1. The bb is not an issue. I send one (long) message to bb and I get one dlr back. 2. What if the message consists of 3 or more message? I generate a DLR for the last message? Bearerbox, on the other hand can only find the first message in the dlr table. The other ones are not found.
I agree with sending two (or more) DLR's: one for each message. But smsc_smpp doesn't seem to be able to find the other ones. == Rene -----Original Message----- From: Nikos Balkanas [mailto:[email protected]] Sent: donderdag 17 juni 2010 18:19 To: Rene Kluwen Subject: Re: FW: Issue with concatenated messages and load balancing over SMPP The solution is simple: 1) As far as bb is concerned, ACK each Msg that is sending you, otherwise it will keepon sending it to you. 2) If what you say is correct, and you need to emulate an SMSc to the ESME, you need to generate the DLR for the second part. But the question is: What if only the first part succeeds and the second fails (network issue, etc.) The final DLR for this should be FAILED. However, if BB keeps track of only the first part, it will be SUCCESS. In the HLR that I implemented, I remember passing 2 DLRs from bb to the commercial SMPPbox by Stipe. BR, Nikos ----- Original Message ----- From: "Rene Kluwen" <[email protected]> To: "'Nikos Balkanas'" <[email protected]> Sent: Thursday, June 17, 2010 4:38 PM Subject: RE: FW: Issue with concatenated messages and load balancing over SMPP I also thought each part needs a separate dlr. But Kannel seems to think differently. == Rene
