Andrejus Chaliapinas wrote: > > Could anybody point me on how I could deliver my push message to real phone (sorry, >this > maybe mentioned in docs, but still needs clarification)? In addition to having > bearerbox/wappox&PPG/smsbox and attached to Linux box modem - what I need to set to >route > message from smsbox (which arrives from bearerbox) to that modem to which I plan >connect > my WAP enabled phone?
I'll try to answer this one. It depends if you want a GPRS bearer-based IPv4 push or a GSM bearer-based SMS push to do. This is defined in the PAP document, as you may be aware of. If you use the SMS semantics in the PAP document, which means unsing the MSISDN adressing scheme you will propably be fine. wapbox will take the PPG multi-part request and route it to bearerbox which then sends it via SMS to the phone. Aarno, I not aware if we currently have any smsc-id routing in PPG module?! I don't think so. So messages get routed randomly or to the first available smsc? Stipe [EMAIL PROTECTED] ------------------------------------------------------------------- Wapme Systems AG M�nsterstr. 248 40470 D�sseldorf Tel: +49-211-74845-0 Fax: +49-211-74845-299 E-Mail: [EMAIL PROTECTED] Internet: http://www.wapme-systems.de ------------------------------------------------------------------- wapme.net - wherever you are
