You need to ensure that wdp-interface-name in the bearerbox configuration
matches exactly the IP address that you have configured the phone to look
for the gateway at.
Ian
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Raghav V Talasila
Sent: 29 August 2001 11:51
To: '[EMAIL PROTECTED]'
Subject: No response for Siemens from Kannel!
When i try to connect to Kannel with Siemens C35, well it does not get any
response from the gateway.I have tested it with other phones and works
fine.I have checked all the settings on the device and they are fine. can
any one tell me what may be the problem?
Purple Software Limited
Purple House
12 Corporation Street
High Wycombe
Buckinghamshire
HP13 6TQ
Tel: +44 (0) 1494 750300
Fax: +44 (0) 1494 750301
http://www.purplesoftware.com
This e-mail contains proprietary information some or all of which may be
legally privileged. It is intended for the recipient only. If an addressing
error or transmission error has misdirected this e-mail, please notify the
sender immediately or contact [EMAIL PROTECTED] If you are not
the intended recipient you must not use, disclose, distribute, copy, print
or rely on this e-mail. The views expressed in this e mail are those of the
author and do not necessarily reflect the views of Purple Software Limited.
