On Freitag, August 15, 2003, at 01:58 Uhr, Bill Brigden wrote:
Hi,
Im running cvs-20030811, and we have 9 connections to our providers:
1 transmitter/receiver to provider 1
3 transmitters to provider 2
1 receiver to provider 2
1 transceiver to provider 3
2 transmitters to provider 4
1 receiver to provider 4
now each provider has the same smsc-id, so it will load balance within each
set of provider connections.... However, if I do a smsc-stop via the http
admin, it will only stop the first smsc-id that matches, and the other smsc
connections with the same smsc-id stay connected. Is this behaviour
expected?
yes
you should give every smsc different ID's. You most probably will have troubles with delivery reports this way anyway.
then on every smsc config you define
allowed-smsc: mysmscname, genericsmscname
this means when you send with smsc=mysmscname it will go to that specific link while when you send with smsc=genericsmscname it will go to any link.
if you omit it, it wont go anywhere.
Andreas Fink
Global Networks Switzerland AG
------------------------------------------------------------------
Tel: +41-61-6666333 Fax: +41-61-6666334 Mobile: +41-79-2457333
Global Networks, Inc. Clarastrasse 3, 4058 Basel, Switzerland
Web: http://www.global-networks.ch/� [EMAIL PROTECTED]
------------------------------------------------------------------
