a bitwise OR between the read result and
+ the value specified by AndData, and writes the result to the 16-bit PCI
+ configuration register specified by Address. The value written to the PCI
+ configuration register is returned. This function must guarantee that all PCI
+ read and write operations are serialized. Extra left bits in both AndData and
+ OrData are stripped.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+ If StartBit is greater than 15, then ASSERT().
+ If EndBit is greater than 15, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit and
EndBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit and
EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..15.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..15.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the result of the AND operation.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciExpressBitFieldAndThenOr16 (
+ IN UINTN Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT16 AndData,
+ IN UINT16 OrData
+ )
+{
+ ASSERT_INVALID_PCI_ADDRESS (Address);
+ return MmioBitFieldAndThenOr16 (
+ (UINTN) GetPciExpressAddress (Address),
+ StartBit,
+ EndBit,
+ AndData,
+ OrData
+ );
+}
+
+/**
+ Reads a 32-bit PCI configuration register.
+
+ Reads and returns the 32-bit PCI configuration register specified by Address.
+ This function must guarantee that all PCI read and write operations are
+ serialized.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Bus, Device, Function and
+ Register.
+
+ @return The read value from the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciExpressRead32 (
+ IN UINTN Address
+ )
+{
+ ASSERT_INVALID_PCI_ADDRESS (Address);
+ return MmioRead32 ((UINTN) GetPciExpressAddress (Address));
+}
+
+/**
+ Writes a 32-bit PCI configuration register.
+
+ Writes the 32-bit PCI configuration register specified by Address with the
+ value specified by Value. Value is returned. This function must guarantee
+ that all PCI read and write operations are serialized.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Bus, Device, Function and
+ Register.
+ @param Value The value to write.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciExpressWrite32 (
+ IN UINTN Address,
+ IN UINT32 Value
+ )
+{
+ ASSERT_INVALID_PCI_ADDRESS (Address);
+ return MmioWrite32 ((UINTN) GetPciExpressAddress (Address), Value);
+}
+
+/**
+ Performs a bitwise OR of a 32-bit PCI configuration register with
+ a 32-bit value.
+
+ Reads the 32-bit PCI configuration register specified by Address, performs a
+ bitwise OR between the read result and the value specified by
+ OrData, and writes the result to the 32-bit PCI configuration register
+ specified by Address. The value written to the PCI configuration register is
+ returned. This function must guarantee that all PCI read and write operations
+ are serialized.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Bus, Device, Function and
+ Register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciExpressOr32 (
+ IN UINTN Address,
+ IN UINT32 OrData
+ )
+{
+ ASSERT_INVALID_PCI_ADDRESS (Address);
+ return MmioOr32 ((UINTN) GetPciExpressAddress (Address), OrData);
+}
+
+/**
+ Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit
+ value.
+
+ Reads the 32-bit PCI configuration register specified by Address, performs a
+ bitwise AND between the read result and the value specified by AndData, and
+ writes the result to the 32-bit PCI configuration register specified by
+ Address. The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are
+ serialized.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Bus, Device, Function and
+ Register.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciExpressAnd32 (
+ IN UINTN Address,
+ IN UINT32 AndData
+ )
+{
+ ASSERT_INVALID_PCI_ADDRESS (Address);
+ return MmioAnd32 ((UINTN) GetPciExpressAddress (Address), AndData);
+}
+
+/**
+ Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit
+ value, followed a bitwise OR with another 32-bit value.
+
+ Reads the 32-bit PCI configuration register specified by Address, performs a
+ bitwise AND between the read result and the value specified by AndData,
+ performs a bitwise OR between the result of the AND operation and
+ the value specified by OrData, and writes the result to the 32-bit PCI
+ configuration register specified by Address. The value written to the PCI
+ configuration register is returned. This function must guarantee that all PCI
+ read and write operations are serialized.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Bus, Device, Function and
+ Register.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the result of the AND operation.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciExpressAndThenOr32 (
+ IN UINTN Address,
+ IN UINT32 AndData,
+ IN UINT32 OrData
+ )
+{
+ ASSERT_INVALID_PCI_ADDRESS (Address);
+ return MmioAndThenOr32 (
+ (UINTN) GetPciExpressAddress (Address),
+ AndData,
+ OrData
+ );
+}
+
+/**
+ Reads a bit field of a PCI configuration register.
