Hi, I am trying to use Kannel as SMS Gateway. I am using a GSM Phone as SMSC. The model of GSM Phones used are: Ericsson T39m, Ericsson SH888, Ericsson T68, Nokia 9210, Nokia 7650. I connect this phone to the port COM1 on the machine where is installed Kannel software (file device=/dev/ttyS0), but i had problems. I send you 2 files: in "ericsson888.doc" there is the kannel configuration file, and in "kannel2.doc" there are the logs fetched during the tests. Before this tests i used the "FakeSMSC" and everything was ok.
I haven't mounted the device=/dev/ttyS0. I don't know if i need a driver for this kind of modem or if it is supportd automatically by Kannel. I am waiting for your reply, Best Regards, Mino Pica __________________________________________________________________ Tiscali ADSL, l'offerta su misura per te a partire da 24,95 euro al mese! Scopri la tua adsl ideale con il TEST ON LINE http://point.tiscali.it/adsl/{\rtf1\ansi\ansicpg1252\deff0\deflang1040{\fonttbl{\f0\fnil\fcharset0 Courier New;}} \viewkind4\uc1\pard\f0\fs20 2002-10-09 00:01:36 [0] INFO: Added logfile `/tmp/kannel.log' with level `0'.\par 2002-10-09 00:01:36 [0] INFO: ----------------------------------------\par 2002-10-09 00:01:36 [0] INFO: Kannel bearerbox II version 1.2.0 starting\par 2002-10-09 00:01:36 [0] INFO: Started access logfile `access.log'.\par 2002-10-09 00:01:36 [0] DEBUG: HTTP: Opening server at port 13000.\par 2002-10-09 00:01:36 [0] DEBUG: Started thread 1 (gwlib/fdset.c:poller)\par 2002-10-09 00:01:36 [0] DEBUG: Started thread 2 (gwlib/http.c:server_thread)\par 2002-10-09 00:01:36 [0] DEBUG: Started thread 3 (gw/bb_http.c:httpadmin_run)\par 2002-10-09 00:01:36 [0] DEBUG: starting smsbox connection module\par 2002-10-09 00:01:36 [0] DEBUG: Started thread 4 (gw/bb_boxc.c:smsboxc_run)\par 2002-10-09 00:01:36 [0] DEBUG: AT: Command: AT\par 2002-10-09 00:01:36 [0] DEBUG: Read from modem: 'AT OK'\par 2002-10-09 00:01:36 [0] DEBUG: AT: Command: AT&F\par 2002-10-09 00:01:36 [0] DEBUG: Read from modem: 'AT&F OK'\par 2002-10-09 00:01:36 [0] DEBUG: AT: Command: AT\par 2002-10-09 00:01:36 [0] DEBUG: Read from modem: 'AT OK'\par 2002-10-09 00:01:36 [0] DEBUG: AT: Command: ATE0\par 2002-10-09 00:01:36 [0] DEBUG: Read from modem: 'ATE0 OK'\par 2002-10-09 00:01:36 [0] DEBUG: AT: Command: ATI\par 2002-10-09 00:01:36 [0] DEBUG: Read from modem: 'ATI ERROR'\par 2002-10-09 00:01:36 [0] ERROR: Failed to create Smsc wrapper\par 2002-10-09 00:01:36 [0] PANIC: Cannot start with SMSC connection failing\par \par \par \par 2002-10-09 00:08:37 [0] INFO: Added logfile `/tmp/kannel.log' with level `0'.\par 2002-10-09 00:08:37 [0] INFO: ----------------------------------------\par 2002-10-09 00:08:37 [0] INFO: Kannel bearerbox II version 1.2.0 starting\par 2002-10-09 00:08:37 [0] INFO: Started access logfile `access.log'.