If I comment out the lines between:
#if defined(CRTSCTS) and #endif, then it works. Weird. == Rene From: [email protected] [mailto:[email protected]] On Behalf Of Rene Kluwen Sent: Monday, 06 August, 2012 18:21 To: 'Andreas Fink'; [email protected] Subject: RE: at smsc bug These are the changes that were made since the version that worked (see attached document). I tried both hardware-flow-control = true and false. Both gave me the same error. == Rene From: Andreas Fink [mailto:[email protected]] Sent: Monday, 06 August, 2012 18:07 To: Rene Kluwen Subject: Re: at smsc bug please run it in with log-level=0 and send the output of the logfile so we can see the backtrace of the issue. On 06.08.2012, at 18:01, Rene Kluwen <[email protected]> wrote: When starting current head revision in combination with a huwaei usb modem, I get the following. An older version of bearerbox has been working perfectly for some months already. This happened when I tried to upgrade. This is on a production machine, so it is a little bit hard to debug. The only thing that left me was downgrading again. Logs: 2012-08-06 17:55:07 [6608] [0] INFO: ---------------------------------------- 2012-08-06 17:55:07 [6608] [0] INFO: Kannel bearerbox II version svn-r4988 starting 2012-08-06 17:55:07 [6608] [0] INFO: MAIN: Start-up done, entering mainloop 2012-08-06 17:55:07 [6608] [0] DEBUG: AT2[hvgsmsc]: start called 2012-08-06 17:55:07 [6608] [6] DEBUG: Thread 6 (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 6608. 2012-08-06 17:55:07 [6608] [6] DEBUG: AT2[hvgsmsc]: detecting modem speed. 2012-08-06 17:55:07 [6608] [6] INFO: AT2[hvgsmsc]: opening device 2012-08-06 17:55:07 [6608] [6] DEBUG: AT2[hvgsmsc]: device opened. Telnet mode = 0 2012-08-06 17:55:07 [6608] [6] PANIC: ./bearerbox [0x80e8ebd] 2012-08-06 17:55:07 [6608] [6] PANIC: [0x160440] 2012-08-06 17:55:07 [6608] [6] PANIC: ./bearerbox [0x808764d] 2012-08-06 17:55:07 [6608] [6] PANIC: ./bearerbox [0x80877ca] 2012-08-06 17:55:07 [6608] [6] PANIC: ./bearerbox [0x80d3541] 2012-08-06 17:55:07 [6608] [6] PANIC: /lib/libpthread.so.0 [0x9bc45b] 2012-08-06 17:55:07 [6608] [6] PANIC: /lib/libc.so.6(clone+0x5e) [0x91423e] Segmentation fault Config: group = smsc smsc-id = hvgsmsc smsc = at modemtype=auto device=/dev/ttyUSB0 my-number=+316xxxxxxx pin = 0000 connect-allow-ip = 127.0.0.1 sms-center = "+316540881000" log-level = 0 sim-buffering = true group = modems id = huawei name = "Huawei" detect-string = "huawei" detect-string2 = "K3765" init-string = "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0; +CNMI=1,1,0,2,0; +CMEE=1" message-storage = "SM" message-start = 0