+
+ Reads the bit field in a 32-bit PCI configuration register. The bit field is
+ specified by the StartBit and the EndBit. The value of the bit field is
+ returned.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+ If StartBit is greater than 31, then ASSERT().
+ If EndBit is greater than 31, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+
+ @param Address The PCI configuration register to read.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..31.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..31.
+
+ @return The value of the bit field read from the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciExpressBitFieldRead32 (
+ IN UINTN Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit
+ )
+{
+ ASSERT_INVALID_PCI_ADDRESS (Address);
+ return MmioBitFieldRead32 (
+ (UINTN) GetPciExpressAddress (Address),
+ StartBit,
+ EndBit
+ );
+}
+
+/**
+ Writes a bit field to a PCI configuration register.
+
+ Writes Value to the bit field of the PCI configuration register. The bit
+ field is specified by the StartBit and the EndBit. All other bits in the
+ destination PCI configuration register are preserved. The new value of the
+ 32-bit register is returned.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+ If StartBit is greater than 31, then ASSERT().
+ If EndBit is greater than 31, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If Value is larger than the bitmask value range specified by StartBit and
EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..31.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..31.
+ @param Value The new value of the bit field.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciExpressBitFieldWrite32 (
+ IN UINTN Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT32 Value
+ )
+{
+ ASSERT_INVALID_PCI_ADDRESS (Address);
+ return MmioBitFieldWrite32 (
+ (UINTN) GetPciExpressAddress (Address),
+ StartBit,
+ EndBit,
+ Value
+ );
+}
+
+/**
+ Reads a bit field in a 32-bit PCI configuration, performs a bitwise OR, and
+ writes the result back to the bit field in the 32-bit port.
+
+ Reads the 32-bit PCI configuration register specified by Address, performs a
+ bitwise OR between the read result and the value specified by
+ OrData, and writes the result to the 32-bit PCI configuration register
+ specified by Address. The value written to the PCI configuration register is
+ returned. This function must guarantee that all PCI read and write operations
+ are serialized. Extra left bits in OrData are stripped.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+ If StartBit is greater than 31, then ASSERT().
+ If EndBit is greater than 31, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit and
EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..31.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..31.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciExpressBitFieldOr32 (
+ IN UINTN Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT32 OrData
+ )
+{
+ ASSERT_INVALID_PCI_ADDRESS (Address);
+ return MmioBitFieldOr32 (
+ (UINTN) GetPciExpressAddress (Address),
+ StartBit,
+ EndBit,
+ OrData
+ );
+}
+
+/**
+ Reads a bit field in a 32-bit PCI configuration register, performs a bitwise
+ AND, and writes the result back to the bit field in the 32-bit register.
+
+ Reads the 32-bit PCI configuration register specified by Address, performs a
+ bitwise AND between the read result and the value specified by AndData, and
+ writes the result to the 32-bit PCI configuration register specified by
+ Address. The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are
+ serialized. Extra left bits in AndData are stripped.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+ If StartBit is greater than 31, then ASSERT().
+ If EndBit is greater than 31, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit and
EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..31.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..31.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciExpressBitFieldAnd32 (
+ IN UINTN Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT32 AndData
+ )
+{
+ ASSERT_INVALID_PCI_ADDRESS (Address);
+ return MmioBitFieldAnd32 (
+ (UINTN) GetPciExpressAddress (Address),
+ StartBit,
+ EndBit,
+ AndData
+ );
+}
+
+/**
+ Reads a bit field in a 32-bit port, performs a bitwise AND followed by a
+ bitwise OR, and writes the result back to the bit field in the
+ 32-bit port.