\par 2002-10-09 00:08:37 [0] DEBUG: HTTP: Opening server at port 13000.\par 2002-10-09 00:08:37 [0] DEBUG: Started thread 1 (gwlib/fdset.c:poller)\par 2002-10-09 00:08:37 [0] DEBUG: Started thread 2 (gwlib/http.c:server_thread)\par 2002-10-09 00:08:37 [0] DEBUG: Started thread 3 (gw/bb_http.c:httpadmin_run)\par 2002-10-09 00:08:37 [0] DEBUG: starting smsbox connection module\par 2002-10-09 00:08:37 [0] DEBUG: Started thread 4 (gw/bb_boxc.c:smsboxc_run)\par 2002-10-09 00:08:37 [0] INFO: AT2[/dev/ttyS0]: configuration doesn't show modemtype. will autodetect\par 2002-10-09 00:08:37 [0] DEBUG: Started thread 5 (gw/smsc_at2.c:at2_device_thread)\par 2002-10-09 00:08:37 [5] DEBUG: AT2[/dev/ttyS0]: detecting modem type\par 2002-10-09 00:08:38 [5] INFO: AT2[/dev/ttyS0]: opening device\par 2002-10-09 00:08:38 [5] DEBUG: AT2[/dev/ttyS0]: device opened\par 2002-10-09 00:08:38 [5] INFO: AT2[/dev/ttyS0]: speed set to 9600\par 2002-10-09 00:08:38 [5] DEBUG: AT2[/dev/ttyS0]: --> ^M\par 2002-10-09 00:08:38 [0] DEBUG: Started thread 6 (gw/bb_smscconn.c:sms_router)\par 2002-10-09 00:08:38 [0] INFO: MAIN: Start-up done, entering mainloop\par 2002-10-09 00:08:38 [0] DEBUG: AT2[/dev/ttyS0]: start called\par 2002-10-09 00:08:38 [6] DEBUG: sms_router: time to sleep\par 2002-10-09 00:08:38 [6] DEBUG: sms_router: list_len = 0\par 2002-10-09 00:08:40 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M\par 2002-10-09 00:08:40 [5] DEBUG: AT2[/dev/ttyS0]: <-- AT\par 2002-10-09 00:08:40 [5] DEBUG: AT2[/dev/ttyS0]: <-- OK\par 2002-10-09 00:08:40 [5] DEBUG: AT2[/dev/ttyS0]: --> AT&F^M\par 2002-10-09 00:08:40 [5] DEBUG: AT2[/dev/ttyS0]: <-- AT&F\par 2002-10-09 00:08:40 [5] DEBUG: AT2[/dev/ttyS0]: <-- OK\par 2002-10-09 00:08:40 [5] DEBUG: AT2[/dev/ttyS0]: --> ATE0^M\par 2002-10-09 00:08:40 [5] DEBUG: AT2[/dev/ttyS0]: <-- ATE0\par 2002-10-09 00:08:40 [5] DEBUG: AT2[/dev/ttyS0]: <-- OK\par 2002-10-09 00:08:40 [5] DEBUG: AT2[/dev/ttyS0]: --> ATI^M\par 2002-10-09 00:08:40 [5] DEBUG: AT2[/dev/ttyS0]: <-- ATI\par 2002-10-09 00:08:40 [5] DEBUG: AT2[/dev/ttyS0]: <-- ERROR\par 2002-10-09 00:08:40 [5] DEBUG: Thread 5 (gw/smsc_at2.c:at2_device_thread) terminates.\par 2002-10-09 00:09:42 [4] DEBUG: Started thread 7 (gw/bb_boxc.c:function)\par 2002-10-09 00:09:42 [7] INFO: Client connected from <127.0.0.1>\par 2002-10-09 00:09:42 [7] DEBUG: Started thread 8 (gw/bb_boxc.c:boxc_sender)\par 2002-10-09 00:14:40 [7] INFO: Connection closed by the box <127.0.0.1>\par 2002-10-09 00:14:40 [0] WARNING: Killing signal received, shutting down...\par 2002-10-09 00:14:40 [0] DEBUG: Shutting down Kannel...