Added LoongArch64 CPU driver into CpuDxe.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Eric Dong <eric.d...@intel.com>
Cc: Ray Ni <ray...@intel.com>
Cc: Rahul Kumar <rahul1.ku...@intel.com>
Cc: Gerd Hoffmann <kra...@redhat.com>
Signed-off-by: Chao Li <lic...@loongson.cn>
Co-authored-by: Baoqi Zhang <zhangba...@loongson.cn>
Co-authored-by: Dongyan Qian <qiandong...@loongson.cn>
---
UefiCpuPkg/CpuDxe/CpuDxe.inf | 23 +-
UefiCpuPkg/CpuDxe/LoongArch64/CpuDxe.c | 454 ++++++++++++++++++
UefiCpuPkg/CpuDxe/LoongArch64/CpuDxe.h | 288 ++++++++++++
UefiCpuPkg/CpuDxe/LoongArch64/CpuMp.c | 544 ++++++++++++++++++++++
UefiCpuPkg/CpuDxe/LoongArch64/Exception.c | 159 +++++++
5 files changed, 1464 insertions(+), 4 deletions(-)
create mode 100644 UefiCpuPkg/CpuDxe/LoongArch64/CpuDxe.c
create mode 100644 UefiCpuPkg/CpuDxe/LoongArch64/CpuDxe.h
create mode 100644 UefiCpuPkg/CpuDxe/LoongArch64/CpuMp.c
create mode 100644 UefiCpuPkg/CpuDxe/LoongArch64/Exception.c
diff --git a/UefiCpuPkg/CpuDxe/CpuDxe.inf b/UefiCpuPkg/CpuDxe/CpuDxe.inf
index 1d3e9f8cdb..18ebd2eb2c 100644
--- a/UefiCpuPkg/CpuDxe/CpuDxe.inf
+++ b/UefiCpuPkg/CpuDxe/CpuDxe.inf
@@ -3,6 +3,7 @@
#
# Copyright (c) 2008 - 2019, Intel Corporation. All rights reserved.<BR>
# Copyright (c) 2017, AMD Incorporated. All rights reserved.<BR>
+# Copyright (c) 2024, Loongson Technology Corporation Limited. All rights
reserved.<BR>
#
# SPDX-License-Identifier: BSD-2-Clause-Patent
#
@@ -22,17 +23,16 @@
MdeModulePkg/MdeModulePkg.dec
UefiCpuPkg/UefiCpuPkg.dec
-[LibraryClasses]
+[LibraryClasses.common]
BaseLib
BaseMemoryLib
CpuLib
+ CacheMaintenanceLib
DebugLib
DxeServicesTableLib
MemoryAllocationLib
- MtrrLib
UefiBootServicesTableLib
UefiDriverEntryPoint
- LocalApicLib
UefiLib
CpuExceptionHandlerLib
HobLib
@@ -41,7 +41,14 @@
TimerLib
PeCoffGetEntryPointLib
-[Sources]
+[LibraryClasses.IA32, LibraryClasses.X64]
+ LocalApicLib
+ MtrrLib
+
+[LibraryClasses.LoongArch64]
+ CpuMmuLib
+
+[Sources.IA32, Sources.X64]
CpuDxe.c
CpuDxe.h
CpuGdt.c
@@ -59,6 +66,13 @@
X64/CpuAsm.nasm
X64/PagingAttribute.c
+[Sources.LoongArch64]
+ CpuMp.h
+ LoongArch64/CpuDxe.c
+ LoongArch64/CpuMp.c
+ LoongArch64/Exception.c
+ LoongArch64/CpuDxe.h
+
[Protocols]
gEfiCpuArchProtocolGuid ## PRODUCES
gEfiMpServiceProtocolGuid ## PRODUCES
@@ -77,6 +91,7 @@
gEfiMdeModulePkgTokenSpaceGuid.PcdCpuStackGuard ##
CONSUMES
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPropertyMask ##
CONSUMES
gEfiMdeModulePkgTokenSpaceGuid.PcdNullPointerDetectionPropertyMask ##
CONSUMES
+ gUefiCpuPkgTokenSpaceGuid.PcdCpuExceptionVectorBaseAddress ##
CONSUMES
gUefiCpuPkgTokenSpaceGuid.PcdCpuStackSwitchExceptionList ##
CONSUMES
gUefiCpuPkgTokenSpaceGuid.PcdCpuKnownGoodStackSize ##
CONSUMES
gEfiMdeModulePkgTokenSpaceGuid.PcdTdxSharedBitMask ##
CONSUMES
diff --git a/UefiCpuPkg/CpuDxe/LoongArch64/CpuDxe.c
b/UefiCpuPkg/CpuDxe/LoongArch64/CpuDxe.c
new file mode 100644
index 0000000000..65ed0b3913
--- /dev/null
+++ b/UefiCpuPkg/CpuDxe/LoongArch64/CpuDxe.c
@@ -0,0 +1,454 @@
+/** @file CpuDxe.c
+
+ CPU DXE Module to produce CPU ARCH Protocol.
+
+ Copyright (c) 2024, Loongson Technology Corporation Limited. All rights
reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#include "CpuDxe.h"
+#include "CpuMp.h"
+#include <Guid/IdleLoopEvent.h>
+#include <Library/CpuMmuLib.h>
+#include <Library/TimerLib.h>
+#include <Register/LoongArch64/Csr.h>
+
+UINT64 mTimerPeriod = 0;
+
+/**
+ IPI Interrupt Handler.
+
+ @param InterruptType The type of interrupt that occurred
+ @param SystemContext A pointer to the system context when the interrupt
occurred
+**/
+VOID
+EFIAPI
+IpiInterruptHandler (
+ IN EFI_EXCEPTION_TYPE InterruptType,
+ IN EFI_SYSTEM_CONTEXT SystemContext
+ );
+
+//
+// Globals used to initialize the protocol
+//
+EFI_HANDLE mCpuHandle = NULL;
+EFI_CPU_ARCH_PROTOCOL gCpu = {
+ CpuFlushCpuDataCache,
+ CpuEnableInterrupt,
+ CpuDisableInterrupt,
+ CpuGetInterruptState,
+ CpuInit,
+ CpuRegisterInterruptHandler,
+ CpuGetTimerValue,
+ CpuSetMemoryAttributes,
+ 0, // NumberOfTimers
+ 4, // DmaBufferAlignment
+};
+
+/**
+ This function flushes the range of addresses from Start to Start+Length
+ from the processor's data cache. If Start is not aligned to a cache line
+ boundary, then the bytes before Start to the preceding cache line boundary
+ are also flushed. If Start+Length is not aligned to a cache line boundary,
+ then the bytes past Start+Length to the end of the next cache line boundary
+ are also flushed. The FlushType of EfiCpuFlushTypeWriteBackInvalidate must be
+ supported. If the data cache is fully coherent with all DMA operations, then
+ this function can just return EFI_SUCCESS. If the processor does not support
+ flushing a range of the data cache, then the entire data cache can be
flushed.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+ @param Start The beginning physical address to flush from the
processor's data
+ cache.
+ @param Length The number of bytes to flush from the processor's
data cache. This
+ function may flush more bytes than Length specifies
depending upon
+ the granularity of the flush operation that the
processor supports.
+ @param FlushType Specifies the type of flush operation to perform.
