REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3907
This change modifies AhciPei library to allow usage both EDKII_PCI_DEVICE_PPI
and EDKII_PEI_ATA_AHCI_HOST_CONTROLLER_PPI to manage ATA HDD working under
AHCI mode.
Cc: Hao A Wu <hao.a...@intel.com>
Cc: Ray Ni <ray...@intel.com>
Signed-off-by: Maciej Czajkowski <maciej.czajkow...@intel.com>
---
MdeModulePkg/Bus/Ata/AhciPei/AhciPei.c | 615 +++++++++++++++-----
MdeModulePkg/Bus/Ata/AhciPei/DevicePath.c | 44 --
MdeModulePkg/Bus/Ata/AhciPei/AhciPei.inf | 5 +-
3 files changed, 458 insertions(+), 206 deletions(-)
diff --git a/MdeModulePkg/Bus/Ata/AhciPei/AhciPei.c
b/MdeModulePkg/Bus/Ata/AhciPei/AhciPei.c
index 208b7e9a3606..31bb3c0760ab 100644
--- a/MdeModulePkg/Bus/Ata/AhciPei/AhciPei.c
+++ b/MdeModulePkg/Bus/Ata/AhciPei/AhciPei.c
@@ -9,6 +9,47 @@
**/
#include "AhciPei.h"
+#include <Ppi/PciDevice.h>
+#include <Library/DevicePathLib.h>
+#include <IndustryStandard/Pci.h>
+
+/**
+ Callback for EDKII_ATA_AHCI_HOST_CONTROLLER_PPI installation.
+
+ @param[in] PeiServices Pointer to PEI Services Table.
+ @param[in] NotifyDescriptor Pointer to the descriptor for the Notification
+ event that caused this function to execute.
+ @param[in] Ppi Pointer to the PPI data associated with this
function.
+
+ @retval EFI_SUCCESS The function completes successfully
+
+**/
+EFI_STATUS
+EFIAPI
+AtaAhciHostControllerPpiInstallationCallback (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN EFI_PEI_NOTIFY_DESCRIPTOR *NotifyDescriptor,
+ IN VOID *Ppi
+ );
+
+/**
+ Callback for EDKII_PCI_DEVICE_PPI installation.
+
+ @param[in] PeiServices Pointer to PEI Services Table.
+ @param[in] NotifyDescriptor Pointer to the descriptor for the Notification
+ event that caused this function to execute.
+ @param[in] Ppi Pointer to the PPI data associated with this
function.
+
+ @retval EFI_SUCCESS The function completes successfully
+
+**/
+EFI_STATUS
+EFIAPI
+AtaAhciPciDevicePpiInstallationCallback (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN EFI_PEI_NOTIFY_DESCRIPTOR *NotifyDescriptor,
+ IN VOID *Ppi
+ );
EFI_PEI_PPI_DESCRIPTOR mAhciAtaPassThruPpiListTemplate = {
(EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST),
@@ -40,6 +81,18 @@ EFI_PEI_NOTIFY_DESCRIPTOR mAhciEndOfPeiNotifyListTemplate =
{
AhciPeimEndOfPei
};
+EFI_PEI_NOTIFY_DESCRIPTOR mAtaAhciHostControllerNotify = {
+ (EFI_PEI_PPI_DESCRIPTOR_NOTIFY_CALLBACK |
EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST),
+ &gEdkiiPeiAtaAhciHostControllerPpiGuid,
+ AtaAhciHostControllerPpiInstallationCallback
+};
+
+EFI_PEI_NOTIFY_DESCRIPTOR mPciDevicePpiNotify = {
+ (EFI_PEI_PPI_DESCRIPTOR_NOTIFY_CALLBACK |
EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST),
+ &gEdkiiPeiPciDevicePpiGuid,
+ AtaAhciPciDevicePpiInstallationCallback
+};
+
/**
Free the DMA resources allocated by an ATA AHCI controller.
@@ -111,33 +164,28 @@ AhciPeimEndOfPei (
}
/**
- Entry point of the PEIM.
+ Initialize and install PrivateData PPIs.