\par 2002-10-09 00:14:40 [0] DEBUG: shutting down smsc\par 2002-10-09 00:14:40 [0] DEBUG: AT2[/dev/ttyS0]: Shutting down SMSCConn, slow\par 2002-10-09 00:14:40 [0] DEBUG: shutting down udp\par 2002-10-09 00:14:40 [0] WARNING: SIGHUP received, catching and re-opening logs\par \par \par \par \par 2002-10-09 00:27:18 [0] INFO: Added logfile `/tmp/kannel.log' with level `0'.\par 2002-10-09 00:27:18 [0] INFO: ----------------------------------------\par 2002-10-09 00:27:18 [0] INFO: Kannel bearerbox II version 1.2.0 starting\par 2002-10-09 00:27:18 [0] INFO: Started access logfile `access.log'.\par 2002-10-09 00:27:18 [0] DEBUG: HTTP: Opening server at port 13000.\par 2002-10-09 00:27:18 [0] ERROR: bind failed\par 2002-10-09 00:27:18 [0] ERROR: System error 98: Address already in use\par 2002-10-09 00:27:18 [0] DEBUG: Started thread 1 (gw/bb_http.c:httpadmin_run)\par 2002-10-09 00:27:18 [0] DEBUG: starting smsbox connection module\par 2002-10-09 00:27:18 [0] DEBUG: Started thread 2 (gw/bb_boxc.c:smsboxc_run)\par 2002-10-09 00:27:18 [0] INFO: AT2[/dev/ttyS0]: configuration doesn't show modemtype. will autodetect\par 2002-10-09 00:27:18 [1] DEBUG: HTTP: No clients with requests, quitting.\par 2002-10-09 00:27:18 [0] DEBUG: Started thread 3 (gw/smsc_at2.c:at2_device_thread)\par 2002-10-09 00:27:18 [1] DEBUG: Thread 1 (gw/bb_http.c:httpadmin_run) terminates.\par 2002-10-09 00:27:18 [3] DEBUG: AT2[/dev/ttyS0]: detecting modem type\par 2002-10-09 00:27:18 [3] INFO: AT2[/dev/ttyS0]: opening device\par 2002-10-09 00:27:18 [3] DEBUG: AT2[/dev/ttyS0]: device opened\par 2002-10-09 00:27:18 [3] INFO: AT2[/dev/ttyS0]: speed set to 9600\par 2002-10-09 00:27:18 [3] DEBUG: AT2[/dev/ttyS0]: --> ^M\par 2002-10-09 00:27:18 [0] DEBUG: Started thread 4 (gw/bb_smscconn.c:sms_router)\par 2002-10-09 00:27:18 [0] INFO: MAIN: Start-up done, entering mainloop\par 2002-10-09 00:27:18 [0] DEBUG: AT2[/dev/ttyS0]: start called\par 2002-10-09 00:27:18 [4] DEBUG: sms_router: time to sleep\par 2002-10-09 00:27:18 [4] DEBUG: sms_router: list_len = 0\par 2002-10-09 00:27:18 [2] ERROR: bind failed\par 2002-10-09 00:27:18 [2] ERROR: System error 98: Address already in use\par 2002-10-09 00:27:18 [2] PANIC: Could not open smsbox port 13001\par \par \par \par \par \par 2002-10-09 00:33:34 [0] INFO: Added logfile `/tmp/kannel.log' with level `0'.\par 2002-10-09 00:33:34 [0] INFO: ----------------------------------------\par 2002-10-09 00:33:34 [0] INFO: Kannel bearerbox II version 1.2.0 starting\par 2002-10-09 00:33:34 [0] INFO: Started access logfile `access.log'.\par 2002-10-09 00:33:34 [0] DEBUG: HTTP: Opening server at port 13000.