+
+ @retval EFI_SUCCESS The address range from Start to Start+Length
was flushed from
+ the processor's data cache.
+ @retval EFI_INVALID_PARAMETER The processor does not support the cache flush
type specified
+ by FlushType.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuFlushCpuDataCache (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN EFI_PHYSICAL_ADDRESS Start,
+ IN UINT64 Length,
+ IN EFI_CPU_FLUSH_TYPE FlushType
+ )
+{
+ switch (FlushType) {
+ case EfiCpuFlushTypeWriteBack:
+ WriteBackDataCacheRange ((VOID *)(UINTN)Start, (UINTN)Length);
+ break;
+ case EfiCpuFlushTypeInvalidate:
+ InvalidateDataCacheRange ((VOID *)(UINTN)Start, (UINTN)Length);
+ break;
+ case EfiCpuFlushTypeWriteBackInvalidate:
+ WriteBackInvalidateDataCacheRange ((VOID *)(UINTN)Start, (UINTN)Length);
+ break;
+ default:
+ return EFI_INVALID_PARAMETER;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ This function enables interrupt processing by the processor.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+
+ @retval EFI_SUCCESS Interrupts are enabled on the processor.
+ @retval EFI_DEVICE_ERROR Interrupts could not be enabled on the
processor.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuEnableInterrupt (
+ IN EFI_CPU_ARCH_PROTOCOL *This
+ )
+{
+ EnableInterrupts ();
+
+ return EFI_SUCCESS;
+}
+
+/**
+ This function disables interrupt processing by the processor.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+
+ @retval EFI_SUCCESS Interrupts are disabled on the processor.
+ @retval EFI_DEVICE_ERROR Interrupts could not be disabled on the
processor.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuDisableInterrupt (
+ IN EFI_CPU_ARCH_PROTOCOL *This
+ )
+{
+ DisableInterrupts ();
+
+ return EFI_SUCCESS;
+}
+
+/**
+ This function retrieves the processor's current interrupt state a returns it
in
+ State. If interrupts are currently enabled, then TRUE is returned. If
interrupts
+ are currently disabled, then FALSE is returned.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+ @param State A pointer to the processor's current interrupt
state. Set to TRUE if
+ interrupts are enabled and FALSE if interrupts are
disabled.
+
+ @retval EFI_SUCCESS The processor's current interrupt state was
returned in State.
+ @retval EFI_INVALID_PARAMETER State is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuGetInterruptState (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ OUT BOOLEAN *State
+ )
+{
+ if (State == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ *State = GetInterruptState ();
+ return EFI_SUCCESS;
+}
+
+/**
+ This function generates an INIT on the processor. If this function succeeds,
then the
+ processor will be reset, and control will not be returned to the caller. If
InitType is
+ not supported by this processor, or the processor cannot programmatically
generate an
+ INIT without help from external hardware, then EFI_UNSUPPORTED is returned.
If an error
+ occurs attempting to generate an INIT, then EFI_DEVICE_ERROR is returned.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+ @param InitType The type of processor INIT to perform.
+
+ @retval EFI_SUCCESS The processor INIT was performed. This return
code should never be seen.
+ @retval EFI_UNSUPPORTED The processor INIT operation specified by
InitType is not supported
+ by this processor.
+ @retval EFI_DEVICE_ERROR The processor INIT failed.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuInit (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN EFI_CPU_INIT_TYPE InitType
+ )
+{
+ return EFI_UNSUPPORTED;
+}
+
+/**
+ Registers a function to be called from the CPU interrupt handler.
+
+ @param This Protocol instance structure
+ @param InterruptType Defines which interrupt to hook. IA-32
+ valid range is 0x00 through 0xFF
+ @param InterruptHandler A pointer to a function of type
+ EFI_CPU_INTERRUPT_HANDLER that is called
+ when a processor interrupt occurs. A null
+ pointer is an error condition.
+
+ @retval EFI_SUCCESS If handler installed or uninstalled.
+ @retval EFI_ALREADY_STARTED InterruptHandler is not NULL, and a handler
+ for InterruptType was previously installed.
+ @retval EFI_INVALID_PARAMETER InterruptHandler is NULL, and a handler for
+ InterruptType was not previously installed.
+ @retval EFI_UNSUPPORTED The interrupt specified by InterruptType
+ is not supported.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuRegisterInterruptHandler (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN EFI_EXCEPTION_TYPE InterruptType,
+ IN EFI_CPU_INTERRUPT_HANDLER InterruptHandler
+ )
+{
+ return RegisterInterruptHandler (InterruptType, InterruptHandler);
+}
+
+/**
+ Returns a timer value from one of the CPU's internal timers. There is no
+ inherent time interval between ticks but is a function of the CPU frequency.
+
+ @param This - Protocol instance structure.
+ @param TimerIndex - Specifies which CPU timer is requested.
+ @param TimerValue - Pointer to the returned timer value.
+ @param TimerPeriod - A pointer to the amount of time that passes
+ in femtoseconds (10-15) for each increment
+ of TimerValue. If TimerValue does not
+ increment at a predictable rate, then 0 is
+ returned. The amount of time that has
+ passed between two calls to GetTimerValue()
+ can be calculated with the formula
+ (TimerValue2 - TimerValue1) * TimerPeriod.
+ This parameter is optional and may be NULL.
+
+ @retval EFI_SUCCESS - If the CPU timer count was returned.
+ @retval EFI_UNSUPPORTED - If the CPU does not have any readable timers.
+ @retval EFI_DEVICE_ERROR - If an error occurred while reading the timer.
+ @retval EFI_INVALID_PARAMETER - TimerIndex is not valid or TimerValue is
NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuGetTimerValue (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN UINT32 TimerIndex,
+ OUT UINT64 *TimerValue,
+ OUT UINT64 *TimerPeriod OPTIONAL
+ )
+{
+ UINT64 BeginValue;
+ UINT64 EndValue;
+
+ if (TimerValue == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (TimerIndex != 0) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ *TimerValue = AsmReadStableCounter ();
+
+ if (TimerPeriod != NULL) {
+ if (mTimerPeriod == 0) {
+ //
+ // Read time stamp counter before and after delay of 100 microseconds
+ //
+ BeginValue = AsmReadStableCounter ();
+ MicroSecondDelay (100);
+ EndValue = AsmReadStableCounter ();
+ //
+ // Calculate the actual frequency
+ //
+ mTimerPeriod = DivU64x64Remainder (
+ MultU64x32 (
+ 1000 * 1000 * 1000,
+ 100
+ ),
+ EndValue - BeginValue,
+ NULL
+ );
+ }
+
+ *TimerPeriod = mTimerPeriod;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ This function modifies the attributes for the memory region specified by
BaseAddress and
+ Length from their current attributes to the attributes specified by
Attributes.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+ @param BaseAddress The physical address that is the start address of a
memory region.
+ @param Length The size in bytes of the memory region.
+ @param EfiAttributes The bit mask of attributes to set for the memory
region.
+
+ @retval EFI_SUCCESS The attributes were set for the memory region.
+ @retval EFI_ACCESS_DENIED The attributes for the memory resource range
specified by
+ BaseAddress and Length cannot be modified.
+ @retval EFI_INVALID_PARAMETER Length is zero.
