[AMD Official Use Only - General] Reviewed-by: Abner Chang <abner.ch...@amd.com>
> -----Original Message----- > From: Igor Kulchytskyy <ig...@ami.com> > Sent: Thursday, August 11, 2022 4:46 AM > To: devel@edk2.groups.io > Cc: Chang, Abner <abner.ch...@amd.com>; nickle.w...@hpe.com; Igor > Kulchytskyy <ig...@ami.com>; Chang, Abner <abner.ch...@amd.com> > Subject: [PATCH V2] RedfishPkg: Redfish third party modules may need to > use the functions tat are currently private > > [CAUTION: External Email] > > Definitions of the required functions to send requests to BMC are in the > PrivateInclude folder. > So, they cannot be used by the other packages. > > Cc: Abner Chang <abner.ch...@amd.com> > Cc: Nickle Wang <nickle.w...@hpe.com> > Signed-off-by: Igor Kulchytskyy <ig...@ami.com> > --- > RedfishPkg/Include/Library/RedfishLib.h | 616 ++++++++++++++++++++ > RedfishPkg/PrivateInclude/Library/RedfishLib.h | 616 -------------------- > RedfishPkg/RedfishPkg.dec | 2 +- > 3 files changed, 617 insertions(+), 617 deletions(-) > > diff --git a/RedfishPkg/Include/Library/RedfishLib.h > b/RedfishPkg/Include/Library/RedfishLib.h > new file mode 100644 > index 0000000..b2488ab > --- /dev/null > +++ b/RedfishPkg/Include/Library/RedfishLib.h > @@ -0,0 +1,616 @@ > +/** @file > + This library provides a set of utility APIs that allow to > create/read/update/delete > + (CRUD) Redfish resources and provide basic query abilities by using > [URI/RedPath] > + > (https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgith > ub.com%2FDMTF%2Flibredfish&data=05%7C01%7CAbner.Chang%40am > d.com%7C801a31d2d98345b0b56408da7b116295%7C3dd8961fe4884e608e11a > 82d994e183d%7C0%7C0%7C637957611860036068%7CUnknown%7CTWFpbGZ > sb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6M > n0%3D%7C3000%7C%7C%7C&sdata=19FpvKZ8NZ7BTkrZ8CQ34rAMUGj > m0ElwjFyv1eHuVDA%3D&reserved=0). > + > + The query language is based on XPath > (https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fww > w.w3.org%2FTR%2F1999%2FREC-xpath- > 19991116%2F&data=05%7C01%7CAbner.Chang%40amd.com%7C801a31 > d2d98345b0b56408da7b116295%7C3dd8961fe4884e608e11a82d994e183d%7C > 0%7C0%7C637957611860036068%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiM > C4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000 > %7C%7C%7C&sdata=0%2BnenRffAczD19E5fUu%2FT2FkUAQ8OnSGzsm > 0UsEuwKY%3D&reserved=0). > + This library and query language essentially treat the entire Redfish > Service > like it > + was a single JSON document. In other words whenever it encounters an > odata.id in JSON > + document, it will retrieve the new JSON document (if needed). We name > the path as > + RedPath: > + > + Expression Description > + > + nodename Selects the JSON entity with the name "nodename". > + If the value of nodename is an object with "@odata.id", > + it will continue get the value from "@odata.id". > + > + / Selects from the root node > + > + [index] Selects the index number JSON entity from an array or > + object. If the JSON entity is one collection (has > + Members & Members@odata.count), means to get the index > + member in "Members". Index number >=1, 1 means to return > + the first instance. > + > + [XXX] Operation on JSON entity. > + If the JSON entity is one collection (has Members & > + Members@odata.count), means to get all elements in > + "Members". If the JSON entity is one array, means to > + get all elements in array. Others will match the nodename > + directly (e.g. JSON_OBJECT, JSON_STRING, JSON_TRUE, > + JSON_FALSE, JSON_INTEGER). > + > + [nodename] Selects all the elements from an JSON entity that > + contain a property named "nodename" > + > + [name=value] Selects all the elements from an JSON entity where > + the property "name" is equal to "value" > + > + [name~value] Selects all the elements from an JSON entity where > + the string property "name" is equal to "value" using > + case insensitive comparison. > + > + [name<value] Selects all the elements from an JSON entity where > + the property "name" is less than "value" > + > + [name<=value] Selects all the elements from an JSON entity where > + the property "name" is less than or equal to "value" > + > + [name>value] Selects all the elements from an JSON entity where > + the property "name" is greater than "value" > + > + [name>=value] Selects all the elements from an JSON entity where > + the property "name" is greater than or equal to "value" > + > + Some examples: > + > + /v1/Chassis[1] - Will return the first Chassis instance. > + /v1/Chassis[SKU=1234] - Will return all Chassis instances with a SKU > field > equal to 1234. > + /v1/Systems[Storage] - Will return all the System instances that have > Storage field populated. > + > + Copyright (c) 2019, Intel Corporation. All rights reserved.<BR> > + (C) Copyright 2021 Hewlett Packard Enterprise Development LP<BR> > + > + SPDX-License-Identifier: BSD-2-Clause-Patent > + > +**/ > + > +#ifndef REDFISH_LIB_H_ > +#define REDFISH_LIB_H_ > + > +#include <Library/JsonLib.h> > + > +#include <Protocol/Http.h> > +#include <Protocol/EdkIIRedfishConfigHandler.h> > + > +#define ODATA_TYPE_NAME_MAX_SIZE 128 > +#define ODATA_TYPE_MAX_SIZE 128 > + > +/// > +/// Library class public defines > +/// > +typedef VOID *REDFISH_SERVICE; > +typedef VOID *REDFISH_PAYLOAD; > + > +/// > +/// Library class public structures/unions > +/// > +typedef struct { > + EFI_HTTP_STATUS_CODE *StatusCode; > + UINTN HeaderCount; > + EFI_HTTP_HEADER *Headers; > + REDFISH_PAYLOAD Payload; > +} REDFISH_RESPONSE; > + > +/// > +/// Odata type-name mapping structure. > +/// > +typedef struct { > + CONST CHAR8 OdataTypeName[ODATA_TYPE_NAME_MAX_SIZE]; > + CONST CHAR8 OdataType[ODATA_TYPE_MAX_SIZE]; > +} REDFISH_ODATA_TYPE_MAPPING; > + > +/** > + This function uses REST EX protocol provided in RedfishConfigServiceInfo. > + The service enumerator will also handle the authentication flow > automatically > + if HTTP basic auth or Redfish session login is configured to use. > + > + Callers are responsible for freeing the returned service by > RedfishCleanupService(). > + > + @param[in] RedfishConfigServiceInfo