- @param[in] FileHandle Handle of the file being invoked.
- @param[in] PeiServices Describes the list of possible PEI Services.
-
- @retval EFI_SUCCESS PPI successfully installed.
+ @param[in] Private A pointer to the PEI_AHCI_CONTROLLER_PRIVATE_DATA data
+ structure.
+ @retval EFI_SUCCESS AHCI controller initialized and PPIs installed
+ @retval others Failed to initialize AHCI controller
**/
EFI_STATUS
-EFIAPI
-AtaAhciPeimEntry (
- IN EFI_PEI_FILE_HANDLE FileHandle,
- IN CONST EFI_PEI_SERVICES **PeiServices
+AtaAhciInitPrivateData (
+ IN UINTN MmioBase,
+ IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
+ IN UINTN DevicePathLength
)
{
- EFI_STATUS Status;
- EFI_BOOT_MODE BootMode;
- EDKII_ATA_AHCI_HOST_CONTROLLER_PPI *AhciHcPpi;
- UINT8 Controller;
- UINTN MmioBase;
- UINTN DevicePathLength;
- EFI_DEVICE_PATH_PROTOCOL *DevicePath;
- UINT32 PortBitMap;
- PEI_AHCI_CONTROLLER_PRIVATE_DATA *Private;
- UINT8 NumberOfPorts;
+ EFI_STATUS Status;
+ UINT32 PortBitMap;
+ UINT8 NumberOfPorts;
+ PEI_AHCI_CONTROLLER_PRIVATE_DATA *Private;
+ EFI_BOOT_MODE BootMode;
- DEBUG ((DEBUG_INFO, "%a: Enters.\n", __FUNCTION__));
+ DEBUG ((DEBUG_INFO, "Initializing private data for ATA\n"));
//
// Get the current boot mode.
@@ -149,19 +197,149 @@ AtaAhciPeimEntry (
}
//
- // Locate the ATA AHCI host controller PPI.
- //
- Status = PeiServicesLocatePpi (
- &gEdkiiPeiAtaAhciHostControllerPpiGuid,
- 0,
- NULL,
- (VOID **)&AhciHcPpi
- );
+ // Check validity of the device path of the ATA AHCI controller.
+ //
+ Status = AhciIsHcDevicePathValid (DevicePath, DevicePathLength);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "%a: The device path is invalid.\n",
+ __FUNCTION__
+ ));
+ return Status;
+ }
+
+ //
+ // For S3 resume performance consideration, not all ports on an ATA AHCI
+ // controller will be enumerated/initialized. The driver consumes the
+ // content within S3StorageDeviceInitList LockBox to get the ports that
+ // will be enumerated/initialized during S3 resume.
+ //
+ if (BootMode == BOOT_ON_S3_RESUME) {
+ NumberOfPorts = AhciS3GetEumeratePorts (DevicePath, DevicePathLength,
&PortBitMap);
+ if (NumberOfPorts == 0) {
+ return EFI_SUCCESS;
+ }
+ } else {
+ PortBitMap = MAX_UINT32;
+ }
+
+ //
+ // Memory allocation for controller private data.
+ //
+ Private = AllocateZeroPool (sizeof (PEI_AHCI_CONTROLLER_PRIVATE_DATA));
+ if (Private == NULL) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "%a: Fail to allocate private data.\n",
+ __FUNCTION__
+ ));
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ //
+ // Initialize controller private data.
