Symptoms: LinuxBIOS boots up, appears to stall sometime after loading USB
modules. No output on monitor. Disconnecting and reconnecting USB disk drive
has the kernel printing messages, so it's not frozen or hard-locked.
Tested on a PLCC ROM chip, on two boards both still using the Insyde BIOS
Serial output log attached.
ø
LinuxBIOS-1.1.8.0Fallback Thu Aug 24 19:17:19 EDT 2006 starting...
LinuxBIOS-1.1.8.0Fallback Thu Aug 24 19:17:19 EDT 2006 starting...
done cpuRegInit
Ram1.00
Ram2.00
computed msr.hi 10075012
Ram3
Ram4
Copying LinuxBIOS to ram.
Jumping to LinuxBIOS.
LinuxBIOS-1.1.8.0Fallback Thu Aug 24 19:17:19 EDT 2006 booting...
end 6080bcac, start 0
32-bit delta 797
calibrate_tsc 32-bit result is 797
clocks_per_usec: 797
Enumerating buses...
scan_static_bus for Root Device
gx2 north: enable_dev
DEVICE_PATH_APIC_CLUSTER
gx2 north: end enable_dev
APIC_CLUSTER: 0 enabled
gx2 north: enable_dev
DEVICE_PATH_PCI_DOMAIN
Enter northbridgeinit
writeglmsr: write msr 0x10000020, val 0x20000000:0x000fff80
writeglmsr: AFTER write msr 0x10000020, val 0x20000000:0x000fff80
writeglmsr: write msr 0x10000021, val 0x20000000:0x080fffe0
writeglmsr: AFTER write msr 0x10000021, val 0x20000000:0x080fffe0
writeglmsr: write msr 0x1000002c, val 0x20000000:0x00000003
writeglmsr: AFTER write msr 0x1000002c, val 0x20000000:0x00000003
sizeram: 10075012:00003400
sizeram: sizem 0x80
SysmemInit: enable for 128m bytes
SysmemInit: AFTER write msr 0x10000028, val 0x20000007:0xfdf00100
sizeram: 10075012:00003400
sizeram: sizem 0x80
sizeram: 10075012:00003400
sizeram: sizem 0x80
SMMGL0Init: 134086656 bytes
SMMGL0Init: offset is 0xc7be0000
SMMGL0Init: AFTER write msr 0x10000026, val 0xfc7be040:0x400fffe0
writeglmsr: write msr 0x10000080, val 0x00000000:0x00000003
writeglmsr: AFTER write msr 0x10000080, val 0x00000000:0x00000003
writeglmsr: write msr 0x40000020, val 0x20000000:0x000fff80
writeglmsr: AFTER write msr 0x40000020, val 0x20000000:0x000fff80
writeglmsr: write msr 0x40000021, val 0x20000000:0x080fffe0
writeglmsr: AFTER write msr 0x40000021, val 0x20000000:0x080fffe0
writeglmsr: write msr 0x4000002d, val 0x20000000:0x00000003
writeglmsr: AFTER write msr 0x4000002d, val 0x20000000:0x00000003
sizeram: 10075012:00003400
sizeram: sizem 0x80
SysmemInit: enable for 128m bytes
SysmemInit: AFTER write msr 0x40000029, val 0x20000007:0xfdf00100
SMMGL1Init:
SMMGL1Init: AFTER write msr 0x40000023, val 0x20000040:0x400fffe0
writeglmsr: write msr 0x40000080, val 0x00000000:0x00000001
writeglmsr: AFTER write msr 0x40000080, val 0x00000000:0x00000001
writeglmsr: write msr 0x400000e3, val 0x60000000:0x033000f0
writeglmsr: AFTER write msr 0x400000e3, val 0x60000000:0x033000f0
GeodeLinkPriority: MSR 0x00002001 is 0x00000000:0x00000320
GeodeLinkPriority: MSR 0x00002001 will be set to 0x00000000:0x00000220
GeodeLinkPriority: MSR 0xc0002001 is 0x00000000:0x00040e80
GeodeLinkPriority: MSR 0xc0002001 will be set to 0x00000000:0x00040000
GeodeLinkPriority: MSR 0x80002001 is 0x00000000:0x00000000
