Hi Liming,

Can you help merge the patch? Thanks.

Best,
Aaron

-----Original Message-----
From: gaoliming <gaolim...@byosoft.com.cn> 
Sent: Tuesday, April 2, 2024 9:26 AM
To: devel@edk2.groups.io; Li, Aaron <aaron...@intel.com>
Cc: Bi, Dandan <dandan...@intel.com>; Liu, Yun Y <yun.y....@intel.com>; Yao, 
Jiewen <jiewen....@intel.com>; Ni, Ray <ray...@intel.com>; Kinney, Michael D 
<michael.d.kin...@intel.com>; Liu, Zhiguang <zhiguang....@intel.com>
Subject: 回复: [edk2-devel] [PATCH v2 1/1] MdeModulePkg/AcpiTableDxe: PCD switch 
to avoid using ACPI reclaim memory

Aaron:
  Per the specification, it is valid to publish all ACPI table in
EfiAcpiMemoryNVS. 
  So, I have no other comments for this patch. Reviewed-by: Liming Gao
<gaolim...@byosoft.com.cn>

Thanks
Liming
> -----邮件原件-----
> 发件人: devel@edk2.groups.io <devel@edk2.groups.io> 代表 Aaron Li
> 发送时间: 2024年4月1日 10:32
> 收件人: devel@edk2.groups.io; Liming Gao <gaolim...@byosoft.com.cn>
> 抄送: Bi, Dandan <dandan...@intel.com>; Liu, Yun Y <yun.y....@intel.com>;
> Yao, Jiewen <jiewen....@intel.com>; Ni, Ray <ray...@intel.com>; Kinney,
> Michael D <michael.d.kin...@intel.com>; Liu, Zhiguang
> <zhiguang....@intel.com>
> 主题: Re: [edk2-devel] [PATCH v2 1/1] MdeModulePkg/AcpiTableDxe: PCD
> switch to avoid using ACPI reclaim memory
> 
> Hi Liming,
> 
> Could you please help review and merge it? Thanks.
> 
> Best,
> Aaron
> 
> -----Original Message-----
> From: Liu, Zhiguang <zhiguang....@intel.com>
> Sent: Monday, April 1, 2024 10:06 AM
> To: Li, Aaron <aaron...@intel.com>; devel@edk2.groups.io
> Cc: Bi, Dandan <dandan...@intel.com>; Liming Gao
> <gaolim...@byosoft.com.cn>; Liu, Yun Y <yun.y....@intel.com>; Yao, Jiewen
> <jiewen....@intel.com>; Ni, Ray <ray...@intel.com>; Kinney, Michael D
> <michael.d.kin...@intel.com>
> Subject: RE: [PATCH v2 1/1] MdeModulePkg/AcpiTableDxe: PCD switch to
> avoid using ACPI reclaim memory
> 
> Reviewed-by: Zhiguang Liu <zhiguang....@intel.com>
> 
> > -----Original Message-----
> > From: Li, Aaron <aaron...@intel.com>
> > Sent: Tuesday, March 26, 2024 3:58 PM
> > To: devel@edk2.groups.io
> > Cc: Liu, Zhiguang <zhiguang....@intel.com>; Bi, Dandan
> > <dandan...@intel.com>; Liming Gao <gaolim...@byosoft.com.cn>; Liu, Yun
> Y
> > <yun.y....@intel.com>; Yao, Jiewen <jiewen....@intel.com>; Ni, Ray
> > <ray...@intel.com>; Kinney, Michael D <michael.d.kin...@intel.com>
> > Subject: [PATCH v2 1/1] MdeModulePkg/AcpiTableDxe: PCD switch to avoid
> > using ACPI reclaim memory
> >
> > UEFI spec defined ACPI Tables at boot time can be contained in memory of
> > type EfiACPIReclaimMemory or EfiAcpiMemoryNVS, although
> InstallAcpiTable
> > with AcpiTableProtocol will only allocate memory with type
> > EfiACPIReclaimMemory (Except FACS).
> >
> > This patch provides an optional method controlled by PCD to avoid using
> > EfiACPIReclaimMemory, by setting the PCD PcdNoACPIReclaimMemory to
> > TRUE, all ACPI allocated memory will use EfiAcpiMemoryNVS instead.
> >
> > Cc: Zhiguang Liu <zhiguang....@intel.com>
> > Cc: Dandan Bi <dandan...@intel.com>
> > Cc: Liming Gao <gaolim...@byosoft.com.cn>
> > Cc: Liu Yun <yun.y....@intel.com>
> > Cc: Jiewen Yao <jiewen....@intel.com>
> > Cc: Ray Ni <ray...@intel.com>
> > Cc: Michael D Kinney <michael.d.kin...@intel.com>
> > Signed-off-by: Aaron Li <aaron...@intel.com>
> > ---
> >  MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableProtocol.c | 37
> > +++++++++++++++-----
> >  MdeModulePkg/MdeModulePkg.dec
> |  7 ++++
> >  MdeModulePkg/MdeModulePkg.uni
> |  8 +++++
> >  MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf    |  1
> +
> >  4 files changed, 45 insertions(+), 8 deletions(-)
> >
> > diff --git
> a/MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableProtocol.c
> > b/MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableProtocol.c
> > index e09bc9b704f5..080768033cfa 100644
> > --- a/MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableProtocol.c
> > +++ b/MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableProtocol.c
> > @@ -340,6 +340,7 @@ ReallocateAcpiTableBuffer (
> >    EFI_ACPI_TABLE_INSTANCE  TempPrivateData;