+
+ Reads the 32-bit PCI configuration register specified by Address, performs a
+ bitwise AND followed by a bitwise OR between the read result and
+ the value specified by AndData, and writes the result to the 32-bit PCI
+ configuration register specified by Address. The value written to the PCI
+ configuration register is returned. This function must guarantee that all PCI
+ read and write operations are serialized. Extra left bits in both AndData and
+ OrData are stripped.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+ If StartBit is greater than 31, then ASSERT().
+ If EndBit is greater than 31, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit and
EndBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit and
EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..31.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..31.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the result of the AND operation.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciExpressBitFieldAndThenOr32 (
+ IN UINTN Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT32 AndData,
+ IN UINT32 OrData
+ )
+{
+ ASSERT_INVALID_PCI_ADDRESS (Address);
+ return MmioBitFieldAndThenOr32 (
+ (UINTN) GetPciExpressAddress (Address),
+ StartBit,
+ EndBit,
+ AndData,
+ OrData
+ );
+}
+
+/**
+ Reads a range of PCI configuration registers into a caller supplied buffer.
+
+ Reads the range of PCI configuration registers specified by StartAddress and
+ Size into the buffer specified by Buffer. This function only allows the PCI
+ configuration registers from a single PCI function to be read. Size is
+ returned. When possible 32-bit PCI configuration read cycles are used to read
+ from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit
+ and 16-bit PCI configuration read cycles may be used at the beginning and the
+ end of the range.
+
+ If StartAddress > 0x0FFFFFFF, then ASSERT().
+ If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT().
+ If Size > 0 and Buffer is NULL, then ASSERT().
+
+ @param StartAddress The starting address that encodes the PCI Bus, Device,
+ Function and Register.
+ @param Size The size in bytes of the transfer.
+ @param Buffer The pointer to a buffer receiving the data read.
+
+ @return Size read data from StartAddress.
+
+**/
+UINTN
+EFIAPI
+PciExpressReadBuffer (
+ IN UINTN StartAddress,
+ IN UINTN Size,
+ OUT VOID *Buffer
+ )
+{
+ UINTN ReturnValue;
+
+ ASSERT_INVALID_PCI_ADDRESS (StartAddress);
+ ASSERT (((StartAddress & 0xFFF) + Size) <= 0x1000);
+
+ if (Size == 0) {
+ return Size;
+ }
+
+ ASSERT (Buffer != NULL);
+
+ //
+ // Save Size for return
+ //
+ ReturnValue = Size;
+
+ if ((StartAddress & 1) != 0) {
+ //
+ // Read a byte if StartAddress is byte aligned
+ //
+ *(volatile UINT8 *)Buffer = PciExpressRead8 (StartAddress);
+ StartAddress += sizeof (UINT8);
+ Size -= sizeof (UINT8);
+ Buffer = (UINT8*)Buffer + 1;
+ }
+
+ if (Size >= sizeof (UINT16) && (StartAddress & 2) != 0) {
+ //
+ // Read a word if StartAddress is word aligned
+ //
+ WriteUnaligned16 ((UINT16 *) Buffer, (UINT16) PciExpressRead16
(StartAddress));
+
+ StartAddress += sizeof (UINT16);
+ Size -= sizeof (UINT16);
+ Buffer = (UINT16*)Buffer + 1;
+ }
+
+ while (Size >= sizeof (UINT32)) {
+ //
+ // Read as many double words as possible
+ //
+ WriteUnaligned32 ((UINT32 *) Buffer, (UINT32) PciExpressRead32
(StartAddress));
+
+ StartAddress += sizeof (UINT32);
+ Size -= sizeof (UINT32);
+ Buffer = (UINT32*)Buffer + 1;
+ }
+
+ if (Size >= sizeof (UINT16)) {
+ //
+ // Read the last remaining word if exist
+ //
+ WriteUnaligned16 ((UINT16 *) Buffer, (UINT16) PciExpressRead16
(StartAddress));
+ StartAddress += sizeof (UINT16);
+ Size -= sizeof (UINT16);
+ Buffer = (UINT16*)Buffer + 1;
+ }
+
+ if (Size >= sizeof (UINT8)) {
+ //
+ // Read the last remaining byte if exist
+ //
+ *(volatile UINT8 *)Buffer = PciExpressRead8 (StartAddress);
+ }
+
+ return ReturnValue;
+}
+
+/**
+ Copies the data in a caller supplied buffer to a specified range of PCI
+ configuration space.