GeodeLinkPriority: MSR 0x80002001 will be set to 0x00000000:0x00000720
GeodeLinkPriority: MSR 0xa0002001 is 0x00000000:0x00000000
GeodeLinkPriority: MSR 0xa0002001 will be set to 0x00000000:0x00000010
GeodeLinkPriority: MSR 0x50002001 is 0x00000000:0x00000000
GeodeLinkPriority: MSR 0x50002001 will be set to 0x00000000:0x00000027
GeodeLinkPriority: MSR 0x4c002001 is 0x00000000:0x00000000
GeodeLinkPriority: MSR 0x4c002001 will be set to 0x00000000:0x00000001
GeodeLinkPriority: MSR 0x54002001 is 0x00000000:0x00000000
GeodeLinkPriority: MSR 0x54002001 will be set to 0x00000000:0x00000622
GeodeLinkPriority: MSR 0x58002001 is 0x00000000:0x00000000
GeodeLinkPriority: MSR 0x58002001 will be set to 0x00000000:0x00000013
GLPCI r1: system msr.lo 0xfdf00100 msr.hi 0x20000007
GLPCI r1: system msr.lo 0x00100130 msr.hi 0x07fdf000
ClockGatingInit: MSR 0x10002004 is 0x00000000:0x00000000
ClockGatingInit: MSR 0x10002004 will be set to 0x00000000:0x00000005
ClockGatingInit: MSR 0x20002004 is 0x00000000:0x00000001
ClockGatingInit: MSR 0x20002004 will be set to 0x00000000:0x00000001
ClockGatingInit: MSR 0x40002004 is 0x00000000:0x00000000
ClockGatingInit: MSR 0x40002004 will be set to 0x00000000:0x00000005
ClockGatingInit: MSR 0x80002004 is 0x00000000:0x00000000
ClockGatingInit: MSR 0x80002004 will be set to 0x00000000:0x00000000
ClockGatingInit: MSR 0xa0002004 is 0x00000000:0x00000000
ClockGatingInit: MSR 0xa0002004 will be set to 0x00000000:0x00000001
ClockGatingInit: MSR 0xc0002004 is 0x00000000:0x00000000
ClockGatingInit: MSR 0xc0002004 will be set to 0x00000000:0x00000155
ClockGatingInit: MSR 0x4c002004 is 0x00000000:0x00000000
ClockGatingInit: MSR 0x4c002004 will be set to 0x00000000:0x00000015
ClockGatingInit: MSR 0x50002004 is 0x00000000:0x00000000
ClockGatingInit: MSR 0x50002004 will be set to 0x00000000:0x00000015
ClockGatingInit: MSR 0x54002004 is 0x00000000:0x00000000
ClockGatingInit: MSR 0x54002004 will be set to 0x00000000:0x00000000
Exit northbridgeinit
Doing cpubug fixes for rev 0x21
CPU_BUG:eng2900
Done cpubug fixes
is_5536: msr.lo is 0x5(==5 means 5536)
is_5536: msr.lo is 0x5(==5 means 5536)
is_5536: msr.lo is 0x5(==5 means 5536)
NOTDOING ChipsetFlashSetup()!!!!!!!!!!!!!!!!!!
is_5536: msr.lo is 0x5(==5 means 5536)
sizeram: 10075012:00003400
sizeram: sizem 0x80
setup_gx2_cache: enable for 131072 KB
msr 0x00001808 will be set to 25fff002:107fe000
MSR 0x10000026 is now 0x2c7be040:0x400fffe0
do_vsmbios
buf 00060000 *buf 186 buf[256k] 95
buf[0x20] signature is b0:10:e6:80
Call real_mode_switch_call_vsm
biosint: INT# 0x15
biosint: eax 0xbea7 ebx 0x4e53 ecx 0x10000026 edx 0x10000028
biosint: ebp 0x15f08 esp 0xff0 edi 0x900000 esi 0x38
biosint: ip 0x5b3 cs 0x6000 flags 0x46
biosint: gs 0x0 fs 0x0 ds 0x6000 es 0x0
handleint21, eax 0xbea7
biosint: INT# 0x15
biosint: eax 0xbea4 ebx 0x4e53 ecx 0x10000026 edx 0x10000028
biosint: ebp 0x15f08 esp 0xfee edi 0x900000 esi 0x38
biosint: ip 0x5c1 cs 0x6000 flags 0x46
biosint: gs 0x0 fs 0x0 ds 0x6000 es 0x0
handleint21, eax 0xbea4
Finding PCI configuration type.