+ @retval EFI_OUT_OF_RESOURCES There are not enough system resources to
modify the attributes of
+ the memory resource range.
+ @retval EFI_UNSUPPORTED The processor does not support one or more
bytes of the memory
+ resource range specified by BaseAddress and
Length.
+ The bit mask of attributes is not support for
the memory resource
+ range specified by BaseAddress and Length.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuSetMemoryAttributes (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN EFI_PHYSICAL_ADDRESS BaseAddress,
+ IN UINT64 Length,
+ IN UINT64 EfiAttributes
+ )
+{
+ EFI_STATUS Status;
+ UINTN LoongArchAttributes;
+ UINTN RegionBaseAddress;
+ UINTN RegionLength;
+ UINTN RegionLoongArchAttributes;
+
+ RegionLength = Length;
+ Status = EFI_SUCCESS;
+
+ if ((BaseAddress & (EFI_PAGE_SIZE - 1)) != 0) {
+ //
+ // Minimum granularity is SIZE_4KB.
+ //
+ DEBUG ((
+ DEBUG_INFO,
+ "CpuSetMemoryAttributes(%lx, %lx, %lx): Minimum granularity is
SIZE_4KB\n",
+ BaseAddress,
+ Length,
+ EfiAttributes
+ ));
+
+ Status = EFI_UNSUPPORTED;
+
+ return Status;
+ }
+
+ //
+ // Convert the 'Attribute' into LoongArch Attribute
+ //
+ LoongArchAttributes = EfiAttributeConverse (EfiAttributes);
+
+ //
+ // Get the region starting from 'BaseAddress' and its 'Attribute'
+ //
+ RegionBaseAddress = BaseAddress;
+ Status = GetMemoryRegionAttributes (
+ RegionBaseAddress,
+ &RegionLength,
+ &RegionLoongArchAttributes
+ );
+
+ //
+ // Data & Instruction Caches are flushed when we set new memory attributes.
+ // So, we only set the attributes if the new region is different.
+ //
+ if ((Status == EFI_NOT_FOUND) || (RegionLoongArchAttributes !=
LoongArchAttributes) ||
+ ((BaseAddress + Length) > (RegionBaseAddress + RegionLength)))
+ {
+ Status = SetMemoryRegionAttributes (BaseAddress, Length, EfiAttributes,
0x0);
+ }
+
+ ASSERT_EFI_ERROR (Status);
+
+ return Status;
+}
+
+/**
+ Callback function for idle events.
+
+ @param Event Event whose notification function is being
invoked.
+ @param Context The pointer to the notification function's
context,
+ which is implementation-dependent.
+
+**/
+VOID
+EFIAPI
+IdleLoopEventCallback (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ CpuSleep ();
+}
+
+/**
+ Initialize the state information for the CPU Architectural Protocol.
+
+ @param ImageHandle Image handle this driver.
+ @param SystemTable Pointer to the System Table.
+
+ @retval EFI_SUCCESS Thread can be successfully created
+ @retval EFI_OUT_OF_RESOURCES Cannot allocate protocol data structure
+ @retval EFI_DEVICE_ERROR Cannot create the thread
+
+**/
+EFI_STATUS
+InitializeCpu (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ EFI_EVENT IdleLoopEvent;
+
+ InitializeExceptions (&gCpu);
+
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &mCpuHandle,
+ &gEfiCpuArchProtocolGuid,
+ &gCpu,
+ NULL
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ Status = gCpu.RegisterInterruptHandler (
+ &gCpu,
+ EXCEPT_LOONGARCH_INT_IPI,
+ IpiInterruptHandler
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ //
+ // Setup a callback for idle events
+ //
+ Status = gBS->CreateEventEx (
+ EVT_NOTIFY_SIGNAL,
+ TPL_NOTIFY,
+ IdleLoopEventCallback,
+ NULL,
+ &gIdleLoopEventGuid,
+ &IdleLoopEvent
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ InitializeMpSupport ();
+
+ return Status;
+}
diff --git a/UefiCpuPkg/CpuDxe/LoongArch64/CpuDxe.h
b/UefiCpuPkg/CpuDxe/LoongArch64/CpuDxe.h
new file mode 100644
index 0000000000..8bfbfa3442
--- /dev/null
+++ b/UefiCpuPkg/CpuDxe/LoongArch64/CpuDxe.h
@@ -0,0 +1,288 @@
+/** @file CpuDxe.c
+
+ CPU DXE Module to produce CPU ARCH Protocol.
+
+ Copyright (c) 2024, Loongson Technology Corporation Limited. All rights
reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef CPU_DXE_H_
+#define CPU_DXE_H_
+
+#include <Uefi.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/CacheMaintenanceLib.h>
+#include <Library/CpuLib.h>
+#include <Library/DebugLib.h>
+#include <Library/DxeServicesTableLib.h>
+#include <Library/MpInitLib.h>
+#include <Library/PcdLib.h>
+#include <Library/PeCoffGetEntryPointLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiLib.h>
+
+#include <Guid/DebugImageInfoTable.h>
+#include <Protocol/Cpu.h>
+#include <Protocol/DebugSupport.h>
+#include <Protocol/LoadedImage.h>
+
+//
+// For coding convenience, define the maximum valid
+// LoongArch exception.
+// Since UEFI V2.11, it will be present in DebugSupport.h.
+//
+#define MAX_LOONGARCH_EXCEPTION 64
+
+/*
+ This function flushes the range of addresses from Start to Start+Length
+ from the processor's data cache. If Start is not aligned to a cache line
+ boundary, then the bytes before Start to the preceding cache line boundary
+ are also flushed. If Start+Length is not aligned to a cache line boundary,
+ then the bytes past Start+Length to the end of the next cache line boundary
+ are also flushed. The FlushType of EfiCpuFlushTypeWriteBackInvalidate must be
+ supported. If the data cache is fully coherent with all DMA operations, then
+ this function can just return EFI_SUCCESS. If the processor does not support
+ flushing a range of the data cache, then the entire data cache can be
flushed.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+ @param Start The beginning physical address to flush from the
processor's data
+ cache.
+ @param Length The number of bytes to flush from the processor's
data cache. This
+ function may flush more bytes than Length specifies
depending upon
+ the granularity of the flush operation that the
processor supports.
+ @param FlushType Specifies the type of flush operation to perform.
+
+ @retval EFI_SUCCESS The address range from Start to Start+Length
was flushed from
+ the processor's data cache.
+ @retval EFI_UNSUPPORTEDT The processor does not support the cache flush
type specified
+ by FlushType.
+ @retval EFI_DEVICE_ERROR The address range from Start to Start+Length
could not be flushed
+ from the processor's data cache.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuFlushCpuDataCache (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN EFI_PHYSICAL_ADDRESS Start,
+ IN UINT64 Length,
+ IN EFI_CPU_FLUSH_TYPE FlushType
+ );
+
+/**
+ This function enables interrupt processing by the processor.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+
+ @retval EFI_SUCCESS Interrupts are enabled on the processor.
+ @retval EFI_DEVICE_ERROR Interrupts could not be enabled on the
processor.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuEnableInterrupt (
+ IN EFI_CPU_ARCH_PROTOCOL *This
+ );
+
+/**
+ This function disables interrupt processing by the processor.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+
+ @retval EFI_SUCCESS Interrupts are disabled on the processor.