Redfish service information the EFI > Redfish > + feature driver communicates with. > + > + @return New created Redfish Service, or NULL if error happens. > + > +**/ > +REDFISH_SERVICE > +EFIAPI > +RedfishCreateService ( > + IN REDFISH_CONFIG_SERVICE_INFORMATION *RedfishConfigServiceInfo > + ); > + > +/** > + Free the Service and all its related resources. > + > + @param[in] RedfishService The Service to access the Redfish > resources. > + > +**/ > +VOID > +EFIAPI > +RedfishCleanupService ( > + IN REDFISH_SERVICE RedfishService > + ); > + > +/** > + Create REDFISH_PAYLOAD instance in local with JSON represented > resource value and > + the Redfish Service. > + > + The returned REDFISH_PAYLOAD can be used to create or update Redfish > resource in > + server side. > + > + Callers are responsible for freeing the returned payload by > RedfishCleanupPayload(). > + > + @param[in] Value JSON Value of the redfish resource. > + @param[in] RedfishService The Service to access the Redfish > resources. > + > + @return REDFISH_PAYLOAD instance of the resource, or NULL if error > happens. > + > +**/ > +REDFISH_PAYLOAD > +EFIAPI > +RedfishCreatePayload ( > + IN EDKII_JSON_VALUE Value, > + IN REDFISH_SERVICE RedfishService > + ); > + > +/** > + Free the RedfishPayload and all its related resources. > + > + @param[in] Payload Payload to be freed. > + > +**/ > +VOID > +EFIAPI > +RedfishCleanupPayload ( > + IN REDFISH_PAYLOAD Payload > + ); > + > +/** > + This function returns the decoded JSON value of a REDFISH_PAYLOAD. > + > + Caller doesn't need to free the returned JSON value because it will be > released > + in corresponding RedfishCleanupPayload() function. > + > + @param[in] Payload A REDFISH_PAYLOAD instance. > + > + @return Decoded JSON value of the payload. > + > +**/ > +EDKII_JSON_VALUE > +EFIAPI > +RedfishJsonInPayload ( > + IN REDFISH_PAYLOAD Payload > + ); > + > +/** > + Fill the input RedPath string with system UUID from SMBIOS table or use > the customized > + ID if FromSmbios == FALSE. > + > + This is a helper function to build a RedPath string which can be used to > address > + a Redfish resource for this computer system. The input PathString must > have a Systems > + note in format of "Systems[UUID=%g]" or "Systems[UUID~%g]" to fill the > UUID value. > + > + Example: > + Use "/v1/Systems[UUID=%g]/Bios" to build a RedPath to address the > "Bios" resource > + for this computer system. > + > + @param[in] RedPath RedPath format to be build. > + @param[in] FromSmbios Get system UUID from SMBIOS as computer > system instance ID. > + @param[in] IdString The computer system instance ID. > + > + @return Full RedPath with system UUID inside, or NULL if error happens. > + > +**/ > +CHAR8 * > +EFIAPI > +RedfishBuildPathWithSystemUuid ( > + IN CONST CHAR8 *RedPath, > + IN BOOLEAN FromSmbios, > + IN CHAR8 *IdString OPTIONAL > + ); > + > +/** > + Get a redfish response addressed by a RedPath string, including HTTP > StatusCode, Headers > + and Payload which record any HTTP response messages. > + > + Callers are responsible for freeing the HTTP StatusCode, Headers and > Payload returned in > + redfish response data. > + > + @param[in] RedfishService The Service to access the Redfish > resources. > + @param[in] RedPath RedPath string to address a resource, > must > start > + from the root node. > + @param[out] RedResponse Pointer to the Redfish response data. > + > + @retval EFI_SUCCESS The opeartion is successful, indicates the > HTTP > StatusCode is not > + NULL and the value is 2XX. The > corresponding redfish > resource has > + been returned in Payload within > RedResponse. > + @retval EFI_INVALID_PARAMETER RedfishService, RedPath, or > RedResponse is NULL. > + @retval EFI_DEVICE_ERROR An unexpected system or network error > occurred. Callers can get > + more error info from returned HTTP > StatusCode, Headers > and Payload > + within RedResponse: > + 1. If the returned Payload is NULL, > indicates any error > happen. > + 2. If the returned StatusCode is NULL, > indicates any error > happen. > + 3. If the returned StatusCode is not 2XX, > indicates any error > happen. > +**/ > +EFI_STATUS > +EFIAPI > +RedfishGetByService ( > + IN REDFISH_SERVICE RedfishService, > + IN CONST CHAR8 *RedPath, > + OUT REDFISH_RESPONSE *RedResponse > + ); > + > +/** > + Get a redfish response addressed by URI, including HTTP StatusCode, > Headers > + and Payload which record any HTTP response messages. > + > + Callers are responsible for freeing the HTTP StatusCode, Headers and > Payload returned in > + redfish response data. > + > + @param[in] RedfishService The Service to access the URI resources. > + @param[in] URI String to address a resource. > + @param[out] RedResponse Pointer to the Redfish response data. > + > + @retval EFI_SUCCESS The opeartion is successful, indicates the > HTTP > StatusCode is not > + NULL and the value is 2XX. The > corresponding redfish > resource has > + been returned in Payload within > RedResponse. > + @retval EFI_INVALID_PARAMETER RedfishService, RedPath, or > RedResponse is NULL. > + @retval EFI_DEVICE_ERROR An unexpected system or network error > occurred. Callers can get > + more error info from returned HTTP > StatusCode, Headers > and Payload > + within RedResponse: > + 1. If the returned Payload is NULL, > indicates any error > happen. > + 2. If the returned StatusCode is NULL, > indicates any error > happen. > + 3. If the returned StatusCode is not 2XX, > indicates any error > happen. > +**/ > +EFI_STATUS > +EFIAPI > +RedfishGetByUri ( > + IN REDFISH_SERVICE RedfishService, > + IN CONST CHAR8 *Uri, > + OUT REDFISH_RESPONSE *RedResponse > + ); > + > +/** > + Get a redfish response addressed by the input Payload and relative > RedPath string, > + including HTTP StatusCode, Headers and Payload which record any HTTP > response messages. > + > + Callers are responsible for freeing the HTTP StatusCode, Headers and > Payload returned in > + redfish response data. > + > + @param[in] Payload A existing REDFISH_PAYLOAD instance. > + @param[in] RedPath Relative RedPath string to address a > resource > inside