PCI: Using configuration type 1
sizeram: 10075012:00003400
sizeram: sizem 0x80
gx2 north: end enable_dev
PCI_DOMAIN: 0000 enabled
PCI_DOMAIN: 0000 scanning...
PCI: pci_scan_bus for bus 0
PCI: devfn 0x0, bad id 0xffffffff
gx2 north: enable_dev
gx2 north: end enable_dev
PCI: 00:01.0 [100b/0028] ops
PCI: 00:01.0 [100b/0028] enabled
gx2 north: enable_dev
gx2 north: end enable_dev
PCI: 00:01.1 [100b/0030] enabled
PCI: devfn 0xa, bad id 0xffffffff
PCI: devfn 0xb, bad id 0xffffffff
PCI: devfn 0xc, bad id 0xffffffff
PCI: devfn 0xd, bad id 0xffffffff
PCI: devfn 0xe, bad id 0xffffffff
PCI: devfn 0xf, bad id 0xffffffff
PCI: devfn 0x10, bad id 0xffffffff
PCI: devfn 0x18, bad id 0xffffffff
PCI: devfn 0x20, bad id 0xffffffff
PCI: devfn 0x28, bad id 0xffffffff
PCI: devfn 0x30, bad id 0xffffffff
PCI: devfn 0x38, bad id 0xffffffff
PCI: devfn 0x40, bad id 0xffffffff
PCI: devfn 0x48, bad id 0xffffffff
PCI: devfn 0x50, bad id 0xffffffff
PCI: devfn 0x58, bad id 0xffffffff
PCI: devfn 0x60, bad id 0xffffffff
cs5536: southbridge_enable: dev is 0000f720
Disabling static device: PCI: 00:0d.0
PCI: devfn 0x69, bad id 0xffffffff
PCI: devfn 0x6a, bad id 0xffffffff
PCI: devfn 0x6b, bad id 0xffffffff
PCI: devfn 0x6c, bad id 0xffffffff
PCI: devfn 0x6d, bad id 0xffffffff
PCI: devfn 0x6e, bad id 0xffffffff
PCI: devfn 0x6f, bad id 0xffffffff
PCI: devfn 0x70, bad id 0xffffffff
cs5536: southbridge_enable: dev is 0000f9c0
PCI: 00:0f.0 [1022/2090] bus ops
PCI: 00:0f.0 [1022/2090] enabled
PCI: devfn 0x79, bad id 0xffffffff
cs5536: southbridge_enable: dev is 0000fc60
PCI: 00:0f.2 [1022/209a] enabled
cs5536: southbridge_enable: dev is 0000ff00
PCI: 00:0f.3 [1022/2093] enabled
cs5536: southbridge_enable: dev is 000101a0
PCI: 00:0f.4 [1022/2094] enabled
cs5536: southbridge_enable: dev is 00010440
PCI: 00:0f.5 [1022/2095] enabled
malloc Enter, size 668, free_mem_ptr 00016000
malloc 0x00016000
PCI: 00:0f.6 [1022/2096] enabled
malloc Enter, size 668, free_mem_ptr 0001629c
malloc 0x0001629c
PCI: 00:0f.7 [1022/2097] enabled
PCI: devfn 0x80, bad id 0xffffffff
PCI: devfn 0x88, bad id 0xffffffff
PCI: devfn 0x90, bad id 0xffffffff
PCI: devfn 0x98, bad id 0xffffffff
PCI: devfn 0xa0, bad id 0xffffffff
PCI: devfn 0xa8, bad id 0xffffffff
PCI: devfn 0xb0, bad id 0xffffffff
PCI: devfn 0xb8, bad id 0xffffffff
PCI: devfn 0xc0, bad id 0xffffffff
PCI: devfn 0xc8, bad id 0xffffffff
PCI: devfn 0xd0, bad id 0xffffffff
PCI: devfn 0xd8, bad id 0xffffffff
PCI: devfn 0xe0, bad id 0xffffffff
PCI: devfn 0xe8, bad id 0xffffffff
PCI: devfn 0xf0, bad id 0xffffffff
PCI: devfn 0xf8, bad id 0xffffffff
scan_static_bus for PCI: 00:0f.0
scan_static_bus for PCI: 00:0f.0 done
PCI: pci_scan_bus returning with max=00
scan_static_bus for Root Device done
done
Allocating resources...