+ //
+ Private->Signature = AHCI_PEI_CONTROLLER_PRIVATE_DATA_SIGNATURE;
+ Private->MmioBase = MmioBase;
+ Private->DevicePathLength = DevicePathLength;
+ Private->DevicePath = DevicePath;
+ Private->PortBitMap = PortBitMap;
+ InitializeListHead (&Private->DeviceList);
+
+ Status = AhciModeInitialization (Private);
if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "%a: Failed to locate AtaAhciHostControllerPpi.\n",
__FUNCTION__));
- return EFI_UNSUPPORTED;
+ return Status;
+ }
+
+ Private->AtaPassThruMode.Attributes = EFI_ATA_PASS_THRU_ATTRIBUTES_PHYSICAL |
+ EFI_ATA_PASS_THRU_ATTRIBUTES_LOGICAL;
+ Private->AtaPassThruMode.IoAlign = sizeof (UINTN);
+ Private->AtaPassThruPpi.Revision = EDKII_PEI_ATA_PASS_THRU_PPI_REVISION;
+ Private->AtaPassThruPpi.Mode = &Private->AtaPassThruMode;
+ Private->AtaPassThruPpi.PassThru = AhciAtaPassThruPassThru;
+ Private->AtaPassThruPpi.GetNextPort = AhciAtaPassThruGetNextPort;
+ Private->AtaPassThruPpi.GetNextDevice = AhciAtaPassThruGetNextDevice;
+ Private->AtaPassThruPpi.GetDevicePath = AhciAtaPassThruGetDevicePath;
+ CopyMem (
+ &Private->AtaPassThruPpiList,
+ &mAhciAtaPassThruPpiListTemplate,
+ sizeof (EFI_PEI_PPI_DESCRIPTOR)
+ );
+ Private->AtaPassThruPpiList.Ppi = &Private->AtaPassThruPpi;
+ PeiServicesInstallPpi (&Private->AtaPassThruPpiList);
+
+ Private->BlkIoPpi.GetNumberOfBlockDevices = AhciBlockIoGetDeviceNo;
+ Private->BlkIoPpi.GetBlockDeviceMediaInfo = AhciBlockIoGetMediaInfo;
+ Private->BlkIoPpi.ReadBlocks = AhciBlockIoReadBlocks;
+ CopyMem (
+ &Private->BlkIoPpiList,
+ &mAhciBlkIoPpiListTemplate,
+ sizeof (EFI_PEI_PPI_DESCRIPTOR)
+ );
+ Private->BlkIoPpiList.Ppi = &Private->BlkIoPpi;
+ PeiServicesInstallPpi (&Private->BlkIoPpiList);
+
+ Private->BlkIo2Ppi.Revision =
EFI_PEI_RECOVERY_BLOCK_IO2_PPI_REVISION;
+ Private->BlkIo2Ppi.GetNumberOfBlockDevices = AhciBlockIoGetDeviceNo2;
+ Private->BlkIo2Ppi.GetBlockDeviceMediaInfo = AhciBlockIoGetMediaInfo2;
+ Private->BlkIo2Ppi.ReadBlocks = AhciBlockIoReadBlocks2;
+ CopyMem (
+ &Private->BlkIo2PpiList,
+ &mAhciBlkIo2PpiListTemplate,
+ sizeof (EFI_PEI_PPI_DESCRIPTOR)
+ );
+ Private->BlkIo2PpiList.Ppi = &Private->BlkIo2Ppi;
+ PeiServicesInstallPpi (&Private->BlkIo2PpiList);
+
+ if (Private->TrustComputingDevices != 0) {
+ DEBUG ((
+ DEBUG_INFO,
+ "%a: Security Security Command PPI will be produced.\n",
+ __FUNCTION__
+ ));
+ Private->StorageSecurityPpi.Revision =
EDKII_STORAGE_SECURITY_PPI_REVISION;
+ Private->StorageSecurityPpi.GetNumberofDevices =
AhciStorageSecurityGetDeviceNo;
+ Private->StorageSecurityPpi.GetDevicePath =
AhciStorageSecurityGetDevicePath;
+ Private->StorageSecurityPpi.ReceiveData =
AhciStorageSecurityReceiveData;
+ Private->StorageSecurityPpi.SendData =
AhciStorageSecuritySendData;
+ CopyMem (
+ &Private->StorageSecurityPpiList,
+ &mAhciStorageSecurityPpiListTemplate,
+ sizeof (EFI_PEI_PPI_DESCRIPTOR)
+ );
+ Private->StorageSecurityPpiList.Ppi = &Private->StorageSecurityPpi;
+ PeiServicesInstallPpi (&Private->StorageSecurityPpiList);
}
+ CopyMem (
+ &Private->EndOfPeiNotifyList,
+ &mAhciEndOfPeiNotifyListTemplate,
+ sizeof (EFI_PEI_NOTIFY_DESCRIPTOR)
+ );
+ PeiServicesNotifyPpi (&Private->EndOfPeiNotifyList);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Initialize AHCI controller from EDKII_ATA_AHCI_HOST_CONTROLLER_PPI instance.