+
+ Writes the range of PCI configuration registers specified by StartAddress and
+ Size from the buffer specified by Buffer. This function only allows the PCI
+ configuration registers from a single PCI function to be written. Size is
+ returned. When possible 32-bit PCI configuration write cycles are used to
+ write from StartAdress to StartAddress + Size. Due to alignment restrictions,
+ 8-bit and 16-bit PCI configuration write cycles may be used at the beginning
+ and the end of the range.
+
+ If StartAddress > 0x0FFFFFFF, then ASSERT().
+ If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT().
+ If Size > 0 and Buffer is NULL, then ASSERT().
+
+ @param StartAddress The starting address that encodes the PCI Bus, Device,
+ Function and Register.
+ @param Size The size in bytes of the transfer.
+ @param Buffer The pointer to a buffer containing the data to write.
+
+ @return Size written to StartAddress.
+
+**/
+UINTN
+EFIAPI
+PciExpressWriteBuffer (
+ IN UINTN StartAddress,
+ IN UINTN Size,
+ IN VOID *Buffer
+ )
+{
+ UINTN ReturnValue;
+
+ ASSERT_INVALID_PCI_ADDRESS (StartAddress);
+ ASSERT (((StartAddress & 0xFFF) + Size) <= 0x1000);
+
+ if (Size == 0) {
+ return 0;
+ }
+
+ ASSERT (Buffer != NULL);
+
+ //
+ // Save Size for return
+ //
+ ReturnValue = Size;
+
+ if ((StartAddress & 1) != 0) {
+ //
+ // Write a byte if StartAddress is byte aligned
+ //
+ PciExpressWrite8 (StartAddress, *(UINT8*)Buffer);
+ StartAddress += sizeof (UINT8);
+ Size -= sizeof (UINT8);
+ Buffer = (UINT8*)Buffer + 1;
+ }
+
+ if (Size >= sizeof (UINT16) && (StartAddress & 2) != 0) {
+ //
+ // Write a word if StartAddress is word aligned
+ //
+ PciExpressWrite16 (StartAddress, ReadUnaligned16 ((UINT16*)Buffer));
+ StartAddress += sizeof (UINT16);
+ Size -= sizeof (UINT16);
+ Buffer = (UINT16*)Buffer + 1;
+ }
+
+ while (Size >= sizeof (UINT32)) {
+ //
+ // Write as many double words as possible
+ //
+ PciExpressWrite32 (StartAddress, ReadUnaligned32 ((UINT32*)Buffer));
+ StartAddress += sizeof (UINT32);
+ Size -= sizeof (UINT32);
+ Buffer = (UINT32*)Buffer + 1;
+ }
+
+ if (Size >= sizeof (UINT16)) {
+ //
+ // Write the last remaining word if exist
+ //
+ PciExpressWrite16 (StartAddress, ReadUnaligned16 ((UINT16*)Buffer));
+ StartAddress += sizeof (UINT16);
+ Size -= sizeof (UINT16);
+ Buffer = (UINT16*)Buffer + 1;
+ }
+
+ if (Size >= sizeof (UINT8)) {
+ //
+ // Write the last remaining byte if exist
+ //
+ PciExpressWrite8 (StartAddress, *(UINT8*)Buffer);
+ }
+
+ return ReturnValue;
+}
--
2.7.4
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#62794): https://edk2.groups.io/g/devel/message/62794
Mute This Topic: https://groups.io/mt/75658679/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
