you basically define two smsc's with the same SMSC-id and you should
be done
On 08.05.2007, at 19:22, Hillel wrote:
Hi,
We have a SMSC provider that wants us to load balance so the
diagram will
look like:
Sending SMSs:
Kannel ---Bind to Gateway1-----> Gateway1 ----connect to SMSC-----
> SMSC
---Bind to Gateway2-----> Gateway2 ----connect to SMSC----->
For Incoming SMSs and delivery receipts:
Kannel <---Bind to Kannel----- Gateway1 <----connect to
Gateway1----- SMSC
<---Bind to Kannel----- Gateway2 <----connect to Gateway2
-----
From Gateway 1 and Gateway 2 we can send SMSs at 10 SMSs/sec per
Gateway.
For SMSs going out, we must send via both Gateway1 and Gateway2 to
get 20
SMSs/sec.
If either of the gateways go down the other must get the full
amount of the
SMSs and throttle at 10 SMS/sec.
For delivery receipts they can come back via either Gateway.
For Incoming SMSs they can come back via either Gateway.
1. For Sending SMSs is there any way to get Kannel to do the load
balancing
or must one add a patch to CVS?
For incoming SMSs we would like to use the setup:
group = smsbox-route
smsbox-id = smsc_provider
smsc-id = "Gateway1;Gateway2"
2. Will this work for delivery receipts so that they can come back
with
either Gateway1 or Gateway2.? (I assume this will work for incoming
SMSs as
this is described
via the Kannel CVS website.)
Thanks, any ideas on how to setup load-balancing (or if it can be
done)
appreciated
Andreas Fink
Fink Consulting GmbH
Global Networks Schweiz AG
BebbiCell AG
---------------------------------------------------------------
Tel: +41-61-6666330 Fax: +41-61-6666331 Mobile: +41-79-2457333
Address: Clarastrasse 3, 4058 Basel, Switzerland
E-Mail: [EMAIL PROTECTED]
www.finkconsulting.com www.global-networks.ch www.bebbicell.ch
---------------------------------------------------------------
ICQ: 8239353 MSN: [EMAIL PROTECTED] AIM: smsrelay Skype: andreasfink
Yahoo: finkconsulting SMS: +41792457333