+
+ @param[in] AhciHcPpi Pointer to the AHCI Host Controller PPI instance.
+
+ @retval EFI_SUCCESS PPI successfully installed.
+**/
+EFI_STATUS
+AtaAhciInitPrivateDataFromHostControllerPpi (
+ IN EDKII_ATA_AHCI_HOST_CONTROLLER_PPI *AhciHcPpi
+ )
+{
+ UINT8 Controller;
+ UINTN MmioBase;
+ UINTN DevicePathLength;
+ EFI_DEVICE_PATH_PROTOCOL *DevicePath;
+ EFI_STATUS Status;
+
Controller = 0;
MmioBase = 0;
while (TRUE) {
@@ -193,65 +371,7 @@ AtaAhciPeimEntry (
return Status;
}
- //
- // Check validity of the device path of the ATA AHCI controller.
- //
- Status = AhciIsHcDevicePathValid (DevicePath, DevicePathLength);
- if (EFI_ERROR (Status)) {
- DEBUG ((
- DEBUG_ERROR,
- "%a: The device path is invalid for Controller %d.\n",
- __FUNCTION__,
- Controller
- ));
- Controller++;
- continue;
- }
-
- //
- // For S3 resume performance consideration, not all ports on an ATA AHCI
- // controller will be enumerated/initialized. The driver consumes the
- // content within S3StorageDeviceInitList LockBox to get the ports that
- // will be enumerated/initialized during S3 resume.
- //
- if (BootMode == BOOT_ON_S3_RESUME) {
- NumberOfPorts = AhciS3GetEumeratePorts (DevicePath, DevicePathLength,
&PortBitMap);
- if (NumberOfPorts == 0) {
- //
- // No ports need to be enumerated for this controller.
- //
- Controller++;
- continue;
- }
- } else {
- PortBitMap = MAX_UINT32;
- }
-
- //
- // Memory allocation for controller private data.
- //
- Private = AllocateZeroPool (sizeof (PEI_AHCI_CONTROLLER_PRIVATE_DATA));
- if (Private == NULL) {
- DEBUG ((
- DEBUG_ERROR,
- "%a: Fail to allocate private data for Controller %d.\n",
- __FUNCTION__,
- Controller
- ));
- return EFI_OUT_OF_RESOURCES;
- }
-
- //
- // Initialize controller private data.
- //
- Private->Signature = AHCI_PEI_CONTROLLER_PRIVATE_DATA_SIGNATURE;
- Private->MmioBase = MmioBase;
- Private->DevicePathLength = DevicePathLength;
- Private->DevicePath = DevicePath;
- Private->PortBitMap = PortBitMap;
- InitializeListHead (&Private->DeviceList);
-
- Status = AhciModeInitialization (Private);
+ Status = AtaAhciInitPrivateData (MmioBase, DevicePath, DevicePathLength);
if (EFI_ERROR (Status)) {
DEBUG ((
DEBUG_ERROR,
@@ -260,86 +380,261 @@ AtaAhciPeimEntry (
Controller,
Status
));
- Controller++;
- continue;
- }
-
- Private->AtaPassThruMode.Attributes =
EFI_ATA_PASS_THRU_ATTRIBUTES_PHYSICAL |
- EFI_ATA_PASS_THRU_ATTRIBUTES_LOGICAL;
- Private->AtaPassThruMode.IoAlign = sizeof (UINTN);
- Private->AtaPassThruPpi.Revision =
EDKII_PEI_ATA_PASS_THRU_PPI_REVISION;
- Private->AtaPassThruPpi.Mode = &Private->AtaPassThruMode;
- Private->AtaPassThruPpi.PassThru = AhciAtaPassThruPassThru;
