Ensure that when a #VC exception happens, the instruction at the
instruction pointer matches the instruction that is expected given the
error code. This is to mitigate the ahoi WeSee attack [1] that could
allow hypervisors to breach integrity and confidentiality of the
firmware by maliciously injecting interrupts. This change is a
translated version of a linux patch e3ef461af35a ("x86/sev: Harden #VC
instruction emulation somewhat")[1] https://ahoi-attacks.github.io/wesee/ Cc: Borislav Petkov (AMD) <b...@alien8.de> Cc: Tom Lendacky <thomas.lenda...@amd.com> Signed-off-by: Adam Dunlap <acdun...@google.com> --- OvmfPkg/Library/CcExitLib/CcExitVcHandler.c | 171 ++++++++++++++++++-- 1 file changed, 160 insertions(+), 11 deletions(-) diff --git a/OvmfPkg/Library/CcExitLib/CcExitVcHandler.c b/OvmfPkg/Library/CcExitLib/CcExitVcHandler.c index 0fc30f7bc4..bd3e9f304a 100644 --- a/OvmfPkg/Library/CcExitLib/CcExitVcHandler.c +++ b/OvmfPkg/Library/CcExitLib/CcExitVcHandler.c @@ -532,8 +532,6 @@ MwaitExit ( IN CC_INSTRUCTION_DATA *InstructionData ) { - CcDecodeModRm (Regs, InstructionData); - Ghcb->SaveArea.Rax = Regs->Rax; CcExitVmgSetOffsetValid (Ghcb, GhcbRax); Ghcb->SaveArea.Rcx = Regs->Rcx; @@ -564,8 +562,6 @@ MonitorExit ( IN CC_INSTRUCTION_DATA *InstructionData ) { - CcDecodeModRm (Regs, InstructionData); - Ghcb->SaveArea.Rax = Regs->Rax; // Identity mapped, so VA = PA CcExitVmgSetOffsetValid (Ghcb, GhcbRax); Ghcb->SaveArea.Rcx = Regs->Rcx; @@ -670,8 +666,6 @@ VmmCallExit ( { UINT64 Status; - CcDecodeModRm (Regs, InstructionData); - Ghcb->SaveArea.Rax = Regs->Rax; CcExitVmgSetOffsetValid (Ghcb, GhcbRax); Ghcb->SaveArea.Cpl = (UINT8)(Regs->Cs & 0x3); @@ -1603,8 +1597,6 @@ Dr7WriteExit ( Ext = &InstructionData->Ext; SevEsData = (SEV_ES_PER_CPU_DATA *)(Ghcb + 1); - CcDecodeModRm (Regs, InstructionData); - // // MOV DRn always treats MOD == 3 no matter how encoded // @@ -1655,8 +1647,6 @@ Dr7ReadExit ( Ext = &InstructionData->Ext; SevEsData = (SEV_ES_PER_CPU_DATA *)(Ghcb + 1); - CcDecodeModRm (Regs, InstructionData); - // // MOV DRn always treats MOD == 3 no matter how encoded // @@ -1671,6 +1661,160 @@ Dr7ReadExit ( return 0; } +/** + Check that the opcode matches the exit code for a #VC. + + Each exit code should only be raised while executing certain instructions. + Verify that rIP points to a correct instruction based on the exit code to + protect against maliciously injected interrupts via the hypervisor. If it does + not, report an unsupported event to the hypervisor. + + Decodes the ModRm byte into InstructionData if necessary. + + @param[in, out] Ghcb Pointer to the Guest-Hypervisor Communication + Block + @param[in, out] Regs x64 processor context + @param[in, out] InstructionData Instruction parsing context + @param[in] ExitCode Exit code given by #VC. + + @retval 0 No problems detected. + @return New exception value to propagate + + +**/ +STATIC +UINT64 +VcCheckOpcodeBytes ( + IN OUT GHCB *Ghcb, + IN OUT EFI_SYSTEM_CONTEXT_X64 *Regs, + IN OUT CC_INSTRUCTION_DATA *InstructionData, + IN UINT64 ExitCode + ) +{ + UINT8 OpCode; + + // + // Expected opcodes are either 1 or 2 bytes. If they are 2 bytes, they always + // start with TWO_BYTE_OPCODE_ESCAPE (0x0f), so skip over that. + // + OpCode = *(InstructionData->OpCodes); + if (OpCode == TWO_BYTE_OPCODE_ESCAPE) { + OpCode = *(InstructionData->OpCodes + 1); + } + + switch (ExitCode) { + case SVM_EXIT_IOIO_PROT: + case SVM_EXIT_NPF: + /* handled separately */ + return 0; + + case SVM_EXIT_CPUID: + if (OpCode == 0xa2) { + return 0; + } + + break; + + case SVM_EXIT_INVD: + break; + + case SVM_EXIT_MONITOR: + CcDecodeModRm (Regs, InstructionData); + + if ((OpCode == 0x01) && (InstructionData->ModRm.Uint8 == 0xc8)) { + return 0; + } + + break; + + case SVM_EXIT_MWAIT: + CcDecodeModRm (Regs, InstructionData); + + if ((OpCode == 0x01) && (InstructionData->ModRm.Uint8 == 0xc9)) { + return 0; + } + + break; + + case SVM_EXIT_MSR: + /* RDMSR */ + if ((OpCode == 0x32) || + /* WRMSR */ + (OpCode == 0x30)) + { + return 0; + } + + break; + + case SVM_EXIT_RDPMC: + if (OpCode == 0x33) { + return 0; + } + + break; + + case SVM_EXIT_RDTSC: + if (OpCode == 0x31) { + return 0; + } + + break; + + case SVM_EXIT_RDTSCP: + CcDecodeModRm (Regs, InstructionData); + + if ((OpCode == 0x01) && (InstructionData->ModRm.Uint8 == 0xf9)) { + return 0; + } + + break; + + case SVM_EXIT_DR7_READ: + CcDecodeModRm (Regs, InstructionData); + + if ((OpCode == 0x21) && + (InstructionData->Ext.ModRm.Reg == 7)) + { + return 0; + } + + break; + + case SVM_EXIT_VMMCALL: + CcDecodeModRm (Regs, InstructionData); + + if ((OpCode == 0x01) && (InstructionData->ModRm.Uint8 == 0xd9)) { + return 0; + } + + break; + + case SVM_EXIT_DR7_WRITE: + CcDecodeModRm (Regs, InstructionData); + + if ((OpCode == 0x23) && + (InstructionData->Ext.ModRm.Reg == 7)) + { + return 0; + } + + break; + + case SVM_EXIT_WBINVD: + if (OpCode == 0x9) { + return 0; + } + + break; + + default: + break; + } + + return UnsupportedExit (Ghcb, Regs, InstructionData); +} + /** Handle a #VC exception. @@ -1773,7 +1917,12 @@ InternalVmgExitHandleVc ( CcInitInstructionData (&InstructionData, Ghcb, Regs); - Status = NaeExit (Ghcb, Regs, &InstructionData); + Status = VcCheckOpcodeBytes (Ghcb, Regs, &InstructionData, ExitCode); + + if (Status == 0) { + Status = NaeExit (Ghcb, Regs, &InstructionData); + } + if (Status == 0) { Regs->Rip += CcInstructionLength (&InstructionData); } else { -- 2.44.0.683.g7961c838ac-goog -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#117926): https://edk2.groups.io/g/devel/message/117926 Mute This Topic: https://groups.io/mt/105581633/21656 Mute #vc:https://edk2.groups.io/g/devel/mutehashtag/vc Group Owner: devel+ow...@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