Payload. > + @param[out] RedResponse Pointer to the Redfish response data. > + > + @retval EFI_SUCCESS The opeartion is successful: > + 1. The HTTP StatusCode is NULL and the > returned Payload > in > + RedResponse is not NULL, indicates the > Redfish resource > has > + been parsed from the input payload > directly. > + 2. The HTTP StatusCode is not NULL and the > value is 2XX, > + indicates the corresponding redfish > resource has been > returned > + in Payload within RedResponse. > + @retval EFI_INVALID_PARAMETER Payload, RedPath, or RedResponse is > NULL. > + @retval EFI_DEVICE_ERROR An unexpected system or network error > occurred. Callers can get > + more error info from returned HTTP > StatusCode, Headers > and Payload > + within RedResponse: > + 1. If the returned Payload is NULL, > indicates any error > happen. > + 2. If StatusCode is not NULL and the > returned value of > StatusCode > + is not 2XX, indicates any error happen. > +**/ > +EFI_STATUS > +EFIAPI > +RedfishGetByPayload ( > + IN REDFISH_PAYLOAD Payload, > + IN CONST CHAR8 *RedPath, > + OUT REDFISH_RESPONSE *RedResponse > + ); > + > +/** > + Use HTTP PATCH to perform updates on pre-existing Redfish resource. > + > + This function uses the RedfishService to patch a Redfish resource > addressed by > + Uri (only the relative path is required). Changes to one or more properties > within > + the target resource are represented in the input Content, properties not > specified > + in Content won't be changed by this request. The corresponding redfish > response will > + returned, including HTTP StatusCode, Headers and Payload which record > any HTTP response > + messages. > + > + Callers are responsible for freeing the HTTP StatusCode, Headers and > Payload returned in > + redfish response data. > + > + @param[in] RedfishService The Service to access the Redfish > resources. > + @param[in] Uri Relative path to address the resource. > + @param[in] Content JSON represented properties to be > update. > + @param[out] RedResponse Pointer to the Redfish response data. > + > + @retval EFI_SUCCESS The opeartion is successful, indicates the > HTTP > StatusCode is not > + NULL and the value is 2XX. The Redfish > resource will be > returned > + in Payload within RedResponse if server > send it back in the > HTTP > + response message body. > + @retval EFI_INVALID_PARAMETER RedfishService, Uri, Content, or > RedResponse is NULL. > + @retval EFI_DEVICE_ERROR An unexpected system or network error > occurred. Callers can get > + more error info from returned HTTP > StatusCode, Headers > and Payload > + within RedResponse: > + 1. If the returned StatusCode is NULL, > indicates any error > happen. > + 2. If the returned StatusCode is not NULL > and the value is > not 2XX, > + indicates any error happen. > +**/ > +EFI_STATUS > +EFIAPI > +RedfishPatchToUri ( > + IN REDFISH_SERVICE RedfishService, > + IN CONST CHAR8 *Uri, > + IN CONST CHAR8 *Content, > + OUT REDFISH_RESPONSE *RedResponse > + ); > + > +/** > + Use HTTP PATCH to perform updates on target payload. Patch to odata.id > in Payload directly. > + > + This function uses the Payload to patch the Target. Changes to one or > more properties > + within the target resource are represented in the input Payload, > properties not specified > + in Payload won't be changed by this request. The corresponding redfish > response will > + returned, including HTTP StatusCode, Headers and Payload which record > any HTTP response > + messages. > + > + Callers are responsible for freeing the HTTP StatusCode, Headers and > Payload returned in > + redfish response data. > + > + @param[in] Target The target payload to be updated. > + @param[in] Payload Palyoad with properties to be changed. > + @param[out] RedResponse Pointer to the Redfish response data. > + > + @retval EFI_SUCCESS The opeartion is successful, indicates the > HTTP > StatusCode is not > + NULL and the value is 2XX. The Redfish > resource will be > returned > + in Payload within RedResponse if server > send it back in the > HTTP > + response message body. > + @retval EFI_INVALID_PARAMETER Target, Payload, or RedResponse is > NULL. > + @retval EFI_DEVICE_ERROR An unexpected system or network error > occurred. Callers can get > + more error info from returned HTTP > StatusCode, Headers > and Payload > + within RedResponse: > + 1. If the returned StatusCode is NULL, > indicates any error > happen. > + 2. If the returned StatusCode is not NULL > and the value is > not 2XX, > + indicates any error happen. > +**/ > +EFI_STATUS > +EFIAPI > +RedfishPatchToPayload ( > + IN REDFISH_PAYLOAD Target, > + IN REDFISH_PAYLOAD Payload, > + OUT REDFISH_RESPONSE *RedResponse > + ); > + > +/** > + Use HTTP POST to create a new resource in target payload. > + > + The POST request should be submitted to the Resource Collection in which > the new resource > + is to belong. The Resource Collection is addressed by Target payload. The > Redfish may > + ignore any service controlled properties. The corresponding redfish > response will returned, > + including HTTP StatusCode, Headers and Payload which record any HTTP > response messages. > + > + Callers are responsible for freeing the HTTP StatusCode, Headers and > Payload returned in > + redfish response data. > + > + @param[in] Target Target payload of the Resource Collection. > + @param[in] Payload The new resource to be created. > + @param[out] RedResponse Pointer to the Redfish response data. > + > + @retval EFI_SUCCESS The opeartion is successful, indicates the > HTTP > StatusCode is not > + NULL and the value is 2XX. The Redfish > resource will be > returned > + in Payload within RedResponse if server > send it back in the > HTTP > + response message body. > + @retval EFI_INVALID_PARAMETER Target, Payload, or RedResponse is > NULL. > + @retval EFI_DEVICE_ERROR An unexpected system or network error > occurred. Callers can get > + more error info from returned HTTP > StatusCode, Headers > and Payload > + within RedResponse: > + 1. If the returned StatusCode is NULL, > indicates any error > happen. > + 2. If the returned