- Private->AtaPassThruPpi.GetNextPort = AhciAtaPassThruGetNextPort;
- Private->AtaPassThruPpi.GetNextDevice = AhciAtaPassThruGetNextDevice;
- Private->AtaPassThruPpi.GetDevicePath = AhciAtaPassThruGetDevicePath;
- CopyMem (
- &Private->AtaPassThruPpiList,
- &mAhciAtaPassThruPpiListTemplate,
- sizeof (EFI_PEI_PPI_DESCRIPTOR)
- );
- Private->AtaPassThruPpiList.Ppi = &Private->AtaPassThruPpi;
- PeiServicesInstallPpi (&Private->AtaPassThruPpiList);
-
- Private->BlkIoPpi.GetNumberOfBlockDevices = AhciBlockIoGetDeviceNo;
- Private->BlkIoPpi.GetBlockDeviceMediaInfo = AhciBlockIoGetMediaInfo;
- Private->BlkIoPpi.ReadBlocks = AhciBlockIoReadBlocks;
- CopyMem (
- &Private->BlkIoPpiList,
- &mAhciBlkIoPpiListTemplate,
- sizeof (EFI_PEI_PPI_DESCRIPTOR)
- );
- Private->BlkIoPpiList.Ppi = &Private->BlkIoPpi;
- PeiServicesInstallPpi (&Private->BlkIoPpiList);
-
- Private->BlkIo2Ppi.Revision =
EFI_PEI_RECOVERY_BLOCK_IO2_PPI_REVISION;
- Private->BlkIo2Ppi.GetNumberOfBlockDevices = AhciBlockIoGetDeviceNo2;
- Private->BlkIo2Ppi.GetBlockDeviceMediaInfo = AhciBlockIoGetMediaInfo2;
- Private->BlkIo2Ppi.ReadBlocks = AhciBlockIoReadBlocks2;
- CopyMem (
- &Private->BlkIo2PpiList,
- &mAhciBlkIo2PpiListTemplate,
- sizeof (EFI_PEI_PPI_DESCRIPTOR)
- );
- Private->BlkIo2PpiList.Ppi = &Private->BlkIo2Ppi;
- PeiServicesInstallPpi (&Private->BlkIo2PpiList);
-
- if (Private->TrustComputingDevices != 0) {
+ } else {
DEBUG ((
DEBUG_INFO,
- "%a: Security Security Command PPI will be produced for Controller
%d.\n",
+ "%a: Controller %d has been successfully initialized.\n",
__FUNCTION__,
Controller
));
- Private->StorageSecurityPpi.Revision =
EDKII_STORAGE_SECURITY_PPI_REVISION;
- Private->StorageSecurityPpi.GetNumberofDevices =
AhciStorageSecurityGetDeviceNo;
- Private->StorageSecurityPpi.GetDevicePath =
AhciStorageSecurityGetDevicePath;
- Private->StorageSecurityPpi.ReceiveData =
AhciStorageSecurityReceiveData;
- Private->StorageSecurityPpi.SendData =
AhciStorageSecuritySendData;
- CopyMem (
- &Private->StorageSecurityPpiList,
- &mAhciStorageSecurityPpiListTemplate,
- sizeof (EFI_PEI_PPI_DESCRIPTOR)
- );
- Private->StorageSecurityPpiList.Ppi = &Private->StorageSecurityPpi;
- PeiServicesInstallPpi (&Private->StorageSecurityPpiList);
}
- CopyMem (
- &Private->EndOfPeiNotifyList,
- &mAhciEndOfPeiNotifyListTemplate,
- sizeof (EFI_PEI_NOTIFY_DESCRIPTOR)
- );
- PeiServicesNotifyPpi (&Private->EndOfPeiNotifyList);
-
- DEBUG ((
- DEBUG_INFO,
- "%a: Controller %d has been successfully initialized.\n",
- __FUNCTION__,
- Controller
- ));
Controller++;
}
return EFI_SUCCESS;
}
+
+/**
+ Callback for EDKII_ATA_AHCI_HOST_CONTROLLER_PPI installation.
+
+ @param[in] PeiServices Pointer to PEI Services Table.