Reading resources...
Root Device compute_allocate_io: base: 00000400 size: 00000000 align: 0 gran: 0
Root Device read_resources bus 0 link: 0
northbridge.c:pci_domain_read_resources()
PCI_DOMAIN: 0000 read_resources bus 0 link: 0
PCI_DOMAIN: 0000 read_resources bus 0 link: 0 done
Root Device read_resources bus 0 link: 0 done
PCI: 00:0f.0 14 * [0x00000400 - 0x000004ff] io
PCI: 00:0f.0 20 * [0x00000800 - 0x0000087f] io
PCI: 00:0f.3 10 * [0x00000880 - 0x000008ff] io
PCI: 00:0f.0 18 * [0x00000c00 - 0x00000c3f] io
PCI: 00:0f.0 24 * [0x00000c40 - 0x00000c7f] io
PCI: 00:0f.0 1c * [0x00000c80 - 0x00000c9f] io
PCI: 00:0f.2 20 * [0x00000ca0 - 0x00000caf] io
PCI: 00:0f.0 10 * [0x00000cb0 - 0x00000cb7] io
PCI: 00:01.0 10 * [0x00000cc0 - 0x00000cc3] io
Root Device compute_allocate_io: base: 00000cc4 size: 000008c4 align: 8 gran: 0 done
Root Device compute_allocate_mem: base: 00000000 size: 00000000 align: 0 gran: 0
Root Device read_resources bus 0 link: 0
Root Device read_resources bus 0 link: 0 done
PCI: 00:01.1 10 * [0x00000000 - 0x00ffffff] mem
PCI: 00:01.1 14 * [0x01000000 - 0x01003fff] mem
PCI: 00:01.1 18 * [0x01004000 - 0x01007fff] mem
PCI: 00:01.1 1c * [0x01008000 - 0x0100bfff] mem
PCI: 00:0f.6 10 * [0x0100c000 - 0x0100dfff] mem
PCI: 00:0f.4 10 * [0x0100e000 - 0x0100efff] mem
PCI: 00:0f.5 10 * [0x0100f000 - 0x0100ffff] mem
PCI: 00:0f.7 10 * [0x01010000 - 0x01010fff] mem
Root Device compute_allocate_mem: base: 01011000 size: 01011000 align: 24 gran: 0 done
Done reading resources.
Setting resources...