> >    EFI_STATUS               Status;
> >    UINT64                   CurrentData;
> > +  EFI_MEMORY_TYPE          AcpiAllocateMemoryType;
> >
> >    CopyMem (&TempPrivateData, AcpiTableInstance, sizeof
> > (EFI_ACPI_TABLE_INSTANCE));
> >    //
> > @@ -359,6 +360,12 @@ ReallocateAcpiTableBuffer (
> >                   NewMaxTableNumber * sizeof (UINT32);
> >    }
> >
> > +  if (PcdGetBool (PcdNoACPIReclaimMemory)) {
> > +    AcpiAllocateMemoryType = EfiACPIMemoryNVS;  } else {
> > +    AcpiAllocateMemoryType = EfiACPIReclaimMemory;  }
> > +
> >    if (mAcpiTableAllocType != AllocateAnyPages) {
> >      //
> >      // Allocate memory in the lower 32 bit of address range for @@
> -372,13
> > +379,13 @@ ReallocateAcpiTableBuffer (
> >      PageAddress = 0xFFFFFFFF;
> >      Status      = gBS->AllocatePages (
> >                           mAcpiTableAllocType,
> > -                         EfiACPIReclaimMemory,
> > +                         AcpiAllocateMemoryType,
> >                           EFI_SIZE_TO_PAGES (TotalSize),
> >                           &PageAddress
> >                           );
> >    } else {
> >      Status = gBS->AllocatePool (
> > -                    EfiACPIReclaimMemory,
> > +                    AcpiAllocateMemoryType,
> >                      TotalSize,
> >                      (VOID **)&Pointer
> >                      );
> > @@ -512,6 +519,7 @@ AddTableToList (
> >    EFI_PHYSICAL_ADDRESS  AllocPhysAddress;
> >    UINT64                Buffer64;
> >    BOOLEAN               AddToRsdt;
> > +  EFI_MEMORY_TYPE       AcpiAllocateMemoryType;
> >
> >    //
> >    // Check for invalid input parameters @@ -550,6 +558,12 @@
> > AddTableToList (
> >    CurrentTableList->TableSize      = CurrentTableSize;
> >    CurrentTableList->PoolAllocation = FALSE;
> >
> > +  if (PcdGetBool (PcdNoACPIReclaimMemory)) {
> > +    AcpiAllocateMemoryType = EfiACPIMemoryNVS;  } else {
> > +    AcpiAllocateMemoryType = EfiACPIReclaimMemory;  }
> > +
> >    //
> >    // Allocation memory type depends on the type of the table
> >    //
> > @@ -585,7 +599,7 @@ AddTableToList (
> >      // such as AArch64 that allocate multiples of 64 KB
> >      //
> >      Status = gBS->AllocatePool (
> > -                    EfiACPIReclaimMemory,
> > +                    AcpiAllocateMemoryType,
> >                      CurrentTableList->TableSize,
> >                      (VOID **)&CurrentTableList->Table
> >                      );
> > @@ -596,7 +610,7 @@ AddTableToList (
> >      //
> >      Status = gBS->AllocatePages (
> >                      mAcpiTableAllocType,
> > -                    EfiACPIReclaimMemory,
> > +                    AcpiAllocateMemoryType,
> >                      EFI_SIZE_TO_PAGES
> (CurrentTableList->TableSize),
> >                      &AllocPhysAddress
> >                      );
> > @@ -1944,6 +1958,7 @@ AcpiTableAcpiTableConstructor (
> >    UINTN                 RsdpTableSize;
> >    UINT8                 *Pointer;
> >    EFI_PHYSICAL_ADDRESS  PageAddress;
> > +  EFI_MEMORY_TYPE       AcpiAllocateMemoryType;
> >
> >    //
> >    // Check for invalid input parameters @@ -1978,17 +1993,23 @@
> > AcpiTableAcpiTableConstructor (
> >      RsdpTableSize += sizeof
> > (EFI_ACPI_1_0_ROOT_SYSTEM_DESCRIPTION_POINTER);
> >    }
> >
> > +  if (PcdGetBool (PcdNoACPIReclaimMemory)) {
> > +    AcpiAllocateMemoryType = EfiACPIMemoryNVS;  } else {
> > +    AcpiAllocateMemoryType = EfiACPIReclaimMemory;  }
> > +
> >    if (mAcpiTableAllocType != AllocateAnyPages) {
> >      PageAddress = 0xFFFFFFFF;
> >      Status      = gBS->AllocatePages (
> >                           mAcpiTableAllocType,
> > -                         EfiACPIReclaimMemory,
> > +                         AcpiAllocateMemoryType,
> >                           EFI_SIZE_TO_PAGES (RsdpTableSize),
> >                           &PageAddress
> >                           );
> >    } else {
> >      Status = gBS->AllocatePool (
> > -                    EfiACPIReclaimMemory,
> > +                    AcpiAllocateMemoryType,
> >                      RsdpTableSize,
> >                      (VOID **)&Pointer
