Hi Tony
Where you able to make your modem work with Andreas patch?
Regards
Alvaro
On Mon, Jun 23, 2008 at 9:15 PM, Andreas Fink <[EMAIL PROTECTED]> wrote:
> Tony,
>
> Try CVS version and apply this patch.
>
>
>
> This adds telnet support besides rawtcp.
> I also added support for login/password prompts scanning as the Multi-Tech
> asks for Username / Password at login (and Cisco's do as well usually).
>
>
> in the config put this:
>
>
> group = modems
> id = *wavecom*
> name = Wavecom
> detect-string = "WAVECOM"
>
> group = smsc
> smsc = at
> smsc-id = "mymodem"
> modemtype = *wavecom*
> speed = 19200
> device = *telnet*
> port = *5000*
> host = *1.2.3.4*
> keepalive = 240
> smsc-username = *xxxx*
> smsc-password = *xxxx*
>
>
> I tested with Multitech Firmware Release 1.19.
> If it works fine with you and others, I will commit it tomorrow after
> having it tested with a cisco router as well.
>
>
> On 24.06.2008, at 01:02, Andreas Fink wrote:
>
> Tony,
> I looked a little bit deeper into your issue with Multi-Tech MTCBA-G-EN-F4
> modem.
> I actually have such a device now on my desk as I found it rather neat to
> have it on ethernet. Saves a computer and USB to serial for my test modem
> banks.
>
> There are two things to be changed for it to work with Kannel:
>
> a) after connecting a tcp session, a telnet handshake has to be done (that
> part i find rather strange). So some exchange of escape sequences has to be
> done.
> b) after that exchange, the user is prompted with Login: and Password:
> before he gets access to the AT commands.
>
> tcp connections are supported in kannel (device=rawtcp, host=... port=...)
> but above stops your device from working.
> I'll see that I can make a patch for this device by extending kannel to
> support smsc-username/smsc-password on at-commands to log in as well as to
> add the telnet handshake.
>
> On 19.06.2008, at 00:08, Tony Kirkham wrote:
>
> I have not been able to make any headway on this. If anyone has any ideas,
> that would help, I would greatly appreciate it.
>
> Thanks,
>
> -Tony
>
> On Sat, Jun 7, 2008 at 1:27 PM, Tony Kirkham <[EMAIL PROTECTED]>
> wrote:
>
>> Hi, guys,
>>
>> I'm back with more questions. I am still trying to get kannel to talk to
>> a Multi-Tech MTCBA-G-EN-F4 modem that connects via an ethernet port.
>>
>> If you have good knowledge of the smsc_at driver code I could really use
>> your help.
>>
>> I have been hacking away at the smsc_at.c code and have wrapped the code
>> to detect the modem speed in an
>> if ( privdata->is_serial ) { ... }
>> statement so that this won't be attempted because, apparently, you cannot
>> detect this modems speed.
>>
>> I thought this would solve my problem but, alas, it did not. I have now
>> worked my way down into the at2_read_buffer() call and I think that this is
>> where the problem is occurring. I have placed a few DEBUG log file writes
>> in locations to show what is happening. I am completely new to
>> communicating to modems and via raw tcp so I do not know what should be
>> expected. However, I don't think the at2_read_buffer() call is getting
>> anything. Below, is a reduced log file for the at device containing what is
>> written from a startup - shutdown cycle of bearerbox.
>>
>> The biggest indicators that I see are that privdata->lib = strange
>> characters and at2_read_line() never finds an end-of-line character. The
>> at2_read_buffer() call only executes a read the first time for the first AT
>> command. After that it seems like the state of something is stuck because
>> the select() call only returns 0 causing the at2_read_buffer() call to
>> return NULL before the read() is attempted.
>>
>> If anyone has some insight into this I would greatly appreciate it. I am
>> using the code in the source download. I have not pulled anything from the
>> cvs repository.
>>
>> Thank you very much,
>>
>> -Tony
>>
>> log file
>>
>> 1 2008-06-07 12:51:06 [15527] [6] INFO: AT2[vzn00]: opening device
>> 2 2008-06-07 12:51:06 [15527] [6] DEBUG: AT2[vzn00]: device opened
>> 3 2008-06-07 12:51:06 [15527] [6] INFO: AT2[vzn00]: init device
>> 4 2008-06-07 12:51:06 [15527] [6] DEBUG: AT2[vzn00]: --> ATZ^M
>> 5 2008-06-07 12:51:06 [15527] [6] DEBUG: AT2[vzn00]: --> ATZ^M
>> -response: 4
>> 6 2008-06-07 12:51:06 [15527] [6] DEBUG: in at2_wait_modem_command:
>> before while cur_time <= end_time
>> 7 2008-06-07 12:51:06 [15527] [6] DEBUG: in at2_read_buffer: after
>> select, ret: 1
>> 8 2008-06-07 12:51:06 [15527] [6] DEBUG: in at2_read_buffer: before
>> read, ret: 1
>> 9 2008-06-07 12:51:06 [15527] [6] DEBUG: in at2_read_buffer: after
>> read, s: 12
>> 10 2008-06-07 12:51:06 [15527] [6] DEBUG: in at2_read_line with
>> gt_flag=0, gtloc=-1, lib=ÿý^Xÿý ÿý#ÿý'
>> 11 2008-06-07 12:51:06 [15527] [6] DEBUG: in at2_read_line if eol ==
>> -1 will return NULL eol: -1
>> 12 2008-06-07 12:51:06 [15527] [6] DEBUG: in at2_read_buffer: after
>> select, ret: 0
>> 13 2008-06-07 12:51:10 [15527] [6] DEBUG: in at2_read_line with
>> gt_flag=0, gtloc=-1, lib=ÿý^Xÿý ÿý#ÿý'
>> 14 2008-06-07 12:51:10 [15527] [6] DEBUG: in at2_read_line if eol ==
>> -1 will return NULL eol: -1
>> ... 1000's of repetitions of the above 3 lines ...
