Hi, I'm setting up Kannel so that it would send pager alerts via UCP through an attached modem. Here's the configuration:
group = smsc smsc = emi_x25 smsc-id = TVT_PAGER throughput = 1 phone = 007XXXXXXX device = term/b allowed-prefix = 500 preferred-prefix = 500 smsc-username = foo smsc-password = bar keepalive = 0 Before sending anything, just started the gateway, and it started dialing that number, then it keeps hanging up and re-dialling again immediately. With log level set to 0, it prints only the dialing status: 2006-02-20 13:58:28 [27163] [6] INFO: at_dial: dialing <00XXXXXXXXX> on </dev/term/b> for <30> seconds 2006-02-20 13:58:48 [27163] [6] DEBUG: at_dial: CONNECT 2006-02-20 13:58:49 [27163] [6] DEBUG: at_dial: done with dialing 2006-02-20 13:59:33 [27163] [6] INFO: at_dial: dialing <00XXXXXXXXX> on </dev/term/b> for <30> seconds 2006-02-20 13:59:52 [27163] [6] DEBUG: at_dial: CONNECT 2006-02-20 13:59:53 [27163] [6] DEBUG: at_dial: done with dialing and so on infinitely. what's missing in the config? I'm using the snapshot from 20060216. thanks, stan
