On 2022/12/1 16:34, Yao, Jiewen wrote:
> Thank you!
> 
> Would you please share what test you have run for this patch, such as UEFI 
> secure boot? HTTPS boot?
> 
Hi, Jiewen

We found this problem when importing certification and verifying the expiration 
date(the verifying code is customed), so we only using a X64 board to do the 
test like below:
1. Entering setup page
2. Setting system time to 2038.9.27 19:23
3. Importing a X509 certification, which is valid from 2022.9.27 1:59 to 
2023.9.27 1:59

before merging the patch
the certification can be imported successfully.

after merging the patch
importing failed.
> 
> 
>> -----Original Message-----
>> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of
>> wenyi,xie via groups.io
>> Sent: Friday, November 25, 2022 5:12 PM
>> To: devel@edk2.groups.io; Yao, Jiewen <jiewen....@intel.com>; Wang, Jian
>> J <jian.j.w...@intel.com>; Lu, Xiaoyu1 <xiaoyu1...@intel.com>; Jiang,
>> Guomin <guomin.ji...@intel.com>
>> Cc: songdongku...@huawei.com; xiewen...@huawei.com;
>> yizih...@huawei.com
>> Subject: [edk2-devel] [PATCH EDK2 v1 1/1] CryptoPkg/BaseCryptLib:time
>> overflow
>>
>> From: Zihong Yi <yizih...@huawei.com>
>>
>> REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4167
>>
>> In CrtLibSupport.h, time_t is defined as INT32, and its maximum value
>> is 2147483647. That is, the corresponding maximum timestamp is
>> 2038-01-19 11:14:07. Therefore, overflow occurs when the test time
>> exceeds 2038-01-19 11:14:07. So change the type of time_t to INT64 and
>> also change the type of variables in function gmtime which calculated
>> with time_t.
>>
>> Cc: Jiewen Yao <jiewen....@intel.com>
>> Cc: Jian J Wang <jian.j.w...@intel.com>
>> Cc: Xiaoyu Lu <xiaoyu1...@intel.com>
>> Cc: Guomin Jiang <guomin.ji...@intel.com>
>> Signed-off-by: Zihong Yi <yizih...@huawei.com>
>> ---
>>  CryptoPkg/Library/Include/CrtLibSupport.h             |  2 +-
>>  CryptoPkg/Library/BaseCryptLib/SysCall/TimerWrapper.c | 51
>> ++++++++++++++------
>>  2 files changed, 38 insertions(+), 15 deletions(-)
>>
>> diff --git a/CryptoPkg/Library/Include/CrtLibSupport.h
>> b/CryptoPkg/Library/Include/CrtLibSupport.h
>> index 5072c343da57..94b0e6b6014f 100644
>> --- a/CryptoPkg/Library/Include/CrtLibSupport.h
>> +++ b/CryptoPkg/Library/Include/CrtLibSupport.h
>> @@ -109,7 +109,7 @@ typedef UINTN   off_t;
>>  typedef UINTN   u_int;
>>  typedef INTN    ptrdiff_t;
>>  typedef INTN    ssize_t;
>> -typedef INT32   time_t;
>> +typedef INT64   time_t;
>>  typedef UINT8   __uint8_t;
>>  typedef UINT8   sa_family_t;
>>  typedef UINT8   u_char;
>> diff --git a/CryptoPkg/Library/BaseCryptLib/SysCall/TimerWrapper.c
>> b/CryptoPkg/Library/BaseCryptLib/SysCall/TimerWrapper.c
>> index bf8a5325817f..3ed64375d0ff 100644
>> --- a/CryptoPkg/Library/BaseCryptLib/SysCall/TimerWrapper.c
>> +++ b/CryptoPkg/Library/BaseCryptLib/SysCall/TimerWrapper.c
>> @@ -15,7 +15,6 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
>>  // -- Time Management Routines --
>>  //
>>
>> -#define IsLeap(y)  (((y) % 4) == 0 && (((y) % 100) != 0 || ((y) % 400) == 
>> 0))
>>  #define SECSPERMIN   (60)
>>  #define SECSPERHOUR  (60 * 60)
