Hello Andreas, thks for help-me,
I found one thing,
when the parameter of pap "progress-notes-requested" at the beginning of
this wapbox the tag is killed when he is at the end of the tag or not there
is wapbox is alive and sends the wappush.
huawei as MMSC sends the "progress-notes-requested" at the beginning of the
tag I removed a sentence "IF" File "wap_push_pap_compiler.c"
1293 if (octstr_compare (element_name, octstr_imm ("push-message")) == 0)
{
1294 if (octstr_compare (attr_name, Octstr_imm 1295 ("progress-notes-
requested")) == 0)
1296 (** e). U.Push_Message.progress_notes_requested =
1297 (ret = parse_requirement (attr_value))> = 0? ret 0;
and then the wapbox not die again
but even so, the phone does not understand the message and will not get MMS.
do not know if there's something about this but in the MMSE is malformed
packet wireshark seconds:
Wireless Session Protocol, Method: Push (0x06), Content-Type:
application/vnd.wap.mms-message
Transaction ID: 0x14
PDU Type: Push (0x06)
Headers Length: 73
Content-Type: application/vnd.wap.mms-message
Headers
X-Wap-Application-Id: x-wap-application:mms.ua
Content-Transfer-Encoding: binary
Content-Length: 330
Encoding-Version: 1.3
MMS Message Encapsulation, Type: Unknown type 45
X-Mms-Message-Type: Unknown (0x2d)
[Malformed Packet: MMSE]
[Expert Info (Error/Malformed): Malformed Packet (Exception occurred)]
[Message: Malformed Packet (Exception occurred)]
[Severity level: Error]
[Group: Malformed]
sorry for my terrible inglish.
best regards,
Rafael Aquino
2012/7/26 Andreas Fink <[email protected]>
> try running it in the debugger and produce a backtrace if possible. If the
> wapbox is killed its most likely a bug.
> Furthermore, there is no PANIC text in the trace below. Check the logfiles
> for more info (run with log-level=0)
> It should probably say where it crashes.
>
> On 25.07.2012, at 20:14, Rafael Aquino wrote:
>
> hello All,
>
> i have a problem using the kannel PPG with huawei MMSC sending mmsc wap
> push, can you hellp me?
>
> 2012-07-25 14:53:01 [25836] [12] DEBUG: HTTP: Creating HTTPClient for
> `172.XX.X.XX'.
> 2012-07-25 14:53:01 [25836] [12] DEBUG: HTTP: Created HTTPClient area
> 0xa5eb3d0.
> 2012-07-25 14:53:01 [25836] [15] INFO: PPG: Accept request </ppg> from
> <172.XX.X.XX>
> 2012-07-25 14:53:01 [25836] [15] DEBUG: PPG: http_read_thread: pap
> multipart accepted
> 2012-07-25 14:53:01 [25836] [15] PANIC: /usr/bin/wapbox [0x475d3f]
> 2012-07-25 14:53:01 [25836] [15] PANIC: /lib64/libpthread.so.0
> [0x3ba780ebe0]
> 2012-07-25 14:53:01 [25836] [15] PANIC: /usr/bin/wapbox [0x425360]
> 2012-07-25 14:53:01 [25836] [15] PANIC: /usr/bin/wapbox [0x424ff2]
> 2012-07-25 14:53:01 [25836] [15] PANIC: /usr/bin/wapbox [0x424fd1]
> 2012-07-25 14:53:01 [25836] [15] PANIC: /usr/bin/wapbox(pap_compile+0x88)
> [0x425678]
> 2012-07-25 14:53:01 [25836] [15] PANIC: /usr/bin/wapbox [0x41bdf0]
> 2012-07-25 14:53:01 [25836] [15] PANIC: /usr/bin/wapbox [0x461235]
> 2012-07-25 14:53:01 [25836] [15] PANIC: /lib64/libpthread.so.0
> [0x3ba780677d]
> 2012-07-25 14:53:01 [25836] [15] PANIC: /lib64/libc.so.6(clone+0x6d)
> [0x3ba70d49ad]
>
> the wapbox is killed by PPG request from MMSC
>
>
> <?xml
> version="1.0"
> ?>
> <!DOCTYPE pap PUBLIC "-//WAPFORUM//DTD PAP 1.0//EN" "
> http://www.wapforum.org/DTD/pap_1.0.dtd";>
> <pap>
> <push-message
> progress-notes-requested="false"
> ppg-notify-requested-to="http://172.XX.X.XXX/was";
> push-id="000120000015559120725145436001">
> <address
> address-value="
> WAPPUSH=+5534XXXXXXXX/[email protected]">
> </address>
> <quality-of-service
> bearer-required="true"
> bearer="SMS"
> network-required="true"
> network="GSM"
> delivery-method="unconfirmed"
> priority="medium">
> </quality-of-service>
> </push-message>
> </pap>
>
>
>
>
> my last config:
>
>
> group = core
> admin-port = 13000
> wapbox-port = 13002
> smsbox-port = 13003
> admin-password = XXXX
> status-password = YYYY
> wdp-interface-name = "*"
> log-file = "/var/log/kannel/bearerbox.log"
> log-level = 0
> box-deny-ip = "*.*.*.*"
> box-allow-ip = "127.0.0.1"
> access-log = "/var/log/kannel/access.log"
> store-type = file
> store-location = "/var/log/kannel/sms-store.dta"
>
>
> group = wapbox
> bearerbox-host = 127.0.0.1
> log-file = "/var/log/kannel/wapbox.log"
> log-level = 0
> syslog-level = none
> access-log = "/var/log/kannel/wapaccess.log"
>
>
> group = radius-acct
> our-port = 1813
> secret-nas = 1212
> remote-host = 127.0.0.1
> remote-port = 1646
> secret-radius = 1212
>
> group = smsbox
> bearerbox-host = 127.0.0.1
> sendsms-port = 13013
> log-file = "/var/log/kannel/smsbox.log"
> log-level = 0
> access-log = "/var/log/kannel/smsaccess.log"
> sendsms-url = /cgi-bin/sendsms
> mo-recode = true
>
> group = ppg
> ppg-url = /ppg
> ppg-port = 9080
> concurrent-pushes = 100
> default-smsc = fo
> users=1024
> global-sender ="+5534XXXXXX"
> service-name = PPG0
> trusted-pi = true
> ppg-allow-ip = "*.*.*.*"
>
> group = smsc
> smsc = smpp
> smsc-id = fo
> no-sender = true
> no-coding = true
> transceiver-mode = yes
> smsc-username = XXXX
> smsc-password = XXXXXX
> system-type = "WAP"
> service-type = "WAP"
> host = 172.29.7.10
> port = 5019
> dest-addr-ton = 1
> dest-addr-npi = 1
> bind-addr-ton = 1
> bind-addr-npi = 1
> #msg-id-type = "0x00"
> receive-port = ""
> my-number = "+5534XXXXXX"
>
>
>
> please help me...
>
>
> Rafael Aquino
>
>
>