+ @param[in] NotifyDescriptor Pointer to the descriptor for the Notification
+ event that caused this function to execute.
+ @param[in] Ppi Pointer to the PPI data associated with this
function.
+
+ @retval EFI_SUCCESS The function completes successfully
+
+**/
+EFI_STATUS
+EFIAPI
+AtaAhciHostControllerPpiInstallationCallback (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN EFI_PEI_NOTIFY_DESCRIPTOR *NotifyDescriptor,
+ IN VOID *Ppi
+ )
+{
+ EDKII_ATA_AHCI_HOST_CONTROLLER_PPI *AhciHcPpi;
+
+ if (Ppi == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ AhciHcPpi = (EDKII_ATA_AHCI_HOST_CONTROLLER_PPI*) Ppi;
+
+ return AtaAhciInitPrivateDataFromHostControllerPpi (AhciHcPpi);
+}
+
+/**
+ Callback for EDKII_PCI_DEVICE_PPI installation.
+
+ @param[in] PeiServices Pointer to PEI Services Table.
+ @param[in] NotifyDescriptor Pointer to the descriptor for the Notification
+ event that caused this function to execute.
+ @param[in] Ppi Pointer to the PPI data associated with this
function.
+
+ @retval EFI_SUCCESS The function completes successfully
+
+**/
+EFI_STATUS
+EFIAPI
+AtaAhciPciDevicePpiInstallationCallback (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN EFI_PEI_NOTIFY_DESCRIPTOR *NotifyDescriptor,
+ IN VOID *Ppi
+ )
+{
+ EDKII_PCI_DEVICE_PPI *PciDevice;
+ PCI_TYPE00 PciData;
+ UINTN MmioBase;
+ EFI_DEVICE_PATH_PROTOCOL *DevicePath;
+ UINTN DevicePathLength;
+ EFI_STATUS Status;
+
+ PciDevice = (EDKII_PCI_DEVICE_PPI*) Ppi;
+
+ //
+ // Now further check the PCI header: Base Class (offset 0x0B) and
+ // Sub Class (offset 0x0A). This controller should be an SATA controller
+ //
+ Status = PciDevice->PciIo.Pci.Read (
+ &PciDevice->PciIo,
+ EfiPciIoWidthUint8,
+ PCI_CLASSCODE_OFFSET,
+ sizeof (PciData.Hdr.ClassCode),
+ PciData.Hdr.ClassCode
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_UNSUPPORTED;
+ }
+
+ if (!IS_PCI_IDE (&PciData) && !IS_PCI_SATADPA (&PciData)) {
+ return EFI_UNSUPPORTED;
+ }
+
+ Status = PciDevice->PciIo.Attributes (
+ &PciDevice->PciIo,
+ EfiPciIoAttributeOperationSet,
+ EFI_PCI_DEVICE_ENABLE,
+ NULL
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_UNSUPPORTED;
+ }
+
+ Status = PciDevice->PciIo.Pci.Read (
+ &PciDevice->PciIo,
+ EfiPciIoWidthUint32,
+ 0x24,
+ sizeof (UINTN),
+ &MmioBase
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_UNSUPPORTED;
+ }
+
+ DevicePathLength = GetDevicePathSize (PciDevice->DevicePath);
+ DevicePath = PciDevice->DevicePath;
+
+ Status = AtaAhciInitPrivateData (MmioBase, DevicePath, DevicePathLength);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_INFO,
+ "%a: Failed to init controller, with Status - %r\n",
+ __FUNCTION__,
+ Status
+ ));
+ }
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+AtaAhciInitPrivateDataFromPciDevice (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ UINTN ControllerIndex;
+ EDKII_PCI_DEVICE_PPI *PciDevice;
+ PCI_TYPE00 PciData;
+ UINTN MmioBase;
+ EFI_DEVICE_PATH_PROTOCOL *DevicePath;