+ @retval EFI_DEVICE_ERROR Interrupts could not be disabled on the
processor.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuDisableInterrupt (
+ IN EFI_CPU_ARCH_PROTOCOL *This
+ );
+
+/**
+ This function retrieves the processor's current interrupt state a returns it
in
+ State. If interrupts are currently enabled, then TRUE is returned. If
interrupts
+ are currently disabled, then FALSE is returned.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+ @param State A pointer to the processor's current interrupt
state. Set to TRUE if
+ interrupts are enabled and FALSE if interrupts are
disabled.
+
+ @retval EFI_SUCCESS The processor's current interrupt state was
returned in State.
+ @retval EFI_INVALID_PARAMETER State is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuGetInterruptState (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ OUT BOOLEAN *State
+ );
+
+/**
+ This function generates an INIT on the processor. If this function succeeds,
then the
+ processor will be reset, and control will not be returned to the caller. If
InitType is
+ not supported by this processor, or the processor cannot programmatically
generate an
+ INIT without help from external hardware, then EFI_UNSUPPORTED is returned.
If an error
+ occurs attempting to generate an INIT, then EFI_DEVICE_ERROR is returned.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+ @param InitType The type of processor INIT to perform.
+
+ @retval EFI_SUCCESS The processor INIT was performed. This return
code should never be seen.
+ @retval EFI_UNSUPPORTED The processor INIT operation specified by
InitType is not supported
+ by this processor.
+ @retval EFI_DEVICE_ERROR The processor INIT failed.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuInit (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN EFI_CPU_INIT_TYPE InitType
+ );
+
+/**
+ Registers a function to be called from the CPU interrupt handler.
+
+ @param This Protocol instance structure
+ @param InterruptType Defines which interrupt to hook. IA-32
+ valid range is 0x00 through 0xFF
+ @param InterruptHandler A pointer to a function of type
+ EFI_CPU_INTERRUPT_HANDLER that is called
+ when a processor interrupt occurs. A null
+ pointer is an error condition.
+
+ @retval EFI_SUCCESS If handler installed or uninstalled.
+ @retval EFI_ALREADY_STARTED InterruptHandler is not NULL, and a handler
+ for InterruptType was previously installed.
+ @retval EFI_INVALID_PARAMETER InterruptHandler is NULL, and a handler for
+ InterruptType was not previously installed.
+ @retval EFI_UNSUPPORTED The interrupt specified by InterruptType
+ is not supported.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuRegisterInterruptHandler (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN EFI_EXCEPTION_TYPE InterruptType,
+ IN EFI_CPU_INTERRUPT_HANDLER InterruptHandler
+ );
+
+/**
+ Returns a timer value from one of the CPU's internal timers. There is no
+ inherent time interval between ticks but is a function of the CPU frequency.
+
+ @param This - Protocol instance structure.
+ @param TimerIndex - Specifies which CPU timer is requested.
+ @param TimerValue - Pointer to the returned timer value.
+ @param TimerPeriod - A pointer to the amount of time that passes
+ in femtoseconds (10-15) for each increment
+ of TimerValue. If TimerValue does not
+ increment at a predictable rate, then 0 is
+ returned. The amount of time that has
+ passed between two calls to GetTimerValue()
+ can be calculated with the formula
+ (TimerValue2 - TimerValue1) * TimerPeriod.
+ This parameter is optional and may be NULL.
+
+ @retval EFI_SUCCESS - If the CPU timer count was returned.
+ @retval EFI_UNSUPPORTED - If the CPU does not have any readable timers.
+ @retval EFI_DEVICE_ERROR - If an error occurred while reading the timer.
+ @retval EFI_INVALID_PARAMETER - TimerIndex is not valid or TimerValue is
NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuGetTimerValue (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN UINT32 TimerIndex,
+ OUT UINT64 *TimerValue,
+ OUT UINT64 *TimerPeriod OPTIONAL
+ );
+
+/**
+ This function registers and enables the handler specified by
InterruptHandler for a processor
+ interrupt or exception type specified by InterruptType. If InterruptHandler
is NULL, then the
+ handler for the processor interrupt or exception type specified by
InterruptType is uninstalled.
+ The installed handler is called once for each processor interrupt or
exception.
+
+ @param InterruptType A pointer to the processor's current interrupt
state. Set to TRUE if interrupts
+ are enabled and FALSE if interrupts are disabled.
+ @param InterruptHandler A pointer to a function of type
EFI_CPU_INTERRUPT_HANDLER that is called
+ when a processor interrupt occurs. If this
parameter is NULL, then the handler
+ will be uninstalled.
+
+ @retval EFI_SUCCESS The handler for the processor interrupt was
successfully installed or uninstalled.
+ @retval EFI_ALREADY_STARTED InterruptHandler is not NULL, and a handler
for InterruptType was
+ previously installed.
+ @retval EFI_INVALID_PARAMETER InterruptHandler is NULL, and a handler for
InterruptType was not
+ previously installed.
+ @retval EFI_UNSUPPORTED The interrupt specified by InterruptType is
not supported.
+
+**/
+EFI_STATUS
+RegisterInterruptHandler (
+ IN EFI_EXCEPTION_TYPE InterruptType,
+ IN EFI_CPU_INTERRUPT_HANDLER InterruptHandler
+ );
+
+/**
+ This function modifies the attributes for the memory region specified by
BaseAddress and
+ Length from their current attributes to the attributes specified by
Attributes.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+ @param BaseAddress The physical address that is the start address of a
memory region.
+ @param Length The size in bytes of the memory region.
+ @param Attributes The bit mask of attributes to set for the memory
region.
+
+ @retval EFI_SUCCESS The attributes were set for the memory region.
+ @retval EFI_ACCESS_DENIED The attributes for the memory resource range
specified by
+ BaseAddress and Length cannot be modified.
+ @retval EFI_INVALID_PARAMETER Length is zero.
+ @retval EFI_OUT_OF_RESOURCES There are not enough system resources to
modify the attributes of
+ the memory resource range.
+ @retval EFI_UNSUPPORTED The processor does not support one or more
bytes of the memory
+ resource range specified by BaseAddress and
Length.
+ The bit mask of attributes is not support for
the memory resource
+ range specified by BaseAddress and Length.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuSetMemoryAttributes (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN EFI_PHYSICAL_ADDRESS BaseAddress,
+ IN UINT64 Length,
+ IN UINT64 Attributes
+ );
+
+/**
+ Initialize interrupt handling for DXE phase.
+
+ @param Cpu A pointer of EFI_CPU_ARCH_PROTOCOL instance.
+
+ @return VOID.
+
+**/
+VOID
+InitializeExceptions (
+ IN EFI_CPU_ARCH_PROTOCOL *gCpu
+ );
+
+/**
+ Converts EFI Attributes to corresponding architecture Attributes.
+
+ @param[in] EfiAttributes Efi Attributes.
+
+ @retval Corresponding architecture attributes.
+**/
+UINTN
+EFIAPI
+EfiAttributeConverse (
+ IN UINTN EfiAttributes
+ );
+
+#endif // CPU_DXE_H_
diff --git a/UefiCpuPkg/CpuDxe/LoongArch64/CpuMp.c
b/UefiCpuPkg/CpuDxe/LoongArch64/CpuMp.c
new file mode 100644
index 0000000000..3325914e53
--- /dev/null
+++ b/UefiCpuPkg/CpuDxe/LoongArch64/CpuMp.c
@@ -0,0 +1,544 @@
+/** @file
+ CPU DXE Module to produce CPU MP Protocol.
