you need to enable use of DLR; one of the DLR bits is SMSC buffered; this means that your submit_sm succeeded; if it failed bit 0x010 indicates not delivered to SMSC - the submit_sm failed; Yes I have issue with it always returning "Sent" for other reasons; cheers
----- Original Message ----- From: "Roberto Carlos Navas" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, July 31, 2004 10:28 AM Subject: HTTP sendsms interface always return "Sent." ??? -#- MailID:QAAA Just wondering why if giving a well setup Kannel SMS gateway, using an SMSC over SMPP, I always receive the "Sent." HTTP response when sending over the sendsms interface, even when the SUBMIT_SM fails (on the SMPP side of the connection)??? Am I missing something?? I have enabled the store-file parameter on the bearerbox, so kannel always retries messages on the store when the SMSC responds with a negative ACK (submit_sm_resp status != 0). No matter if I enable or disable the store-file, It always responds with "Sent.", but watching the bearerbox logs, the message fails to reach the SMSC, since it receives an SMPP error code. Is it that the "Sent." only means it was sent from smsbox to the bearerbox succesfully?? Thanks in advance for any reply, ______________________________________________ Roberto Carlos Navas SubGerente T�cnico de Internet Telemovil El Salvador Centro Financiero Gigante, Torre "D", Piso 9 San Salvador, El Salvador Mobile: +503 8832010 NOC: +503 2080008 Fax: +503 2809450