\par 2002-10-09 00:33:34 [0] DEBUG: Started thread 1 (gwlib/fdset.c:poller)\par 2002-10-09 00:33:34 [0] DEBUG: Started thread 2 (gwlib/http.c:server_thread)\par 2002-10-09 00:33:34 [0] DEBUG: Started thread 3 (gw/bb_http.c:httpadmin_run)\par 2002-10-09 00:33:34 [0] DEBUG: starting smsbox connection module\par 2002-10-09 00:33:34 [0] DEBUG: Started thread 4 (gw/bb_boxc.c:smsboxc_run)\par 2002-10-09 00:33:34 [0] INFO: AT2[/dev/ttyS0]: configuration doesn't show modemtype. will autodetect\par 2002-10-09 00:33:34 [0] DEBUG: Started thread 5 (gw/smsc_at2.c:at2_device_thread)\par 2002-10-09 00:33:34 [5] DEBUG: AT2[/dev/ttyS0]: detecting modem type\par 2002-10-09 00:33:34 [5] INFO: AT2[/dev/ttyS0]: opening device\par 2002-10-09 00:33:34 [5] DEBUG: AT2[/dev/ttyS0]: device opened\par 2002-10-09 00:33:34 [5] INFO: AT2[/dev/ttyS0]: speed set to 9600\par 2002-10-09 00:33:34 [5] DEBUG: AT2[/dev/ttyS0]: --> ^M\par 2002-10-09 00:33:34 [0] DEBUG: Started thread 6 (gw/bb_smscconn.c:sms_router)\par 2002-10-09 00:33:34 [0] INFO: MAIN: Start-up done, entering mainloop\par 2002-10-09 00:33:34 [0] DEBUG: AT2[/dev/ttyS0]: start called\par 2002-10-09 00:33:34 [6] DEBUG: sms_router: time to sleep\par 2002-10-09 00:33:34 [6] DEBUG: sms_router: list_len = 0\par 2002-10-09 00:33:36 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M\par 2002-10-09 00:33:40 [5] DEBUG: AT2[/dev/ttyS0]: --> AT&F^M\par 2002-10-09 00:33:44 [5] DEBUG: Thread 5 (gw/smsc_at2.c:at2_device_thread) terminates.\par 2002-10-09 00:34:43 [4] DEBUG: Started thread 7 (gw/bb_boxc.c:function)\par 2002-10-09 00:34:43 [7] INFO: Client connected from <127.0.0.1>\par 2002-10-09 00:34:43 [7] DEBUG: Started thread 8 (gw/bb_boxc.c:boxc_sender)\par 2002-10-09 00:49:02 [0] WARNING: Killing signal received, shutting down...\par 2002-10-09 00:49:02 [0] DEBUG: Shutting down Kannel...\par 2002-10-09 00:49:02 [0] DEBUG: shutting down smsc\par 2002-10-09 00:49:02 [0] DEBUG: AT2[/dev/ttyS0]: Shutting down SMSCConn, slow\par 2002-10-09 00:49:02 [0] DEBUG: shutting down udp\par 2002-10-09 00:49:02 [0] WARNING: SIGHUP received, catching and re-opening logs\par 2002-10-09 00:49:05 [7] INFO: Connection closed by the box <127.0.0.1>\par \par \par \par \par 2002-10-09 00:57:19 [0] INFO: Added logfile `/tmp/kannel.log' with level `0'.\par 2002-10-09 00:57:19 [0] INFO: ----------------------------------------\par 2002-10-09 00:57:19 [0] INFO: Kannel bearerbox II version 1.2.0 starting\par 2002-10-09 00:57:19 [0] INFO: Started access logfile `access.log'.\par 2002-10-09 00:57:19 [0] DEBUG: HTTP: Opening server at port 13000.