+
+ Copyright (c) 2024, Loongson Technology Corporation Limited. All rights
reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#include "CpuDxe.h"
+#include "CpuMp.h"
+
+EFI_HANDLE mMpServiceHandle = NULL;
+UINTN mNumberOfProcessors = 1;
+
+EFI_MP_SERVICES_PROTOCOL mMpServicesTemplate = {
+ GetNumberOfProcessors,
+ GetProcessorInfo,
+ StartupAllAPs,
+ StartupThisAP,
+ SwitchBSP,
+ EnableDisableAP,
+ WhoAmI
+};
+
+/**
+ This service retrieves the number of logical processor in the platform
+ and the number of those logical processors that are enabled on this boot.
+ This service may only be called from the BSP.
+
+ This function is used to retrieve the following information:
+ - The number of logical processors that are present in the system.
+ - The number of enabled logical processors in the system at the instant
+ this call is made.
+
+ Because MP Service Protocol provides services to enable and disable
processors
+ dynamically, the number of enabled logical processors may vary during the
+ course of a boot session.
+
+ If this service is called from an AP, then EFI_DEVICE_ERROR is returned.
+ If NumberOfProcessors or NumberOfEnabledProcessors is NULL, then
+ EFI_INVALID_PARAMETER is returned. Otherwise, the total number of processors
+ is returned in NumberOfProcessors, the number of currently enabled processor
+ is returned in NumberOfEnabledProcessors, and EFI_SUCCESS is returned.
+
+ @param[in] This A pointer to the
EFI_MP_SERVICES_PROTOCOL
+ instance.
+ @param[out] NumberOfProcessors Pointer to the total number of
logical
+ processors in the system, including
the BSP
+ and disabled APs.
+ @param[out] NumberOfEnabledProcessors Pointer to the number of enabled
logical
+ processors that exist in system,
including
+ the BSP.
+
+ @retval EFI_SUCCESS The number of logical processors and enabled
+ logical processors was retrieved.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_INVALID_PARAMETER NumberOfProcessors is NULL.
+ @retval EFI_INVALID_PARAMETER NumberOfEnabledProcessors is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+GetNumberOfProcessors (
+ IN EFI_MP_SERVICES_PROTOCOL *This,
+ OUT UINTN *NumberOfProcessors,
+ OUT UINTN *NumberOfEnabledProcessors
+ )
+{
+ if ((NumberOfProcessors == NULL) || (NumberOfEnabledProcessors == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ return MpInitLibGetNumberOfProcessors (
+ NumberOfProcessors,
+ NumberOfEnabledProcessors
+ );
+}
+
+/**
+ Gets detailed MP-related information on the requested processor at the
+ instant this call is made. This service may only be called from the BSP.
+
+ This service retrieves detailed MP-related information about any processor
+ on the platform. Note the following:
+ - The processor information may change during the course of a boot session.
+ - The information presented here is entirely MP related.
+
+ Information regarding the number of caches and their sizes, frequency of
operation,
+ slot numbers is all considered platform-related information and is not
provided
+ by this service.
+
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL
+ instance.
+ @param[in] ProcessorNumber The handle number of processor.
+ @param[out] ProcessorInfoBuffer A pointer to the buffer where information
for
+ the requested processor is deposited.
+
+ @retval EFI_SUCCESS Processor information was returned.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_INVALID_PARAMETER ProcessorInfoBuffer is NULL.
+ @retval EFI_NOT_FOUND The processor with the handle specified by
+ ProcessorNumber does not exist in the
platform.
+
+**/
+EFI_STATUS
+EFIAPI
+GetProcessorInfo (
+ IN EFI_MP_SERVICES_PROTOCOL *This,
+ IN UINTN ProcessorNumber,
+ OUT EFI_PROCESSOR_INFORMATION *ProcessorInfoBuffer
+ )
+{
+ return MpInitLibGetProcessorInfo (ProcessorNumber, ProcessorInfoBuffer,
NULL);
+}
+
+/**
+ This service executes a caller provided function on all enabled APs. APs can
+ run either simultaneously or one at a time in sequence. This service supports
+ both blocking and non-blocking requests. The non-blocking requests use EFI
+ events so the BSP can detect when the APs have finished. This service may
only
+ be called from the BSP.
+
+ This function is used to dispatch all the enabled APs to the function
specified
+ by Procedure. If any enabled AP is busy, then EFI_NOT_READY is returned
+ immediately and Procedure is not started on any AP.
+
+ If SingleThread is TRUE, all the enabled APs execute the function specified
by
+ Procedure one by one, in ascending order of processor handle number.
Otherwise,
+ all the enabled APs execute the function specified by Procedure
simultaneously.
+
+ If WaitEvent is NULL, execution is in blocking mode. The BSP waits until all
+ APs finish or TimeoutInMicroseconds expires. Otherwise, execution is in
non-blocking
+ mode, and the BSP returns from this service without waiting for APs. If a
+ non-blocking mode is requested after the UEFI Event
EFI_EVENT_GROUP_READY_TO_BOOT
+ is signaled, then EFI_UNSUPPORTED must be returned.
+
+ If the timeout specified by TimeoutInMicroseconds expires before all APs
return
+ from Procedure, then Procedure on the failed APs is terminated. All enabled
APs
+ are always available for further calls to
EFI_MP_SERVICES_PROTOCOL.StartupAllAPs()
+ and EFI_MP_SERVICES_PROTOCOL.StartupThisAP(). If FailedCpuList is not NULL,
its
+ content points to the list of processor handle numbers in which Procedure was
+ terminated.
+
+ Note: It is the responsibility of the consumer of the
EFI_MP_SERVICES_PROTOCOL.StartupAllAPs()
+ to make sure that the nature of the code that is executed on the BSP and the
+ dispatched APs is well controlled. The MP Services Protocol does not
guarantee
+ that the Procedure function is MP-safe. Hence, the tasks that can be run in
+ parallel are limited to certain independent tasks and well-controlled
exclusive
+ code. EFI services and protocols may not be called by APs unless otherwise
+ specified.
+
+ In blocking execution mode, BSP waits until all APs finish or
+ TimeoutInMicroseconds expires.
+
+ In non-blocking execution mode, BSP is freed to return to the caller and then
+ proceed to the next task without having to wait for APs. The following
+ sequence needs to occur in a non-blocking execution mode:
+
+ -# The caller that intends to use this MP Services Protocol in non-blocking
+ mode creates WaitEvent by calling the EFI CreateEvent() service. The
caller
+ invokes EFI_MP_SERVICES_PROTOCOL.StartupAllAPs(). If the parameter
WaitEvent
+ is not NULL, then StartupAllAPs() executes in non-blocking mode. It
requests
+ the function specified by Procedure to be started on all the enabled
APs,
+ and releases the BSP to continue with other tasks.
+ -# The caller can use the CheckEvent() and WaitForEvent() services to check
+ the state of the WaitEvent created in step 1.