Root Device compute_allocate_io: base: 00001000 size: 000008c4 align: 8 gran: 0
Root Device read_resources bus 0 link: 0
Root Device read_resources bus 0 link: 0 done
PCI: 00:0f.0 14 * [0x00001000 - 0x000010ff] io
PCI: 00:0f.0 20 * [0x00001400 - 0x0000147f] io
PCI: 00:0f.3 10 * [0x00001480 - 0x000014ff] io
PCI: 00:0f.0 18 * [0x00001800 - 0x0000183f] io
PCI: 00:0f.0 24 * [0x00001840 - 0x0000187f] io
PCI: 00:0f.0 1c * [0x00001880 - 0x0000189f] io
PCI: 00:0f.2 20 * [0x000018a0 - 0x000018af] io
PCI: 00:0f.0 10 * [0x000018b0 - 0x000018b7] io
PCI: 00:01.0 10 * [0x000018c0 - 0x000018c3] io
Root Device compute_allocate_io: base: 000018c4 size: 000008c4 align: 8 gran: 0 done
Root Device compute_allocate_mem: base: fd000000 size: 01011000 align: 24 gran: 0
Root Device read_resources bus 0 link: 0
Root Device read_resources bus 0 link: 0 done
PCI: 00:01.1 10 * [0xfd000000 - 0xfdffffff] mem
PCI: 00:01.1 14 * [0xfe000000 - 0xfe003fff] mem
PCI: 00:01.1 18 * [0xfe004000 - 0xfe007fff] mem
PCI: 00:01.1 1c * [0xfe008000 - 0xfe00bfff] mem
PCI: 00:0f.6 10 * [0xfe00c000 - 0xfe00dfff] mem
PCI: 00:0f.4 10 * [0xfe00e000 - 0xfe00efff] mem
PCI: 00:0f.5 10 * [0xfe00f000 - 0xfe00ffff] mem
PCI: 00:0f.7 10 * [0xfe010000 - 0xfe010fff] mem
Root Device compute_allocate_mem: base: fe011000 size: 01011000 align: 24 gran: 0 done
Root Device assign_resources, bus 0 link: 0
PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0
PCI: 00:01.1 10 <- [0x00fd000000 - 0x00fdffffff] mem
PCI: 00:01.1 14 <- [0x00fe000000 - 0x00fe003fff] mem
PCI: 00:01.1 18 <- [0x00fe004000 - 0x00fe007fff] mem
PCI: 00:01.1 1c <- [0x00fe008000 - 0x00fe00bfff] mem
PCI: 00:0f.0 10 <- [0x00000018b0 - 0x00000018b7] io
PCI: 00:0f.0 14 <- [0x0000001000 - 0x00000010ff] io
PCI: 00:0f.0 18 <- [0x0000001800 - 0x000000183f] io
PCI: 00:0f.0 1c <- [0x0000001880 - 0x000000189f] io
PCI: 00:0f.0 20 <- [0x0000001400 - 0x000000147f] io
PCI: 00:0f.0 24 <- [0x0000001840 - 0x000000187f] io
PCI: 00:0f.2 20 <- [0x00000018a0 - 0x00000018af] io
PCI: 00:0f.3 10 <- [0x0000001480 - 0x00000014ff] io
PCI: 00:0f.4 10 <- [0x00fe00e000 - 0x00fe00efff] mem
PCI: 00:0f.5 10 <- [0x00fe00f000 - 0x00fe00ffff] mem
PCI: 00:0f.6 10 <- [0x00fe00c000 - 0x00fe00dfff] mem
PCI: 00:0f.7 10 <- [0x00fe010000 - 0x00fe010fff] mem
PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0
Root Device assign_resources, bus 0 link: 0
Done setting resources.
Done allocating resources.
Enabling resources...
PCI: 00:01.0 cmd <- 145
PCI: 00:01.1 subsystem <- 00/00
PCI: 00:01.1 cmd <- 143
cs5536: cs5536_pci_dev_enable_resources()
PCI: 00:0f.0 cmd <- 149
PCI: 00:0f.2 subsystem <- 00/00
PCI: 00:0f.2 cmd <- 141
PCI: 00:0f.3 subsystem <- 00/00
PCI: 00:0f.3 cmd <- 141
PCI: 00:0f.4 subsystem <- 00/00
PCI: 00:0f.4 cmd <- 142
PCI: 00:0f.5 subsystem <- 00/00
PCI: 00:0f.5 cmd <- 142
PCI: 00:0f.6 cmd <- 142
PCI: 00:0f.7 cmd <- 142
done.
Initializing devices...