\par 2002-10-09 00:57:19 [0] DEBUG: Started thread 1 (gwlib/fdset.c:poller)\par 2002-10-09 00:57:19 [0] DEBUG: Started thread 2 (gwlib/http.c:server_thread)\par 2002-10-09 00:57:19 [0] DEBUG: Started thread 3 (gw/bb_http.c:httpadmin_run)\par 2002-10-09 00:57:19 [0] DEBUG: starting smsbox connection module\par 2002-10-09 00:57:19 [0] DEBUG: Started thread 4 (gw/bb_boxc.c:smsboxc_run)\par 2002-10-09 00:57:19 [0] INFO: AT2[/dev/ttyS0]: configuration doesn't show modemtype. will autodetect\par 2002-10-09 00:57:19 [0] DEBUG: Started thread 5 (gw/smsc_at2.c:at2_device_thread)\par 2002-10-09 00:57:19 [5] DEBUG: AT2[/dev/ttyS0]: detecting modem type\par 2002-10-09 00:57:19 [5] INFO: AT2[/dev/ttyS0]: opening device\par 2002-10-09 00:57:19 [5] DEBUG: AT2[/dev/ttyS0]: device opened\par 2002-10-09 00:57:19 [5] INFO: AT2[/dev/ttyS0]: speed set to 9600\par 2002-10-09 00:57:19 [5] DEBUG: AT2[/dev/ttyS0]: --> ^M\par 2002-10-09 00:57:19 [0] DEBUG: Started thread 6 (gw/bb_smscconn.c:sms_router)\par 2002-10-09 00:57:19 [0] INFO: MAIN: Start-up done, entering mainloop\par 2002-10-09 00:57:19 [0] DEBUG: AT2[/dev/ttyS0]: start called\par 2002-10-09 00:57:19 [6] DEBUG: sms_router: time to sleep\par 2002-10-09 00:57:19 [6] DEBUG: sms_router: list_len = 0\par 2002-10-09 00:57:21 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M\par 2002-10-09 00:57:25 [5] DEBUG: AT2[/dev/ttyS0]: --> AT&F^M\par 2002-10-09 00:57:29 [5] DEBUG: Thread 5 (gw/smsc_at2.c:at2_device_thread) terminates.\par 2002-10-09 00:58:12 [4] DEBUG: Started thread 7 (gw/bb_boxc.c:function)\par 2002-10-09 00:58:12 [7] INFO: Client connected from <127.0.0.1>\par 2002-10-09 00:58:12 [7] DEBUG: Started thread 8 (gw/bb_boxc.c:boxc_sender)\par 2002-10-09 01:03:32 [0] INFO: Added logfile `/tmp/kannel.log' with level `0'.\par 2002-10-09 01:03:32 [0] INFO: ----------------------------------------\par 2002-10-09 01:03:32 [0] INFO: Kannel bearerbox II version 1.2.0 starting\par 2002-10-09 01:03:32 [0] INFO: Started access logfile `access.log'.\par 2002-10-09 01:03:32 [0] DEBUG: HTTP: Opening server at port 13000.\par 2002-10-09 01:03:32 [0] DEBUG: Started thread 1 (gwlib/fdset.c:poller)\par 2002-10-09 01:03:32 [0] DEBUG: Started thread 2 (gwlib/http.c:server_thread)\par 2002-10-09 01:03:32 [0] DEBUG: Started thread 3 (gw/bb_http.c:httpadmin_run)\par 2002-10-09 01:03:32 [0] DEBUG: starting smsbox connection module\par 2002-10-09 01:03:32 [0] DEBUG: Started thread 4 (gw/bb_boxc.c:smsboxc_run)\par 2002-10-09 01:03:32 [0] DEBUG: AT: Command: AT\par 2002-10-09 01:03:42 [0] DEBUG: Read from modem: ''\par 2002-10-09 01:03:42 [0] DEBUG: AT: Command: AT&F\par 2002-10-09 01:03:52 [0] DEBUG: Read from modem: ''\par 2002-10-09 01:03:52 [0] DEBUG: AT: Command: AT\par 2002-10-09 01:04:02 [0] DEBUG: Read from modem: ''\par 2002-10-09 01:04:02 [0] DEBUG: AT: Command: ATE0\par 2002-10-09 01:04:12 [0] DEBUG: Read from modem: ''\par 2002-10-09 01:04:12 [0] ERROR: Failed to create Smsc wrapper\par 2002-10-09 01:04:12 [0] PANIC: Cannot start with SMSC connection failing\par \par \par }
ericsson888.doc
Description: Binary data