StatusCode is not NULL > and the value is > not 2XX, > + indicates any error happen. > +**/ > +EFI_STATUS > +EFIAPI > +RedfishPostToPayload ( > + IN REDFISH_PAYLOAD Target, > + IN REDFISH_PAYLOAD Payload, > + OUT REDFISH_RESPONSE *RedResponse > + ); > + > +/** > + Use HTTP DELETE to remove a resource. > + > + This function uses the RedfishService to remove a Redfish resource which > is addressed > + by input Uri (only the relative path is required). The corresponding > redfish > response will > + returned, including HTTP StatusCode, Headers and Payload which record > any HTTP response > + messages. > + > + Callers are responsible for freeing the HTTP StatusCode, Headers and > Payload returned in > + redfish response data. > + > + @param[in] RedfishService The Service to access the Redfish > resources. > + @param[in] Uri Relative path to address the resource. > + @param[out] RedResponse Pointer to the Redfish response data. > + > + @retval EFI_SUCCESS The opeartion is successful, indicates the > HTTP > StatusCode is not > + NULL and the value is 2XX, the Redfish > resource has been > removed. > + If there is any message returned from > server, it will be > returned > + in Payload within RedResponse. > + @retval EFI_INVALID_PARAMETER RedfishService, Uri, or RedResponse is > NULL. > + @retval EFI_DEVICE_ERROR An unexpected system or network error > occurred. Callers can get > + more error info from returned HTTP > StatusCode, Headers > and Payload > + within RedResponse: > + 1. If the returned StatusCode is NULL, > indicates any error > happen. > + 2. If the returned StatusCode is not NULL > and the value is > not 2XX, > + indicates any error happen. > +**/ > +EFI_STATUS > +EFIAPI > +RedfishDeleteByUri ( > + IN REDFISH_SERVICE RedfishService, > + IN CONST CHAR8 *Uri, > + OUT REDFISH_RESPONSE *RedResponse > + ); > + > +/** > + Dump text in fractions. > + > + @param[in] String ASCII string to dump. > + > +**/ > +VOID > +RedfishDumpJsonStringFractions ( > + IN CHAR8 *String > + ); > + > +/** > + Extract the JSON text content from REDFISH_PAYLOAD and dump to debug > console. > + > + @param[in] Payload The Redfish payload to dump. > + > +**/ > +VOID > +RedfishDumpPayload ( > + IN REDFISH_PAYLOAD Payload > + ); > + > +/** > + Dump text in JSON value. > + > + @param[in] JsonValue The Redfish JSON value to dump. > + > +**/ > +VOID > +RedfishDumpJson ( > + IN EDKII_JSON_VALUE JsonValue > + ); > + > +/** > + This function will cleanup the HTTP header and Redfish payload resources. > + > + @param[in] StatusCode The status code in HTTP response message. > + @param[in] HeaderCount Number of HTTP header structures in > Headers list. > + @param[in] Headers Array containing list of HTTP headers. > + @param[in] Payload The Redfish payload to dump. > + > +**/ > +VOID > +RedfishFreeResponse ( > + IN EFI_HTTP_STATUS_CODE *StatusCode, > + IN UINTN HeaderCount, > + IN EFI_HTTP_HEADER *Headers, > + IN REDFISH_PAYLOAD Payload > + ); > + > +/** > + Check if the "@odata.type" in Payload is valid or not. > + > + @param[in] Payload The Redfish payload to be checked. > + @param[in] OdataTypeName OdataType will be retrived from > mapping list. > + @param[in] OdataTypeMappingList The list of OdataType. > + @param[in] OdataTypeMappingListSize The number of mapping list > + > + @return TRUE if the "@odata.type" in Payload is valid, otherwise FALSE. > + > +**/ > +BOOLEAN > +RedfishIsValidOdataType ( > + IN REDFISH_PAYLOAD Payload, > + IN CONST CHAR8 *OdataTypeName, > + IN REDFISH_ODATA_TYPE_MAPPING *OdataTypeMappingList, > + IN UINTN OdataTypeMappingListSize > + ); > + > +/** > + Check if the payload is collection > + > + @param[in] Payload The Redfish payload to be checked. > + > + @return TRUE if the payload is collection. > + > +**/ > +BOOLEAN > +RedfishIsPayloadCollection ( > + IN REDFISH_PAYLOAD Payload > + ); > + > +/** > + Get collection size. > + > + @param[in] Payload The Redfish collection payload > + @param[in] CollectionSize Size of this collection > + > + @return EFI_SUCCESS Coolection size is returned in > CollectionSize > + @return EFI_INVALID_PARAMETER The payload is not a collection. > +**/ > +EFI_STATUS > +RedfishGetCollectionSize ( > + IN REDFISH_PAYLOAD Payload, > + IN UINTN *CollectionSize > + ); > + > +/** > + Get Redfish payload of collection member > + > + @param[in] Payload The Redfish collection payload > + @param[in] Index Index of collection member > + > + @return NULL Fail to get collection member. > + @return Non NULL Payload is returned. > +**/ > +REDFISH_PAYLOAD > +RedfishGetPayloadByIndex ( > + IN REDFISH_PAYLOAD Payload, > + IN UINTN Index > + ); > + > +/** > + Check and return Redfish resource of the given Redpath. > + > + @param[in] RedfishService Pointer to REDFISH_SERVICE > + @param[in] Redpath Redpath of the resource. > + @param[in] Response Optional return the resource. > + > + @return EFI_STATUS > +**/ > +EFI_STATUS > +RedfishCheckIfRedpathExist ( > + IN REDFISH_SERVICE RedfishService, > + IN CHAR8 *Redpath, > + IN REDFISH_RESPONSE *Response OPTIONAL > + ); > + > +/** > + This function returns the string of Redfish service version. > + > + @param[in] RedfishService Redfish service instance. > + @param[out] ServiceVersionStr Redfish service string. > + > + @return EFI_STATUS > + > +**/ > +EFI_STATUS > +RedfishGetServiceVersion ( > + IN REDFISH_SERVICE RedfishService, > + OUT CHAR8 **ServiceVersionStr > + ); > + > +/** > + This function returns the string of Redfish service version. > + > + @param[in] ServiceVerisonStr The string of Redfish service version. > + @param[in] Url The URL to build Redpath with ID. > + Start with "/", for example "/Registries" > + @param[in] Id ID string > + @param[out] Redpath Pointer to retrive Redpath, caller has to > free > + the memory allocated for this string. > + @return EFI_STATUS > + > +**/ > +EFI_STATUS > +RedfishBuildRedpathUseId ( > + IN CHAR8 *ServiceVerisonStr, > + IN CHAR8 *Url, > + IN CHAR8 *Id, > + OUT CHAR8 **Redpath > + ); > + > +#endif > diff --git a/RedfishPkg/PrivateInclude/Library/RedfishLib.h > b/RedfishPkg/PrivateInclude/Library/RedfishLib.h > deleted