Root Device init
OLPC REVA ENTER init
OLPC REVA EXIT init
APIC_CLUSTER: 0 init
malloc Enter, size 668, free_mem_ptr 00016538
malloc 0x00016538
Initializing CPU #0
CPU: vendor NSC device 552
model_gx2_init
Enabling cache
model_gx2_init DONE
CPU #0 Initialized
PCI: 00:01.0 init
northbridge: northbridge_init()
irq_init_steering(0000F180 [8000785C], AA5B)
PCI: 00:01.1 init
PCI: 00:0f.0 init
cs5536: southbridge_init
cs5536: southbridge_init: enable uarta, msr MDD_IRQM_YHIGH(51400021)
cs5536: southbridge_init: enable_ide_nand_flash is 1
cs5536: enable_ide_nand_flash
WARNING: using deprecated flash enable mechanism
MDD_LBAR_FLSH0 was 0x0000000000000000
MDD_LBAR_FLSH0 is 0xfffff00720000000
MDD_PIN_OPT was 0x0000000000000f7d
MDD_PIN_OPT is 0x0000000000000f7c
MDD_NANDF_DATA was 0x0000000007770777
MDD_NANDF_DATA is 0x0000000000100010
MDD_NADF_CNTL was 0x0000000000000777
MDD_NADF_CNTL is 0x0000000000000010
cs5536: EXIT enable_ide_nand_flash
Assigning IRQ 5 to 0:f.3
Readback = 5
pci_level_irq: current ints are 0x0
pci_level_irq: try to set ints 0x20
pci_level_irq: lower order bits are wrong: want 0x0, got 0x20
Assigning IRQ 10 to 0:f.4
Readback = 10
pci_level_irq: current ints are 0x20
pci_level_irq: try to set ints 0x420
pci_level_irq: lower order bits are wrong: want 0x0, got 0x20
Assigning IRQ 10 to 0:f.5
Readback = 10
pci_level_irq: current ints are 0x420
pci_level_irq: try to set ints 0x420
pci_level_irq: lower order bits are wrong: want 0x0, got 0x20
Assigning IRQ 10 to 0:f.6
Readback = 10
pci_level_irq: current ints are 0x420
pci_level_irq: try to set ints 0x420
pci_level_irq: lower order bits are wrong: want 0x0, got 0x20
Assigning IRQ 10 to 0:f.7
Readback = 10
pci_level_irq: current ints are 0x420
pci_level_irq: try to set ints 0x420
pci_level_irq: lower order bits are wrong: want 0x0, got 0x20
Disabling VPCI device: 0x80007E00
Disabling VPCI device: 0x80007F00
PCI: 00:0f.2 init
PCI: 00:0f.3 init
PCI: 00:0f.4 init
PCI: 00:0f.5 init
PCI: 00:0f.6 init
PCI: 00:0f.7 init
Devices initialized
Copying IRQ routing tables to 0xf0000...done.
Verifing copy of IRQ routing tables at 0xf0000...failed
Moving GDT to 0x500...ok
Wrote linuxbios table at: 00000530 - 000006d8 checksum b818
Welcome to elfboot, the open sourced starter.
January 2002, Eric Biederman.
Version 1.3
rom_stream: 0xfff20000 - 0xffff7fff
Found ELF candiate at offset 0
header_offset is 0
Try to load at offset 0x0
n_type: 00000001 n_name(8): ELFBoot n_desc(6): Linux
n_type: 00000002 n_name(8): ELFBoot n_desc(88): 2.6.18-rc4jhc ([EMAIL PROTECTED]) #1 Thu Aug 24 19:15:59 EDT 2006
malloc Enter, size 20, free_mem_ptr 000167d4
malloc 0x000167d4
n_type: 00000003 n_name(8): ELFBoot n_desc(2): z
Dropping non PT_LOAD segment
malloc Enter, size 32, free_mem_ptr 000167e8
malloc 0x000167e8
New segment addr 0x10000 size 0x1ab24 offset 0x174 filesize 0x561c
(cleaned up) New segment addr 0x10000 size 0x1ab24 offset 0x174 filesize 0x561c
lb: [0x0000000000004000, 0x000000000001a000)
segment: [0x0000000000010000, 0x000000000001561c, 0x000000000002ab24)
malloc Enter, size 32, free_mem_ptr 00016808
malloc 0x00016808
late: [0x000000000001a000, 0x000000000001a000, 0x000000000002ab24)
bounce: [0x00000000077c0000, 0x00000000077c561c, 0x00000000077ca000)
malloc Enter, size 32, free_mem_ptr 00016828
malloc 0x00016828
New segment addr 0x91000 size 0x70 offset 0x5790 filesize 0x0
(cleaned up) New segment addr 0x91000 size 0x70 offset 0x5790 filesize 0x0