>>  #define SECSPERDAY   (24 * SECSPERHOUR)
>> @@ -60,6 +59,26 @@ UINTN  CumulativeDays[2][14] = {
>>    }
>>  };
>>
>> +/* Check the year is leap or not. */
>> +// BOOLEAN IsLeap(
>> +//  INTN timer
>> +//  )
>> +BOOLEAN
>> +IsLeap (
>> +  time_t  timer
>> +  )
>> +{
>> +  INT64  Remainder1;
>> +  INT64  Remainder2;
>> +  INT64  Remainder3;
>> +
>> +  DivS64x64Remainder (timer, 4, &Remainder1);
>> +  DivS64x64Remainder (timer, 100, &Remainder2);
>> +  DivS64x64Remainder (timer, 400, &Remainder3);
>> +
>> +  return (Remainder1 == 0 && (Remainder2 != 0 || Remainder3 == 0));
>> +}
>> +
>>  /* Get the system time as seconds elapsed since midnight, January 1, 1970.
>> */
>>  // INTN time(
>>  //  INTN *timer
>> @@ -117,12 +136,13 @@ gmtime (
>>    )
>>  {
>>    struct tm  *GmTime;
>> -  UINT16     DayNo;
>> -  UINT32     DayRemainder;
>> +  UINT64     DayNo;
>> +  UINT64     DayRemainder;
>>    time_t     Year;
>>    time_t     YearNo;
>> -  UINT16     TotalDays;
>> -  UINT16     MonthNo;
>> +  UINT32     TotalDays;
>> +  UINT32     MonthNo;
>> +  INT64      Remainder;
>>
>>    if (timer == NULL) {
>>      return NULL;
>> @@ -135,18 +155,21 @@ gmtime (
>>
>>    ZeroMem ((VOID *)GmTime, (UINTN)sizeof (struct tm));
>>
>> -  DayNo        = (UINT16)(*timer / SECSPERDAY);
>> -  DayRemainder = (UINT32)(*timer % SECSPERDAY);
>> +  DayNo        = (UINT64)DivS64x64Remainder (*timer, SECSPERDAY,
>> &Remainder);
>> +  DayRemainder = (UINT64)Remainder;
>>
>> -  GmTime->tm_sec  = (int)(DayRemainder % SECSPERMIN);
>> -  GmTime->tm_min  = (int)((DayRemainder % SECSPERHOUR) /
>> SECSPERMIN);
>> -  GmTime->tm_hour = (int)(DayRemainder / SECSPERHOUR);
>> -  GmTime->tm_wday = (int)((DayNo + 4) % 7);
>> +  DivS64x64Remainder (DayRemainder, SECSPERMIN, &Remainder);
>> +  GmTime->tm_sec  = (int)Remainder;
>> +  DivS64x64Remainder (DayRemainder, SECSPERHOUR, &Remainder);
>> +  GmTime->tm_min  = (int)DivS64x64Remainder (Remainder, SECSPERMIN,
>> NULL);
>> +  GmTime->tm_hour = (int)DivS64x64Remainder (DayRemainder,
>> SECSPERHOUR, NULL);
>> +  DivS64x64Remainder ((DayNo + 4), 7, &Remainder);
>> +  GmTime->tm_wday = (int)Remainder;
>>
>>    for (Year = 1970, YearNo = 0; DayNo > 0; Year++) {
>> -    TotalDays = (UINT16)(IsLeap (Year) ? 366 : 365);
>> +    TotalDays = (UINT32)(IsLeap (Year) ? 366 : 365);
>>      if (DayNo >= TotalDays) {
>> -      DayNo = (UINT16)(DayNo - TotalDays);
>> +      DayNo = (UINT64)(DayNo - TotalDays);
>>        YearNo++;
>>      } else {
>>        break;
>> @@ -158,7 +181,7 @@ gmtime (
>>
>>    for (MonthNo = 12; MonthNo > 1; MonthNo--) {
>>      if (DayNo >= CumulativeDays[IsLeap (Year)][MonthNo]) {
>> -      DayNo = (UINT16)(DayNo - (UINT16)(CumulativeDays[IsLeap
>> (Year)][MonthNo]));
>> +      DayNo = (UINT64)(DayNo - (UINT32)(CumulativeDays[IsLeap
>> (Year)][MonthNo]));
>>        break;
>>      }
>>    }
>> --
>> 2.20.1.windows.1
>>
>>
>>
>> 
>>
> 
> 
> .
> 


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#96822): https://edk2.groups.io/g/devel/message/96822
Mute This Topic: https://groups.io/mt/95251049/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-


Reply via email to