file mode 100644 > index b2488ab..0000000 > --- a/RedfishPkg/PrivateInclude/Library/RedfishLib.h > +++ /dev/null > @@ -1,616 +0,0 @@ > -/** @file > - This library provides a set of utility APIs that allow to > create/read/update/delete > - (CRUD) Redfish resources and provide basic query abilities by using > [URI/RedPath] > - > (https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgith > ub.com%2FDMTF%2Flibredfish&data=05%7C01%7CAbner.Chang%40am > d.com%7C801a31d2d98345b0b56408da7b116295%7C3dd8961fe4884e608e11a > 82d994e183d%7C0%7C0%7C637957611860036068%7CUnknown%7CTWFpbGZ > sb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6M > n0%3D%7C3000%7C%7C%7C&sdata=19FpvKZ8NZ7BTkrZ8CQ34rAMUGj > m0ElwjFyv1eHuVDA%3D&reserved=0). > - > - The query language is based on XPath > (https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fww > w.w3.org%2FTR%2F1999%2FREC-xpath- > 19991116%2F&data=05%7C01%7CAbner.Chang%40amd.com%7C801a31 > d2d98345b0b56408da7b116295%7C3dd8961fe4884e608e11a82d994e183d%7C > 0%7C0%7C637957611860192298%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiM > C4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000 > %7C%7C%7C&sdata=YaK50FcrQhX4Fur4DPrh0yoI%2FDwhOKPce3kkNLz > uqRQ%3D&reserved=0). > - This library and query language essentially treat the entire Redfish > Service > like it > - was a single JSON document. In other words whenever it encounters an > odata.id in JSON > - document, it will retrieve the new JSON document (if needed). We name > the path as > - RedPath: > - > - Expression Description > - > - nodename Selects the JSON entity with the name "nodename". > - If the value of nodename is an object with "@odata.id", > - it will continue get the value from "@odata.id". > - > - / Selects from the root node > - > - [index] Selects the index number JSON entity from an array or > - object. If the JSON entity is one collection (has > - Members & Members@odata.count), means to get the index > - member in "Members". Index number >=1, 1 means to return > - the first instance. > - > - [XXX] Operation on JSON entity. > - If the JSON entity is one collection (has Members & > - Members@odata.count), means to get all elements in > - "Members". If the JSON entity is one array, means to > - get all elements in array. Others will match the nodename > - directly (e.g. JSON_OBJECT, JSON_STRING, JSON_TRUE, > - JSON_FALSE, JSON_INTEGER). > - > - [nodename] Selects all the elements from an JSON entity that > - contain a property named "nodename" > - > - [name=value] Selects all the elements from an JSON entity where > - the property "name" is equal to "value" > - > - [name~value] Selects all the elements from an JSON entity where > - the string property "name" is equal to "value" using > - case insensitive comparison. > - > - [name<value] Selects all the elements from an JSON entity where > - the property "name" is less than "value" > - > - [name<=value] Selects all the elements from an JSON entity where > - the property "name" is less than or equal to "value" > - > - [name>value] Selects all the elements from an JSON entity where > - the property "name" is greater than "value" > - > - [name>=value] Selects all the elements from an JSON entity where > - the property "name" is greater than or equal to "value" > - > - Some examples: > - > - /v1/Chassis[1] - Will return the first Chassis instance. > - /v1/Chassis[SKU=1234] - Will return all Chassis instances with a SKU > field > equal to 1234. > - /v1/Systems[Storage] - Will return all the System instances that have > Storage field populated. > - > - Copyright (c) 2019, Intel Corporation. All rights reserved.<BR> > - (C) Copyright 2021 Hewlett Packard Enterprise Development LP<BR> > - > - SPDX-License-Identifier: BSD-2-Clause-Patent > - > -**/ > - > -#ifndef REDFISH_LIB_H_ > -#define REDFISH_LIB_H_ > - > -#include <Library/JsonLib.h> > - > -#include <Protocol/Http.h> > -#include <Protocol/EdkIIRedfishConfigHandler.h> > - > -#define ODATA_TYPE_NAME_MAX_SIZE 128 > -#define ODATA_TYPE_MAX_SIZE 128 > - > -/// > -/// Library class public defines > -/// > -typedef VOID *REDFISH_SERVICE; > -typedef VOID *REDFISH_PAYLOAD; > - > -/// > -/// Library class public structures/unions > -/// > -typedef struct { > - EFI_HTTP_STATUS_CODE *StatusCode; > - UINTN HeaderCount; > - EFI_HTTP_HEADER *Headers; > - REDFISH_PAYLOAD Payload; > -} REDFISH_RESPONSE; > - > -/// > -/// Odata type-name mapping structure. > -/// > -typedef struct { > - CONST CHAR8 OdataTypeName[ODATA_TYPE_NAME_MAX_SIZE]; > - CONST CHAR8 OdataType[ODATA_TYPE_MAX_SIZE]; > -} REDFISH_ODATA_TYPE_MAPPING; > - > -/** > - This function uses REST EX protocol provided in RedfishConfigServiceInfo. > - The service enumerator will also handle the authentication flow > automatically > - if HTTP basic auth or Redfish session login is configured to use. > - > - Callers are responsible for freeing the returned service by > RedfishCleanupService(). > - > - @param[in] RedfishConfigServiceInfo Redfish service information the EFI > Redfish > - feature driver communicates with. > - > - @return New created Redfish Service, or NULL if error happens. > - > -**/ > -REDFISH_SERVICE > -EFIAPI > -RedfishCreateService ( > - IN REDFISH_CONFIG_SERVICE_INFORMATION *RedfishConfigServiceInfo > - ); > - > -/** > - Free the Service and all its related resources. > - > - @param[in] RedfishService The Service to access the Redfish > resources. > - > -**/ > -VOID > -EFIAPI > -RedfishCleanupService ( > - IN REDFISH_SERVICE RedfishService > - ); > - > -/** > - Create REDFISH_PAYLOAD instance in local with JSON represented > resource value and > - the Redfish Service. > - > - The returned REDFISH_PAYLOAD can be used to create or update Redfish > resource in > - server side. > - > - Callers are responsible for freeing the returned payload by > RedfishCleanupPayload(). > - > - @param[in] Value JSON Value of the redfish resource. > - @param[in] RedfishService The Service to access the Redfish > resources. > - > - @return REDFISH_PAYLOAD instance of the resource, or NULL if error > happens. > - > -**/ > -REDFISH_PAYLOAD > -EFIAPI > -RedfishCreatePayload ( > - IN EDKII_JSON_VALUE Value, > - IN REDFISH_SERVICE RedfishService > - ); > - > -/** > - Free the RedfishPayload and all its related resources. > - > - @param[in] Payload Payload to be freed. > - > -**/ > -VOID > -EFIAPI > -RedfishCleanupPayload ( > - IN REDFISH_PAYLOAD Payload > - ); > - > -/** > - This function returns the decoded JSON value of a REDFISH_PAYLOAD. > - > - Caller doesn't need to free the returned JSON value because it will be > released > - in corresponding RedfishCleanupPayload() function. > - > - @param[in] Payload A REDFISH_PAYLOAD instance. > - > - @return Decoded JSON value of the payload. > - > -**/ > -EDKII_JSON_VALUE > -EFIAPI > -RedfishJsonInPayload ( > - IN REDFISH_PAYLOAD Payload > - ); > - > -/** > - Fill the input RedPath string with system UUID from SMBIOS table or use > the customized > - ID if FromSmbios == FALSE. > - > - This is a helper function to build a RedPath string which can be used to > address > - a Redfish resource for this computer system. The input PathString must > have a Systems > - note in format of "Systems[UUID=%g]" or "Systems[UUID~%g]" to fill the > UUID value. > - > - Example: > - Use "/v1/Systems[UUID=%g]/Bios" to build a RedPath to address the > "Bios" resource > - for this computer system. > - > - @param[in] RedPath RedPath format to be build. > - @param[in] FromSmbios Get system UUID from SMBIOS as computer > system instance ID. > - @param[in] IdString The computer system instance ID. > - > - @return Full RedPath with system UUID inside, or NULL if error happens. > - > -**/ > -CHAR8 * > -EFIAPI > -RedfishBuildPathWithSystemUuid ( > - IN CONST CHAR8 *RedPath, > - IN BOOLEAN FromSmbios, > - IN CHAR8 *IdString OPTIONAL > - ); > - > -/** > - Get a redfish response addressed by a RedPath string, including HTTP > StatusCode, Headers > - and Payload which record any HTTP response messages. > - > - Callers are responsible for freeing the HTTP StatusCode, Headers and > Payload returned in > - redfish response data. > - > - @param[in] RedfishService The Service to access the Redfish > resources. > - @param[in] RedPath RedPath string to address a resource, > must > start > - from the root node. > - @param[out] RedResponse Pointer to the Redfish response data. > - > - @retval EFI_SUCCESS The opeartion is successful, indicates the > HTTP > StatusCode is not > - NULL and the value is 2XX. The > corresponding redfish > resource has > - been returned in Payload within > RedResponse. > - @retval EFI_INVALID_PARAMETER RedfishService, RedPath, or > RedResponse is NULL. > - @retval EFI_DEVICE_ERROR An unexpected system or network error > occurred. Callers can get > - more error info from returned HTTP > StatusCode, Headers > and Payload > - within RedResponse: > - 1. If the returned Payload is NULL, > indicates any error > happen. > - 2. If the returned StatusCode is NULL, > indicates any error > happen. > - 3. If the returned StatusCode is not 2XX, > indicates any error > happen. > -**/ > -EFI_STATUS > -EFIAPI > -RedfishGetByService ( > - IN REDFISH_SERVICE RedfishService, > - IN CONST CHAR8 *RedPath, > - OUT REDFISH_RESPONSE *RedResponse > - ); > - > -/** > - Get a redfish response addressed by URI, including HTTP StatusCode, > Headers > - and Payload which record any HTTP response messages. > - > - Callers are responsible for freeing the HTTP StatusCode, Headers and > Payload returned in > - redfish response data. > - > - @param[in] RedfishService The Service to access the URI resources. > - @param[in] URI String to address a resource. > - @param[out] RedResponse Pointer to the Redfish response data. > - > - @retval EFI_SUCCESS The opeartion is successful, indicates the > HTTP > StatusCode is not > - NULL and the value is 2XX. The > corresponding redfish > resource has > - been returned in Payload within > RedResponse. > - @retval EFI_INVALID_PARAMETER RedfishService, RedPath, or > RedResponse is NULL. > - @retval EFI_DEVICE_ERROR An unexpected system or network error > occurred. Callers can get > - more error info from returned HTTP > StatusCode, Headers > and Payload > - within RedResponse: > - 1. If the returned Payload is NULL, > indicates any error > happen. > - 2. If the returned StatusCode is NULL, > indicates any error > happen. > - 3. If the returned StatusCode is not 2XX, > indicates any error > happen. > -**/ > -EFI_STATUS > -EFIAPI > -RedfishGetByUri ( > - IN REDFISH_SERVICE RedfishService, > - IN CONST CHAR8 *Uri, > - OUT REDFISH_RESPONSE *RedResponse > - ); > - > -/** > - Get a redfish response addressed by the input Payload and relative > RedPath string, > - including HTTP StatusCode, Headers and Payload which record any HTTP > response messages. > - > - Callers are responsible for freeing the HTTP StatusCode, Headers and > Payload returned in > - redfish response data. > - > - @param[in] Payload A existing REDFISH_PAYLOAD instance. > - @param[in] RedPath Relative RedPath string to address a > resource > inside Payload. > - @param[out] RedResponse Pointer to the Redfish response data. > - > - @retval EFI_SUCCESS The opeartion is successful: > - 1. The HTTP StatusCode is NULL and the > returned Payload > in > - RedResponse is not NULL, indicates the > Redfish resource > has > - been parsed from the input payload > directly. > - 2. The HTTP StatusCode is not NULL and the > value is 2XX, > - indicates the corresponding redfish > resource has been > returned > - in Payload within RedResponse. > - @retval EFI_INVALID_PARAMETER Payload, RedPath, or RedResponse is > NULL. > - @retval EFI_DEVICE_ERROR An unexpected system or network error > occurred. Callers can get > - more error info from returned HTTP > StatusCode, Headers > and Payload > - within RedResponse: > - 1. If the returned Payload is NULL, > indicates any error > happen. > - 2. If StatusCode is not NULL and the > returned value of > StatusCode > - is not 2XX, indicates any error happen. > -**/ > -EFI_STATUS > -EFIAPI > -RedfishGetByPayload ( > - IN REDFISH_PAYLOAD Payload, > - IN CONST CHAR8 *RedPath, > - OUT REDFISH_RESPONSE *RedResponse > - ); > - > -/** > - Use