> >                      );
> > @@ -2037,13 +2058,13 @@ AcpiTableAcpiTableConstructor (
> >      PageAddress = 0xFFFFFFFF;
> >      Status      = gBS->AllocatePages (
> >                           mAcpiTableAllocType,
> > -                         EfiACPIReclaimMemory,
> > +                         AcpiAllocateMemoryType,
> >                           EFI_SIZE_TO_PAGES (TotalSize),
> >                           &PageAddress
> >                           );
> >    } else {
> >      Status = gBS->AllocatePool (
> > -                    EfiACPIReclaimMemory,
> > +                    AcpiAllocateMemoryType,
> >                      TotalSize,
> >                      (VOID **)&Pointer
> >                      );
> > diff --git a/MdeModulePkg/MdeModulePkg.dec
> > b/MdeModulePkg/MdeModulePkg.dec index a82dedc070df..a91058e5b5df
> > 100644
> > --- a/MdeModulePkg/MdeModulePkg.dec
> > +++ b/MdeModulePkg/MdeModulePkg.dec
> > @@ -1533,6 +1533,13 @@ [PcdsFixedAtBuild, PcdsPatchableInModule]
> >    # @Prompt Exposed ACPI table versions.
> >
> >
> gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiExposedTableVersions|0x3E|UIN
> > T32|0x0001004c
> >
> > +  ## Indicates whether ACPI Reclaim memory is not available  # Default
> > + is FALSE that means ACPI Reclaim memory is available  # If it is set
> > + to TRUE that means ACPI Reclaim memory is not available  # For
> example
> > + ACPI Table protocol will use ACPI NVS memory instead of ACPI Reclaim
> > + memory  # @Prompt ACPI Reclaim memory is not available.
> > +
> > +
> >
> gEfiMdeModulePkgTokenSpaceGuid.PcdNoACPIReclaimMemory|FALSE|BOOL
> > EAN|0x
> > + 0001008b
> > +
> >    ## This PCD defines the MAX repair count.
> >    #  The default value is 0 that means infinite.
> >    # @Prompt MAX repair count
> > diff --git a/MdeModulePkg/MdeModulePkg.uni
> > b/MdeModulePkg/MdeModulePkg.uni index
> > a17d34d60b21..6079285e3f8b 100644
> > --- a/MdeModulePkg/MdeModulePkg.uni
> > +++ b/MdeModulePkg/MdeModulePkg.uni
> > @@ -955,6 +955,14 @@
> >
> "BIT 4 -
> > EFI_ACPI_TABLE_VERSION_4_0.<BR>\n"
> >
> "BIT 5 -
> > EFI_ACPI_TABLE_VERSION_5_0.<BR>"
> >
> > +#string
> >
> STR_gEfiMdeModulePkgTokenSpaceGuid_PcdNoACPIReclaimMemory_PROM
> > PT  #language en-US "ACPI Reclaim memory is not available."
> > +
> > +#string
> > STR_gEfiMdeModulePkgTokenSpaceGuid_PcdNoACPIReclaimMemory_HELP
> > #language en-US "Indicates whether ACPI Reclaim memory is not
> available\n"
> > +
> "Default is FALSE that means ACPI
> > Reclaim memory is available\n"
> > +
> "If it is set to TRUE that means
> > ACPI Reclaim memory is not available\n"
> > +
> "For example ACPI Table protocol
> > will use ACPI NVS memory instead of ACPI Reclaim memory"
> > +
> > +
> >  #string
> >
> STR_gEfiMdeModulePkgTokenSpaceGuid_PcdHiiOsRuntimeSupport_PROMPT
> > #language en-US "Enable export HII data and configuration to be used in
OS
> > runtime."
> >
> >  #string
> > STR_gEfiMdeModulePkgTokenSpaceGuid_PcdHiiOsRuntimeSupport_HELP
> > #language en-US "Indicates if HII data and configuration has been
> > exported.<BR><BR>\n"
> > diff --git a/MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
> > b/MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
> > index 86dea43e27e4..be498a56cff0 100644
> > --- a/MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
> > +++ b/MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
> > @@ -68,6 +68,7 @@ [Pcd]
> >    gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId
> ##
> > CONSUMES
> >    gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision
> ##
> > CONSUMES
> >    gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiExposedTableVersions
> ##
> > CONSUMES
> > +  gEfiMdeModulePkgTokenSpaceGuid.PcdNoACPIReclaimMemory
> ##
> > CONSUMES
> >
> >  [Protocols]
> >    gEfiAcpiTableProtocolGuid                     ## PRODUCES
> > --
> > 2.44.0.windows.1
> 
> 
> 
> 
> 





-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#117471): https://edk2.groups.io/g/devel/message/117471
Mute This Topic: https://groups.io/mt/105377029/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-


Reply via email to