+ -# When the APs complete their task or TimeoutInMicroSecondss expires, the
MP
+ Service signals WaitEvent by calling the EFI SignalEvent() function. If
+ FailedCpuList is not NULL, its content is available when WaitEvent is
+ signaled. If all APs returned from Procedure prior to the timeout, then
+ FailedCpuList is set to NULL. If not all APs return from Procedure
before
+ the timeout, then FailedCpuList is filled in with the list of the failed
+ APs. The buffer is allocated by MP Service Protocol using
AllocatePool().
+ It is the caller's responsibility to free the buffer with FreePool()
service.
+ -# This invocation of SignalEvent() function informs the caller that
invoked
+ EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() that either all the APs
completed
+ the specified task or a timeout occurred. The contents of FailedCpuList
+ can be examined to determine which APs did not complete the specified
task
+ prior to the timeout.
+
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL
+ instance.
+ @param[in] Procedure A pointer to the function to be run on
+ enabled APs of the system. See type
+ EFI_AP_PROCEDURE.
+ @param[in] SingleThread If TRUE, then all the enabled APs execute
+ the function specified by Procedure one
by
+ one, in ascending order of processor
handle
+ number. If FALSE, then all the enabled
APs
+ execute the function specified by
Procedure
+ simultaneously.
+ @param[in] WaitEvent The event created by the caller with
CreateEvent()
+ service. If it is NULL, then execute in
+ blocking mode. BSP waits until all APs
finish
+ or TimeoutInMicroseconds expires. If
it's
+ not NULL, then execute in non-blocking
mode.
+ BSP requests the function specified by
+ Procedure to be started on all the
enabled
+ APs, and go on executing immediately. If
+ all return from Procedure, or
TimeoutInMicroseconds
+ expires, this event is signaled. The BSP
+ can use the CheckEvent() or
WaitForEvent()
+ services to check the state of event.
Type
+ EFI_EVENT is defined in CreateEvent() in
+ the Unified Extensible Firmware Interface
+ Specification.
+ @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds
for
+ APs to return from Procedure, either for
+ blocking or non-blocking mode. Zero means
+ infinity. If the timeout expires before
+ all APs return from Procedure, then
Procedure
+ on the failed APs is terminated. All
enabled
+ APs are available for next function
assigned
+ by
EFI_MP_SERVICES_PROTOCOL.StartupAllAPs()
+ or
EFI_MP_SERVICES_PROTOCOL.StartupThisAP().
+ If the timeout expires in blocking mode,
+ BSP returns EFI_TIMEOUT. If the timeout
+ expires in non-blocking mode, WaitEvent
+ is signaled with SignalEvent().
+ @param[in] ProcedureArgument The parameter passed into Procedure for
+ all APs.
+ @param[out] FailedCpuList If NULL, this parameter is ignored.
Otherwise,
+ if all APs finish successfully, then its
+ content is set to NULL. If not all APs
+ finish before timeout expires, then its
+ content is set to address of the buffer
+ holding handle numbers of the failed APs.
+ The buffer is allocated by MP Service
Protocol,
+ and it's the caller's responsibility to
+ free the buffer with FreePool() service.
+ In blocking mode, it is ready for
consumption
+ when the call returns. In non-blocking
mode,
+ it is ready when WaitEvent is signaled.
The
+ list of failed CPU is terminated by
+ END_OF_CPU_LIST.
+
+ @retval EFI_SUCCESS In blocking mode, all APs have finished
before
+ the timeout expired.
+ @retval EFI_SUCCESS In non-blocking mode, function has been
dispatched
+ to all enabled APs.
+ @retval EFI_UNSUPPORTED A non-blocking mode request was made after
the
+ UEFI event EFI_EVENT_GROUP_READY_TO_BOOT was
+ signaled.
+ @retval EFI_DEVICE_ERROR Caller processor is AP.
+ @retval EFI_NOT_STARTED No enabled APs exist in the system.
+ @retval EFI_NOT_READY Any enabled APs are busy.
+ @retval EFI_TIMEOUT In blocking mode, the timeout expired before
+ all enabled APs have finished.
+ @retval EFI_INVALID_PARAMETER Procedure is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+StartupAllAPs (
+ IN EFI_MP_SERVICES_PROTOCOL *This,
+ IN EFI_AP_PROCEDURE Procedure,
+ IN BOOLEAN SingleThread,
+ IN EFI_EVENT WaitEvent OPTIONAL,
+ IN UINTN TimeoutInMicroseconds,
+ IN VOID *ProcedureArgument OPTIONAL,
+ OUT UINTN **FailedCpuList OPTIONAL
+ )
+{
+ return MpInitLibStartupAllAPs (
+ Procedure,
+ SingleThread,
+ WaitEvent,
+ TimeoutInMicroseconds,
+ ProcedureArgument,
+ FailedCpuList
+ );
+}
+
+/**
+ This service lets the caller get one enabled AP to execute a caller-provided
+ function. The caller can request the BSP to either wait for the completion
+ of the AP or just proceed with the next task by using the EFI event
mechanism.
+ See EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() for more details on non-blocking
+ execution support. This service may only be called from the BSP.
+
+ This function is used to dispatch one enabled AP to the function specified by
+ Procedure passing in the argument specified by ProcedureArgument. If
WaitEvent
+ is NULL, execution is in blocking mode. The BSP waits until the AP finishes
or
+ TimeoutInMicroSecondss expires. Otherwise, execution is in non-blocking mode.
+ BSP proceeds to the next task without waiting for the AP. If a non-blocking
mode
+ is requested after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT is signaled,
+ then EFI_UNSUPPORTED must be returned.
+
+ If the timeout specified by TimeoutInMicroseconds expires before the AP
returns
+ from Procedure, then execution of Procedure by the AP is terminated. The AP
is
+ available for subsequent calls to EFI_MP_SERVICES_PROTOCOL.StartupAllAPs()
and
+ EFI_MP_SERVICES_PROTOCOL.StartupThisAP().
+
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL
+ instance.
+ @param[in] Procedure A pointer to the function to be run on
the
+ designated AP of the system. See type
+ EFI_AP_PROCEDURE.
+ @param[in] ProcessorNumber The handle number of the AP. The range is
+ from 0 to the total number of logical
+ processors minus 1. The total number of
+ logical processors can be retrieved by
+
EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors().
+ @param[in] WaitEvent The event created by the caller with
CreateEvent()
+ service. If it is NULL, then execute in
+ blocking mode. BSP waits until this AP
finish
+ or TimeoutInMicroSeconds expires. If
it's
+ not NULL, then execute in non-blocking
mode.
+ BSP requests the function specified by
+ Procedure to be started on this AP,
+ and go on executing immediately. If this
AP
+ return from Procedure or
TimeoutInMicroSeconds
+ expires, this event is signaled. The BSP
+ can use the CheckEvent() or
WaitForEvent()
+ services to check the state of event.
Type
+ EFI_EVENT is defined in CreateEvent() in
+ the Unified Extensible Firmware Interface
+ Specification.
+ @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds
for
+ this AP to finish this Procedure, either
for
+ blocking or non-blocking mode. Zero means
+ infinity. If the timeout expires before
+ this AP returns from Procedure, then
Procedure
+ on the AP is terminated. The
+ AP is available for next function
assigned
+ by
EFI_MP_SERVICES_PROTOCOL.StartupAllAPs()
+ or
EFI_MP_SERVICES_PROTOCOL.StartupThisAP().