HTTP PATCH to perform updates on pre-existing Redfish resource. > - > - This function uses the RedfishService to patch a Redfish resource > addressed by > - Uri (only the relative path is required). Changes to one or more properties > within > - the target resource are represented in the input Content, properties not > specified > - in Content won't be changed by this request. The corresponding redfish > response will > - returned, including HTTP StatusCode, Headers and Payload which record > any HTTP response > - messages. > - > - Callers are responsible for freeing the HTTP StatusCode, Headers and > Payload returned in > - redfish response data. > - > - @param[in] RedfishService The Service to access the Redfish > resources. > - @param[in] Uri Relative path to address the resource. > - @param[in] Content JSON represented properties to be > update. > - @param[out] RedResponse Pointer to the Redfish response data. > - > - @retval EFI_SUCCESS The opeartion is successful, indicates the > HTTP > StatusCode is not > - NULL and the value is 2XX. The Redfish > resource will be > returned > - in Payload within RedResponse if server > send it back in the > HTTP > - response message body. > - @retval EFI_INVALID_PARAMETER RedfishService, Uri, Content, or > RedResponse is NULL. > - @retval EFI_DEVICE_ERROR An unexpected system or network error > occurred. Callers can get > - more error info from returned HTTP > StatusCode, Headers > and Payload > - within RedResponse: > - 1. If the returned StatusCode is NULL, > indicates any error > happen. > - 2. If the returned StatusCode is not NULL > and the value is > not 2XX, > - indicates any error happen. > -**/ > -EFI_STATUS > -EFIAPI > -RedfishPatchToUri ( > - IN REDFISH_SERVICE RedfishService, > - IN CONST CHAR8 *Uri, > - IN CONST CHAR8 *Content, > - OUT REDFISH_RESPONSE *RedResponse > - ); > - > -/** > - Use HTTP PATCH to perform updates on target payload. Patch to odata.id in > Payload directly. > - > - This function uses the Payload to patch the Target. Changes to one or more > properties > - within the target resource are represented in the input Payload, properties > not specified > - in Payload won't be changed by this request. The corresponding redfish > response will > - returned, including HTTP StatusCode, Headers and Payload which record > any HTTP response > - messages. > - > - Callers are responsible for freeing the HTTP StatusCode, Headers and > Payload returned in > - redfish response data. > - > - @param[in] Target The target payload to be updated. > - @param[in] Payload Palyoad with properties to be changed. > - @param[out] RedResponse Pointer to the Redfish response data. > - > - @retval EFI_SUCCESS The opeartion is successful, indicates the > HTTP > StatusCode is not > - NULL and the value is 2XX. The Redfish > resource will be > returned > - in Payload within RedResponse if server > send it back in the > HTTP > - response message body. > - @retval EFI_INVALID_PARAMETER Target, Payload, or RedResponse is > NULL. > - @retval EFI_DEVICE_ERROR An unexpected system or network error > occurred. Callers can get > - more error info from returned HTTP > StatusCode, Headers > and Payload > - within RedResponse: > - 1. If the returned StatusCode is NULL, > indicates any error > happen. > - 2. If the returned StatusCode is not NULL > and the value is > not 2XX, > - indicates any error happen. > -**/ > -EFI_STATUS > -EFIAPI > -RedfishPatchToPayload ( > - IN REDFISH_PAYLOAD Target, > - IN REDFISH_PAYLOAD Payload, > - OUT REDFISH_RESPONSE *RedResponse > - ); > - > -/** > - Use HTTP POST to create a new resource in target payload. > - > - The POST request should be submitted to the Resource Collection in which > the new resource > - is to belong. The Resource Collection is addressed by Target payload. The > Redfish may > - ignore any service controlled properties. The corresponding redfish > response will returned, > - including HTTP StatusCode, Headers and Payload which record any HTTP > response messages. > - > - Callers are responsible for freeing the HTTP StatusCode, Headers and > Payload returned in > - redfish response data. > - > - @param[in] Target Target payload of the Resource Collection. > - @param[in] Payload The new resource to be created. > - @param[out] RedResponse Pointer to the Redfish response data. > - > - @retval EFI_SUCCESS The opeartion is successful, indicates the > HTTP > StatusCode is not > - NULL and the value is 2XX. The Redfish > resource will be > returned > - in Payload within RedResponse if server > send it back in the > HTTP > - response message body. > - @retval EFI_INVALID_PARAMETER Target, Payload, or RedResponse is > NULL. > - @retval EFI_DEVICE_ERROR An unexpected system or network error > occurred. Callers can get > - more error info from returned HTTP > StatusCode, Headers > and Payload > - within RedResponse: > - 1. If the returned StatusCode is NULL, > indicates any error > happen. > - 2. If the returned StatusCode is not NULL > and the value is > not 2XX, > - indicates any error happen. > -**/ > -EFI_STATUS > -EFIAPI > -RedfishPostToPayload ( > - IN REDFISH_PAYLOAD Target, > - IN REDFISH_PAYLOAD Payload, > - OUT REDFISH_RESPONSE *RedResponse > - ); > - > -/** > - Use HTTP DELETE to remove a resource. > - > - This function uses the RedfishService to remove a Redfish resource which > is addressed > - by input Uri (only the relative path is required). The corresponding > redfish > response will > - returned, including HTTP StatusCode, Headers and Payload which record > any HTTP response > - messages. > - > - Callers are responsible for freeing the HTTP StatusCode, Headers and > Payload returned in > - redfish response data. > - > - @param[in] RedfishService The Service to access the Redfish > resources. > - @param[in] Uri Relative path to address the resource. > - @param[out] RedResponse Pointer to the Redfish response data. > - > - @retval EFI_SUCCESS The opeartion is successful, indicates the > HTTP > StatusCode is not > - NULL and the value is 2XX, the Redfish > resource has been > removed. > - If there is any