+ UINTN DevicePathLength;
+
+ Status = EFI_SUCCESS;
+ for (ControllerIndex = 0; Status != EFI_NOT_FOUND; ControllerIndex++ ) {
+ Status = PeiServicesLocatePpi (
+ &gEdkiiPeiPciDevicePpiGuid,
+ ControllerIndex,
+ NULL,
+ (VOID**) &PciDevice
+ );
+ if (EFI_ERROR (Status)) {
+ continue;
+ }
+
+ //
+ // Now further check the PCI header: Base Class (offset 0x0B) and
+ // Sub Class (offset 0x0A). This controller should be an SATA controller
+ //
+ Status = PciDevice->PciIo.Pci.Read (
+ &PciDevice->PciIo,
+ EfiPciIoWidthUint8,
+ PCI_CLASSCODE_OFFSET,
+ sizeof (PciData.Hdr.ClassCode),
+ PciData.Hdr.ClassCode
+ );
+ if (EFI_ERROR (Status)) {
+ continue;
+ }
+
+ if (!IS_PCI_IDE (&PciData) && !IS_PCI_SATADPA (&PciData)) {
+ continue;
+ }
+
+ Status = PciDevice->PciIo.Attributes (
+ &PciDevice->PciIo,
+ EfiPciIoAttributeOperationSet,
+ EFI_PCI_DEVICE_ENABLE,
+ NULL
+ );
+ if (EFI_ERROR (Status)) {
+ continue;
+ }
+
+ Status = PciDevice->PciIo.Pci.Read (
+ &PciDevice->PciIo,
+ EfiPciIoWidthUint32,
+ 0x24,
+ sizeof (UINTN),
+ &MmioBase
+ );
+ if (EFI_ERROR (Status)) {
+ continue;
+ }
+
+ DevicePathLength = GetDevicePathSize (PciDevice->DevicePath);
+ DevicePath = PciDevice->DevicePath;
+
+ Status = AtaAhciInitPrivateData (MmioBase, DevicePath, DevicePathLength);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_INFO,
+ "%a: Failed to init controller, with Status - %r\n",
+ __FUNCTION__,
+ Status
+ ));
+ }
+ //
+ // Override the status to continue the for loop
+ //
+ Status = EFI_SUCCESS;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Entry point of the PEIM.
+
+ @param[in] FileHandle Handle of the file being invoked.
+ @param[in] PeiServices Describes the list of possible PEI Services.
+
+ @retval EFI_SUCCESS PPI successfully installed.
+
+**/
+EFI_STATUS
+EFIAPI
+AtaAhciPeimEntry (
+ IN EFI_PEI_FILE_HANDLE FileHandle,
+ IN CONST EFI_PEI_SERVICES **PeiServices
+ )
+{
+ EFI_STATUS Status;
+ EDKII_ATA_AHCI_HOST_CONTROLLER_PPI *AhciHcPpi;
+
+ DEBUG ((DEBUG_INFO, "%a: Enters.\n", __FUNCTION__));
+
+ PeiServicesNotifyPpi (&mAtaAhciHostControllerNotify);
+
+ PeiServicesNotifyPpi (&mPciDevicePpiNotify);
+
+ Status = AtaAhciInitPrivateDataFromPciDevice ();
+
+ //
+ // Locate the ATA AHCI host controller PPI.
+ //
+ Status = PeiServicesLocatePpi (
+ &gEdkiiPeiAtaAhciHostControllerPpiGuid,
+ 0,
+ NULL,
+ (VOID **)&AhciHcPpi
+ );
+ if (!EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: Using AtaAhciHostControllerPpi to initialize
private data.\n", __FUNCTION__));
+ Status = AtaAhciInitPrivateDataFromHostControllerPpi (AhciHcPpi);
+ }
+
+ return Status;
+}
diff --git a/MdeModulePkg/Bus/Ata/AhciPei/DevicePath.c
b/MdeModulePkg/Bus/Ata/AhciPei/DevicePath.c
index 81f8743d40d8..cf0955929dde 100644
--- a/MdeModulePkg/Bus/Ata/AhciPei/DevicePath.c
+++ b/MdeModulePkg/Bus/Ata/AhciPei/DevicePath.c
@@ -38,50 +38,6 @@ EFI_DEVICE_PATH_PROTOCOL mAhciEndDevicePathNodeTemplate = {
}
};
-/**
- Returns the 16-bit Length field of a device path node.