+ If the timeout expires in blocking mode,
+ BSP returns EFI_TIMEOUT. If the timeout
+ expires in non-blocking mode, WaitEvent
+ is signaled with SignalEvent().
+ @param[in] ProcedureArgument The parameter passed into Procedure on
the
+ specified AP.
+ @param[out] Finished If NULL, this parameter is ignored. In
+ blocking mode, this parameter is ignored.
+ In non-blocking mode, if AP returns from
+ Procedure before the timeout expires, its
+ content is set to TRUE. Otherwise, the
+ value is set to FALSE. The caller can
+ determine if the AP returned from
Procedure
+ by evaluating this value.
+
+ @retval EFI_SUCCESS In blocking mode, specified AP finished
before
+ the timeout expires.
+ @retval EFI_SUCCESS In non-blocking mode, the function has been
+ dispatched to specified AP.
+ @retval EFI_UNSUPPORTED A non-blocking mode request was made after
the
+ UEFI event EFI_EVENT_GROUP_READY_TO_BOOT was
+ signaled.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_TIMEOUT In blocking mode, the timeout expired before
+ the specified AP has finished.
+ @retval EFI_NOT_READY The specified AP is busy.
+ @retval EFI_NOT_FOUND The processor with the handle specified by
+ ProcessorNumber does not exist.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP or
disabled AP.
+ @retval EFI_INVALID_PARAMETER Procedure is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+StartupThisAP (
+ IN EFI_MP_SERVICES_PROTOCOL *This,
+ IN EFI_AP_PROCEDURE Procedure,
+ IN UINTN ProcessorNumber,
+ IN EFI_EVENT WaitEvent OPTIONAL,
+ IN UINTN TimeoutInMicroseconds,
+ IN VOID *ProcedureArgument OPTIONAL,
+ OUT BOOLEAN *Finished OPTIONAL
+ )
+{
+ return MpInitLibStartupThisAP (
+ Procedure,
+ ProcessorNumber,
+ WaitEvent,
+ TimeoutInMicroseconds,
+ ProcedureArgument,
+ Finished
+ );
+}
+
+/**
+ This service switches the requested AP to be the BSP from that point onward.
+ This service changes the BSP for all purposes. This call can only be
performed
+ by the current BSP.
+
+ This service switches the requested AP to be the BSP from that point onward.
+ This service changes the BSP for all purposes. The new BSP can take over the
+ execution of the old BSP and continue seamlessly from where the old one left
+ off. This service may not be supported after the UEFI Event
EFI_EVENT_GROUP_READY_TO_BOOT
+ is signaled.
+
+ If the BSP cannot be switched prior to the return from this service, then
+ EFI_UNSUPPORTED must be returned.
+
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL
instance.
+ @param[in] ProcessorNumber The handle number of AP that is to become the
new
+ BSP. The range is from 0 to the total number of
+ logical processors minus 1. The total number of
+ logical processors can be retrieved by
+
EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors().
+ @param[in] EnableOldBSP If TRUE, then the old BSP will be listed as an
+ enabled AP. Otherwise, it will be disabled.
+
+ @retval EFI_SUCCESS BSP successfully switched.
+ @retval EFI_UNSUPPORTED Switching the BSP cannot be completed prior
to
+ this service returning.
+ @retval EFI_UNSUPPORTED Switching the BSP is not supported.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_NOT_FOUND The processor with the handle specified by
+ ProcessorNumber does not exist.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the current BSP or
+ a disabled AP.
+ @retval EFI_NOT_READY The specified AP is busy.
+
+**/
+EFI_STATUS
+EFIAPI
+SwitchBSP (
+ IN EFI_MP_SERVICES_PROTOCOL *This,
+ IN UINTN ProcessorNumber,
+ IN BOOLEAN EnableOldBSP
+ )
+{
+ return MpInitLibSwitchBSP (ProcessorNumber, EnableOldBSP);
+}
+
+/**
+ This service lets the caller enable or disable an AP from this point onward.
+ This service may only be called from the BSP.
+
+ This service allows the caller enable or disable an AP from this point
onward.
+ The caller can optionally specify the health status of the AP by Health. If
+ an AP is being disabled, then the state of the disabled AP is implementation
+ dependent. If an AP is enabled, then the implementation must guarantee that a
+ complete initialization sequence is performed on the AP, so the AP is in a
state
+ that is compatible with an MP operating system. This service may not be
supported
+ after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT is signaled.
+
+ If the enable or disable AP operation cannot be completed prior to the return
+ from this service, then EFI_UNSUPPORTED must be returned.
+
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL
instance.
+ @param[in] ProcessorNumber The handle number of AP.
+ The range is from 0 to the total number of
+ logical processors minus 1. The total number of
+ logical processors can be retrieved by
+
EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors().
+ @param[in] EnableAP Specifies the new state for the processor for
+ enabled, FALSE for disabled.
+ @param[in] HealthFlag If not NULL, a pointer to a value that specifies
+ the new health status of the AP. This flag
+ corresponds to StatusFlag defined in
+ EFI_MP_SERVICES_PROTOCOL.GetProcessorInfo().
Only
+ the PROCESSOR_HEALTH_STATUS_BIT is used. All
other
+ bits are ignored. If it is NULL, this parameter
+ is ignored.
+
+ @retval EFI_SUCCESS The specified AP was enabled or disabled
successfully.
+ @retval EFI_UNSUPPORTED Enabling or disabling an AP cannot be
completed
+ prior to this service returning.
+ @retval EFI_UNSUPPORTED Enabling or disabling an AP is not supported.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_NOT_FOUND Processor with the handle specified by
ProcessorNumber
+ does not exist.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP.
+
+**/
+EFI_STATUS
+EFIAPI
+EnableDisableAP (
+ IN EFI_MP_SERVICES_PROTOCOL *This,
+ IN UINTN ProcessorNumber,
+ IN BOOLEAN EnableAP,
+ IN UINT32 *HealthFlag OPTIONAL
+ )
+{
+ return MpInitLibEnableDisableAP (ProcessorNumber, EnableAP, HealthFlag);
+}
+
+/**
+ This return the handle number for the calling processor. This service may be
+ called from the BSP and APs.
+
+ This service returns the processor handle number for the calling processor.
+ The returned value is in the range from 0 to the total number of logical
+ processors minus 1. The total number of logical processors can be retrieved
+ with EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors(). This service may be
+ called from the BSP and APs. If ProcessorNumber is NULL, then
EFI_INVALID_PARAMETER
+ is returned. Otherwise, the current processors handle number is returned in
+ ProcessorNumber, and EFI_SUCCESS is returned.
+
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL
instance.
+ @param[out] ProcessorNumber Pointer to the handle number of AP.
+ The range is from 0 to the total number of
+ logical processors minus 1. The total number of
+ logical processors can be retrieved by
+
EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors().
+
+ @retval EFI_SUCCESS The current processor handle number was
returned
+ in ProcessorNumber.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+WhoAmI (
+ IN EFI_MP_SERVICES_PROTOCOL *This,
+ OUT UINTN *ProcessorNumber
+ )
+{
+ return MpInitLibWhoAmI (ProcessorNumber);
+}
+
+/**
+ Initialize Multi-processor support.
