Hi, the list ! I Need some help and have several questions, I've some time to spent on dev for kannel, especially on the SMSC, MMS side.
But to have a quick start, I need some help. 1st, I would like to install a simple, old and basic GSM SMSC based on alligata 1.0 over a RedHat 6.2 or a Mandrake Corporate Server (pratically the same thing). I got the following problem: At_open_data_link: error open(2)ing the character device </dev/ttyS0> System error 13: Permission denied. I remember I've read somewhere that permission have to be changed on this block device to make it works, but even with 777, I still have this msg ? Any ideas ? I've some other problems: With 1.1.6 (thanks for the fresh release) I can't build the doc, I got an error when the makefile attempt to built the alligata.ps I've also a prob with the GSM SMSC part on 1.1.6 At_data_link: fail to set termios attribute System error 5: Input/Output error ??? I got 2 phones: 1 Nokia 7110 with an RS232 cable 1 Ericsson T68 with his RS232 cable Is there anything to do on the cell phone side to make it accept AT cmds ? Is there any place where a described step by step 'how to set a GSM SMSC' is described ? I would like to have a quick proof of concept showing what we could do with kannel and a cell phone to have more bandwith to work on kannel. (My boss just want to buy the 'Empower' SMSC box :(( beuark!!! Closed and proprietary world, just like microsoft) Thanks for your patience, and your help. JJ. Take care all, and keep up the good work. Jean-Jacques LOESCH Chief Architect Volubill >=20 Tel: +33 4 76 04 37 11 Mob: +33 6 18 41 03 80 Fax: +33 4 76 04 37 98 =20 mailto:[EMAIL PROTECTED] http://www.volubill.com