-
- Returns the 16-bit Length field of the device path node specified by Node.
- Node is not required to be aligned on a 16-bit boundary, so it is recommended
- that a function such as ReadUnaligned16() be used to extract the contents of
- the Length field.
-
- If Node is NULL, then ASSERT().
-
- @param Node A pointer to a device path node data structure.
-
- @return The 16-bit Length field of the device path node specified by Node.
-
-**/
-UINTN
-DevicePathNodeLength (
- IN CONST VOID *Node
- )
-{
- ASSERT (Node != NULL);
- return ReadUnaligned16 ((UINT16 *)&((EFI_DEVICE_PATH_PROTOCOL
*)(Node))->Length[0]);
-}
-
-/**
- Returns a pointer to the next node in a device path.
-
- If Node is NULL, then ASSERT().
-
- @param Node A pointer to a device path node data structure.
-
- @return a pointer to the device path node that follows the device path node
- specified by Node.
-
-**/
-EFI_DEVICE_PATH_PROTOCOL *
-NextDevicePathNode (
- IN CONST VOID *Node
- )
-{
- ASSERT (Node != NULL);
- return (EFI_DEVICE_PATH_PROTOCOL *)((UINT8 *)(Node) + DevicePathNodeLength
(Node));
-}
-
/**
Get the size of the current device path instance.
diff --git a/MdeModulePkg/Bus/Ata/AhciPei/AhciPei.inf
b/MdeModulePkg/Bus/Ata/AhciPei/AhciPei.inf
index 912ff7a8ba4f..788660b33299 100644
--- a/MdeModulePkg/Bus/Ata/AhciPei/AhciPei.inf
+++ b/MdeModulePkg/Bus/Ata/AhciPei/AhciPei.inf
@@ -50,11 +50,13 @@ [LibraryClasses]
TimerLib
LockBoxLib
PeimEntryPoint
+ DevicePathLib
[Ppis]
gEdkiiPeiAtaAhciHostControllerPpiGuid ## CONSUMES
gEdkiiIoMmuPpiGuid ## CONSUMES
gEfiEndOfPeiSignalPpiGuid ## CONSUMES
+ gEdkiiPeiPciDevicePpiGuid ## CONSUMES
gEdkiiPeiAtaPassThruPpiGuid ## SOMETIMES_PRODUCES
gEfiPeiVirtualBlockIoPpiGuid ## SOMETIMES_PRODUCES
gEfiPeiVirtualBlockIo2PpiGuid ## SOMETIMES_PRODUCES
@@ -65,8 +67,7 @@ [Guids]
[Depex]
gEfiPeiMemoryDiscoveredPpiGuid AND
- gEfiPeiMasterBootModePpiGuid AND
- gEdkiiPeiAtaAhciHostControllerPpiGuid
+ gEfiPeiMasterBootModePpiGuid
[UserExtensions.TianoCore."ExtraFiles"]
AhciPeiExtra.uni
--
2.27.0.windows.1
---------------------------------------------------------------------
Intel Technology Poland sp. z o.o.
ul. Slowackiego 173 | 80-298 Gdansk | Sad Rejonowy Gdansk Polnoc | VII Wydzial
Gospodarczy Krajowego Rejestru Sadowego - KRS 101882 | NIP 957-07-52-316 |
Kapital zakladowy 200.000 PLN.
Ta wiadomosc wraz z zalacznikami jest przeznaczona dla okreslonego adresata i
moze zawierac informacje poufne. W razie przypadkowego otrzymania tej
wiadomosci, prosimy o powiadomienie nadawcy oraz trwale jej usuniecie;
jakiekolwiek przegladanie lub rozpowszechnianie jest zabronione.
This e-mail and any attachments may contain confidential material for the sole
use of the intended recipient(s). If you are not the intended recipient, please
contact the sender and delete all copies; any review or distribution by others
is strictly prohibited.
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#90244): https://edk2.groups.io/g/devel/message/90244
Mute This Topic: https://groups.io/mt/91575908/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