message returned from > server, it will be > returned > - in Payload within RedResponse. > - @retval EFI_INVALID_PARAMETER RedfishService, Uri, or RedResponse is > NULL. > - @retval EFI_DEVICE_ERROR An unexpected system or network error > occurred. Callers can get > - more error info from returned HTTP > StatusCode, Headers > and Payload > - within RedResponse: > - 1. If the returned StatusCode is NULL, > indicates any error > happen. > - 2. If the returned StatusCode is not NULL > and the value is > not 2XX, > - indicates any error happen. > -**/ > -EFI_STATUS > -EFIAPI > -RedfishDeleteByUri ( > - IN REDFISH_SERVICE RedfishService, > - IN CONST CHAR8 *Uri, > - OUT REDFISH_RESPONSE *RedResponse > - ); > - > -/** > - Dump text in fractions. > - > - @param[in] String ASCII string to dump. > - > -**/ > -VOID > -RedfishDumpJsonStringFractions ( > - IN CHAR8 *String > - ); > - > -/** > - Extract the JSON text content from REDFISH_PAYLOAD and dump to debug > console. > - > - @param[in] Payload The Redfish payload to dump. > - > -**/ > -VOID > -RedfishDumpPayload ( > - IN REDFISH_PAYLOAD Payload > - ); > - > -/** > - Dump text in JSON value. > - > - @param[in] JsonValue The Redfish JSON value to dump. > - > -**/ > -VOID > -RedfishDumpJson ( > - IN EDKII_JSON_VALUE JsonValue > - ); > - > -/** > - This function will cleanup the HTTP header and Redfish payload resources. > - > - @param[in] StatusCode The status code in HTTP response message. > - @param[in] HeaderCount Number of HTTP header structures in > Headers list. > - @param[in] Headers Array containing list of HTTP headers. > - @param[in] Payload The Redfish payload to dump. > - > -**/ > -VOID > -RedfishFreeResponse ( > - IN EFI_HTTP_STATUS_CODE *StatusCode, > - IN UINTN HeaderCount, > - IN EFI_HTTP_HEADER *Headers, > - IN REDFISH_PAYLOAD Payload > - ); > - > -/** > - Check if the "@odata.type" in Payload is valid or not. > - > - @param[in] Payload The Redfish payload to be checked. > - @param[in] OdataTypeName OdataType will be retrived from > mapping list. > - @param[in] OdataTypeMappingList The list of OdataType. > - @param[in] OdataTypeMappingListSize The number of mapping list > - > - @return TRUE if the "@odata.type" in Payload is valid, otherwise FALSE. > - > -**/ > -BOOLEAN > -RedfishIsValidOdataType ( > - IN REDFISH_PAYLOAD Payload, > - IN CONST CHAR8 *OdataTypeName, > - IN REDFISH_ODATA_TYPE_MAPPING *OdataTypeMappingList, > - IN UINTN OdataTypeMappingListSize > - ); > - > -/** > - Check if the payload is collection > - > - @param[in] Payload The Redfish payload to be checked. > - > - @return TRUE if the payload is collection. > - > -**/ > -BOOLEAN > -RedfishIsPayloadCollection ( > - IN REDFISH_PAYLOAD Payload > - ); > - > -/** > - Get collection size. > - > - @param[in] Payload The Redfish collection payload > - @param[in] CollectionSize Size of this collection > - > - @return EFI_SUCCESS Coolection size is returned in > CollectionSize > - @return EFI_INVALID_PARAMETER The payload is not a collection. > -**/ > -EFI_STATUS > -RedfishGetCollectionSize ( > - IN REDFISH_PAYLOAD Payload, > - IN UINTN *CollectionSize > - ); > - > -/** > - Get Redfish payload of collection member > - > - @param[in] Payload The Redfish collection payload > - @param[in] Index Index of collection member > - > - @return NULL Fail to get collection member. > - @return Non NULL Payload is returned. > -**/ > -REDFISH_PAYLOAD > -RedfishGetPayloadByIndex ( > - IN REDFISH_PAYLOAD Payload, > - IN UINTN Index > - ); > - > -/** > - Check and return Redfish resource of the given Redpath. > - > - @param[in] RedfishService Pointer to REDFISH_SERVICE > - @param[in] Redpath Redpath of the resource. > - @param[in] Response Optional return the resource. > - > - @return EFI_STATUS > -**/ > -EFI_STATUS > -RedfishCheckIfRedpathExist ( > - IN REDFISH_SERVICE RedfishService, > - IN CHAR8 *Redpath, > - IN REDFISH_RESPONSE *Response OPTIONAL > - ); > - > -/** > - This function returns the string of Redfish service version. > - > - @param[in] RedfishService Redfish service instance. > - @param[out] ServiceVersionStr Redfish service string. > - > - @return EFI_STATUS > - > -**/ > -EFI_STATUS > -RedfishGetServiceVersion ( > - IN REDFISH_SERVICE RedfishService, > - OUT CHAR8 **ServiceVersionStr > - ); > - > -/** > - This function returns the string of Redfish service version. > - > - @param[in] ServiceVerisonStr The string of Redfish service version. > - @param[in] Url The URL to build Redpath with ID. > - Start with "/", for example "/Registries" > - @param[in] Id ID string > - @param[out] Redpath Pointer to retrive Redpath, caller has to > free > - the memory allocated for this string. > - @return EFI_STATUS > - > -**/ > -EFI_STATUS > -RedfishBuildRedpathUseId ( > - IN CHAR8 *ServiceVerisonStr, > - IN CHAR8 *Url, > - IN CHAR8 *Id, > - OUT CHAR8 **Redpath > - ); > - > -#endif > diff --git a/RedfishPkg/RedfishPkg.dec b/RedfishPkg/RedfishPkg.dec > index 9886502..0aa2688 100644 > --- a/RedfishPkg/RedfishPkg.dec > +++ b/RedfishPkg/RedfishPkg.dec > @@ -64,7 +64,7 @@ > > ## @libraryclass Redfish Helper Library > # Library provides Redfish helper functions. > - RedfishLib|PrivateInclude/Library/RedfishLib.h > + RedfishLib|Include/Library/RedfishLib.h > > [Protocols] > ## Include/Protocol/EdkIIRedfishCredential.h > -- > 2.6.1.windows.1 > -The information contained in this message may be confidential and > proprietary to American Megatrends (AMI). This communication is intended > to be read only by the individual or entity to whom it is addressed or by > their > designee. If the reader of this message is not the intended recipient, you are > on notice that any distribution of this message, in any form, is strictly > prohibited. Please promptly notify the sender by reply e-mail or by > telephone at 770-246-8600, and then delete or destroy all copies of the > transmission. -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#92386): https://edk2.groups.io/g/devel/message/92386 Mute This Topic: https://groups.io/mt/92945521/21656 Group Owner: devel+ow...@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