>> 15 2008-06-07 12:51:10 [15527] [6] DEBUG: in at2_wait_modem_command:
>> Out of loop: cur_time: 1212864670, end_time: 1212864669
>> 16 2008-06-07 12:51:10 [15527] [6] ERROR: AT2[vzn00]: Wrong or no
>> answer to ATZ, ignoring
>> 17 2008-06-07 12:51:10 [15527] [6] DEBUG: AT2[vzn00]: --> AT^M
>> 18 2008-06-07 12:51:10 [15527] [6] DEBUG: AT2[vzn00]: --> AT^M
>> -response: 3
>> 19 2008-06-07 12:51:10 [15527] [6] DEBUG: in at2_wait_modem_command:
>> before while cur_time <= end_time
>> 20 2008-06-07 12:51:10 [15527] [6] DEBUG: in at2_read_buffer: after
>> select, ret: 0
>> 21 2008-06-07 12:51:10 [15527] [6] DEBUG: in at2_read_line with
>> gt_flag=0, gtloc=-1, lib=ÿý^Xÿý ÿý#ÿý'
>> 22 2008-06-07 12:51:10 [15527] [6] DEBUG: in at2_read_line if eol ==
>> -1 will return NULL eol: -1
>> ... 1000's of repetitions ...
>> 23 2008-06-07 12:51:10 [15527] [6] DEBUG: in at2_read_buffer: after
>> select, ret: 0
>> 24 2008-06-07 12:51:14 [15527] [6] DEBUG: in at2_read_line with
>> gt_flag=0, gtloc=-1, lib=ÿý^Xÿý ÿý#ÿý'
>> 25 2008-06-07 12:51:14 [15527] [6] DEBUG: in at2_read_line if eol ==
>> -1 will return NULL eol: -1
>> 26 2008-06-07 12:51:14 [15527] [6] DEBUG: in at2_wait_modem_command:
>> Out of loop: cur_time: 1212864674, end_time: 1212864673
>> 27 2008-06-07 12:51:14 [15527] [6] ERROR: AT2[vzn00]: Wrong or no
>> answer to AT. Trying again
>> 28 2008-06-07 12:51:14 [15527] [6] DEBUG: AT2[vzn00]: --> AT^M
>> 29 2008-06-07 12:51:14 [15527] [6] DEBUG: AT2[vzn00]: --> AT^M
>> -response: 3
>> 30 2008-06-07 12:51:14 [15527] [6] DEBUG: in at2_wait_modem_command:
>> before while cur_time <= end_time
>> 31 2008-06-07 12:51:14 [15527] [6] DEBUG: in at2_read_buffer: after
>> select, ret: 0
>> 32 2008-06-07 12:51:14 [15527] [6] DEBUG: in at2_read_line with
>> gt_flag=0, gtloc=-1, lib=ÿý^Xÿý ÿý#ÿý'
>> 33 2008-06-07 12:51:14 [15527] [6] DEBUG: in at2_read_line if eol ==
>> -1 will return NULL eol: -1
>> ... 1000's of repetitions ...
>> 34 2008-06-07 12:51:14 [15527] [6] DEBUG: in at2_read_buffer: after
>> select, ret: 0
>> 35 2008-06-07 12:51:18 [15527] [6] DEBUG: in at2_read_line with
>> gt_flag=0, gtloc=-1, lib=ÿý^Xÿý ÿý#ÿý'
>> 36 2008-06-07 12:51:18 [15527] [6] DEBUG: in at2_read_line if eol ==
>> -1 will return NULL eol: -1
>> 37 2008-06-07 12:51:18 [15527] [6] DEBUG: in at2_wait_modem_command:
>> Out of loop: cur_time: 1212864678, end_time: 1212864677
>> 38 2008-06-07 12:51:18 [15527] [6] ERROR: AT2[vzn00]: Second attempt
>> to send AT failed
>> 39 2008-06-07 12:51:18 [15527] [6] ERROR: AT2[vzn00]: Opening failed.
>> Terminating
>> 40 2008-06-07 12:51:18 [15527] [6] INFO: AT2[vzn00]: closing device
>> 41 2008-06-07 12:51:18 [15527] [6] INFO: AT2[vzn00]: closing device
>> 42 2008-06-07 12:51:18 [15527] [6] DEBUG: Thread 6
>> (gw/smsc/smsc_at.c:at2_device_thread) terminates.
>>
>>
>>
>
>
>
>
--
|-----------------------------------------------------------------------------------------------------------------|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y
Nextel en México y en mas de 180 paises. Use aplicaciones 2 vias via SMS y
GPRS online
Visitenos en www.smsglobal.com.mx y www.pravcom.com
