On Wed, 17 Jan 2024 at 22:36, Jeremy Linton <jeremy.lin...@arm.com> wrote: > > This includes a change to always initialize the PL011 to the > configured baud (which should be 115200 for the SBSA UART), which > fixes linux's assumption that SBSA UARTs are pre-programmed for > 115200. This in turn (re)enables the PL011 when the console is on the > miniuart per the config.txt file. > > Also included is another spin with the DT/XHCI reset patch which puts > removal of the DT node that causes linux to reset the XHCI controller, > as well as an additional patch that updates the DT to match the PCIe > MMIO window we have programmed. This cures much of the problem with > the PCIe/XHCI configuration when booted in DT mode on linux. > > There is also a few menu visibility/section tweaks to assure ACPI/DT > specific settings show up at the appropriate time. > > As well as a minor fix to work around a bogus compiler warning. > > v1->v2: Ard's review comments. > Convert PCIe MMIO address to use the fixedPCDs defined elsewhere > Hardcode 115200 for the SBSA UART > > Jeremy Linton (5): > Platform/RaspberryPi/DualSerialPortLib: Always configure the pl011 > Silicon/Broadcom/BcmGenetDxe: Suppress some bogus compiler warnings > Platform/RaspberryPi: Cleanup menu visibility > Platform/RaspberryPi: Give the user control over the XHCI mailbox > Platform/RaspberryPi: Update PCIe MMIO window for DT >
Pushed patches #2 - #5. Thanks. -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#116636): https://edk2.groups.io/g/devel/message/116636 Mute This Topic: https://groups.io/mt/103796306/21656 Group Owner: devel+ow...@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