+**/
+VOID
+InitializeMpSupport (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ UINTN NumberOfProcessors;
+ UINTN NumberOfEnabledProcessors;
+
+ //
+ // Wakeup APs to do initialization
+ //
+ Status = MpInitLibInitialize ();
+ ASSERT_EFI_ERROR (Status);
+
+ MpInitLibGetNumberOfProcessors (&NumberOfProcessors,
&NumberOfEnabledProcessors);
+ mNumberOfProcessors = NumberOfProcessors;
+ DEBUG ((DEBUG_INFO, "Detect CPU count: %d\n", mNumberOfProcessors));
+
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &mMpServiceHandle,
+ &gEfiMpServiceProtocolGuid,
+ &mMpServicesTemplate,
+ NULL
+ );
+ ASSERT_EFI_ERROR (Status);
+}
diff --git a/UefiCpuPkg/CpuDxe/LoongArch64/Exception.c
b/UefiCpuPkg/CpuDxe/LoongArch64/Exception.c
new file mode 100644
index 0000000000..96def89936
--- /dev/null
+++ b/UefiCpuPkg/CpuDxe/LoongArch64/Exception.c
@@ -0,0 +1,159 @@
+/** @file Exception.c
+
+ CPU DXE Module initialization exception instance.
+
+ Copyright (c) 2024, Loongson Technology Corporation Limited. All rights
reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#include "CpuDxe.h"
+#include <Guid/VectorHandoffTable.h>
+#include <Library/CpuExceptionHandlerLib.h>
+#include <Register/LoongArch64/Csr.h>
+
+VOID
+ExceptionEntryStart (
+ VOID
+ );
+
+VOID
+ExceptionEntryEnd (
+ VOID
+ );
+
+/**
+ This function registers and enables the handler specified by
InterruptHandler for a processor
+ interrupt or exception type specified by InterruptType. If InterruptHandler
is NULL, then the
+ handler for the processor interrupt or exception type specified by
InterruptType is uninstalled.
+ The installed handler is called once for each processor interrupt or
exception.
+
+ @param InterruptType A pointer to the processor's current interrupt
state. Set to TRUE if interrupts
+ are enabled and FALSE if interrupts are disabled.
+ @param InterruptHandler A pointer to a function of type
EFI_CPU_INTERRUPT_HANDLER that is called
+ when a processor interrupt occurs. If this
parameter is NULL, then the handler
+ will be uninstalled.
+
+ @retval EFI_SUCCESS The handler for the processor interrupt was
successfully installed or uninstalled.
+ @retval EFI_ALREADY_STARTED InterruptHandler is not NULL, and a handler
for InterruptType was
+ previously installed.
+ @retval EFI_INVALID_PARAMETER InterruptHandler is NULL, and a handler for
InterruptType was not
+ previously installed.
+ @retval EFI_UNSUPPORTED The interrupt specified by InterruptType is
not supported.
+
+**/
+EFI_STATUS
+RegisterInterruptHandler (
+ IN EFI_EXCEPTION_TYPE InterruptType,
+ IN EFI_CPU_INTERRUPT_HANDLER InterruptHandler
+ )
+{
+ return (EFI_STATUS)RegisterCpuInterruptHandler (InterruptType,
InterruptHandler);
+}
+
+/**
+ Update the exception start entry code.
+
+ @retval EFI_SUCCESS Update the exception start entry code down.
+ @retval EFI_OUT_OF_RESOURCES The start entry code size out of bounds.
+
+**/
+EFI_STATUS
+EFIAPI
+UpdateExceptionStartEntry (
+ VOID
+ )
+{
+ EFI_PHYSICAL_ADDRESS ExceptionStartEntry;
+ UINTN VectorLength;
+ UINTN MaxLength;
+ UINTN MaxSizeOfVector;
+
+ VectorLength = (UINTN)ExceptionEntryEnd - (UINTN)ExceptionEntryStart;
+
+ //
+ // A vector is up to 512 bytes.
+ //
+ MaxSizeOfVector = 512;
+ MaxLength = (MAX_LOONGARCH_EXCEPTION + MAX_LOONGARCH_INTERRUPT) *
MaxSizeOfVector;
+
+ if (VectorLength > MaxLength) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ ExceptionStartEntry = PcdGet64 (PcdCpuExceptionVectorBaseAddress);
+
+ InvalidateInstructionCacheRange ((VOID *)ExceptionStartEntry, VectorLength);
+ CopyMem ((VOID *)ExceptionStartEntry, (VOID *)ExceptionEntryStart,
VectorLength);
+ InvalidateInstructionCacheRange ((VOID *)ExceptionStartEntry, VectorLength);
+ InvalidateDataCache ();
+
+ //
+ // If PcdCpuExceptionVectorBaseAddress is not used during SEC and PEI
stages, the exception
+ // base addres is set to PcdCpuExceptionVectorBaseAddress.
+ //
+ if (CsrRead (LOONGARCH_CSR_EBASE) != ExceptionStartEntry) {
+ SetExceptionBaseAddress (ExceptionStartEntry);
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Initialize interrupt handling for DXE phase.
+
+ @param Cpu A pointer of EFI_CPU_ARCH_PROTOCOL instance.
+
+ @return VOID.
+
+**/
+VOID
+InitializeExceptions (
+ IN EFI_CPU_ARCH_PROTOCOL *Cpu
+ )
+{
+ EFI_STATUS Status;
+ EFI_VECTOR_HANDOFF_INFO *VectorInfoList;
+ EFI_VECTOR_HANDOFF_INFO *VectorInfo;
+ BOOLEAN IrqEnabled;
+
+ VectorInfo = (EFI_VECTOR_HANDOFF_INFO *)NULL;
+ Status = EfiGetSystemConfigurationTable (&gEfiVectorHandoffTableGuid,
(VOID **)&VectorInfoList);
+
+ if ((Status == EFI_SUCCESS) && (VectorInfoList != NULL)) {
+ VectorInfo = VectorInfoList;
+ }
+
+ //
+ // Disable interrupts
+ //
+ Cpu->GetInterruptState (Cpu, &IrqEnabled);
+ if (IrqEnabled) {
+ Cpu->DisableInterrupt (Cpu);
+ }
+
+ //
+ // Update the Exception Start Entry code to point into CpuDxe.
+ //
+ Status = UpdateExceptionStartEntry ();
+ if (EFI_ERROR (Status)) {
+ DebugPrint (EFI_D_ERROR, "[%a]: Exception start entry code out of
bounds!\n", __func__);
+ ASSERT_EFI_ERROR (Status);
+ }
+
+ //
+ // Intialize the CpuExceptionHandlerLib so we take over the exception vector
table from the DXE Core
+ //
+ Status = InitializeCpuExceptionHandlers (VectorInfo);
+ ASSERT_EFI_ERROR (Status);
+
+ //
+ // Enable interrupts
+ //
+ DebugPrint (EFI_D_INFO, "InitializeExceptions,IrqEnabled = %x\n",
IrqEnabled);
+ if (!IrqEnabled) {
+ Status = Cpu->EnableInterrupt (Cpu);
+ }
+
+ ASSERT_EFI_ERROR (Status);
+}
--
2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#114542): https://edk2.groups.io/g/devel/message/114542
Mute This Topic: https://groups.io/mt/103971655/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