lb: [0x0000000000004000, 0x000000000001a000)
malloc Enter, size 32, free_mem_ptr 00016848
malloc 0x00016848
New segment addr 0x100000 size 0x700000 offset 0x5790 filesize 0x90241
(cleaned up) New segment addr 0x100000 size 0x700000 offset 0x5790 filesize 0x90241
lb: [0x0000000000004000, 0x000000000001a000)
malloc Enter, size 32, free_mem_ptr 00016868
malloc 0x00016868
New segment addr 0x800000 size 0x34525 offset 0x959d1 filesize 0x34525
(cleaned up) New segment addr 0x800000 size 0x34525 offset 0x959d1 filesize 0x34525
lb: [0x0000000000004000, 0x000000000001a000)
Loading Segment: addr: 0x00000000077c0000 memsz: 0x000000000000a000 filesz: 0x000000000000561c
[ 0x00000000077c0000, 00000000077c561c, 0x00000000077ca000) <- 0000000000000174
Clearing Segment: addr: 0x00000000077c561c memsz: 0x00000000000049e4
Loading Segment: addr: 0x0000000000091000 memsz: 0x0000000000000070 filesz: 0x0000000000000000
[ 0x0000000000091000, 0000000000091000, 0x0000000000091070) <- 0000000000005790
Clearing Segment: addr: 0x0000000000091000 memsz: 0x0000000000000070
Loading Segment: addr: 0x0000000000100000 memsz: 0x0000000000700000 filesz: 0x0000000000090241
[ 0x0000000000100000, 0000000000190241, 0x0000000000800000) <- 0000000000005790
Clearing Segment: addr: 0x0000000000190241 memsz: 0x000000000066fdbf
Loading Segment: addr: 0x000000000001a000 memsz: 0x0000000000010b24 filesz: 0x0000000000000000
[ 0x000000000001a000, 000000000001a000, 0x000000000002ab24) <- 00000000000959d1
Clearing Segment: addr: 0x000000000001a000 memsz: 0x0000000000010b24
Loading Segment: addr: 0x0000000000800000 memsz: 0x0000000000034525 filesz: 0x0000000000034525
[ 0x0000000000800000, 0000000000834525, 0x0000000000834525) <- 00000000000959d1
Loaded segments
verified segments
closed down stream
Jumping to boot code at 0x10000
entry = 0x00010000
lb_start = 0x00004000
lb_size = 0x00016000
adjust = 0x077c6000
buffer = 0x077b4000
elf_boot_notes = 0x00010760
adjusted_boot_notes = 0x077d6760
Firmware type: LinuxBIOS
Linux version 2.6.18-rc4jhc ([EMAIL PROTECTED]) (gcc version 4.1.1 20060817 (Red Hat 4.1.1-18)) #1 Thu Aug 24 19:15:59 EDT 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000000744 (reserved)
BIOS-e820: 0000000000000744 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 00000000000f0400 (reserved)
BIOS-e820: 0000000000100000 - 00000000077e0000 (usable)
user-defined physical RAM map:
user: 0000000000000000 - 0000000000000744 (reserved)
user: 0000000000000744 - 00000000000a0000 (usable)
user: 00000000000f0000 - 00000000000f0400 (reserved)
user: 0000000000100000 - 0000000007700000 (usable)
119MB LOWMEM available.
DMI not present or invalid.
Allocating PCI resources starting at 10000000 (gap: 07700000:f8900000)
Detected 398.438 MHz processor.
Built 1 zonelists. Total pages: 30464
Kernel command line: console=ttyS0,115200 video=gxfb:1024x768 mem=119m rdinit=/linuxrc
Initializing CPU#0
PID hash table entries: 512 (order: 9, 2048 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 118964k/121856k available (765k kernel code, 2424k reserved, 173k data, 104k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 798.00 BogoMIPS (lpj=3990014)
Mount-cache hash table entries: 512
CPU: L1 I Cache: 16K (32 bytes/line), D cache 16K (32 bytes/line)
CPU: NSC Geode(TM) Integrated Processor by National Semi stepping 02
Checking 'hlt' instruction... OK.
Unpacking initramfs... done
Freeing initrd memory: 209k freed
PCI: Using configuration type 1
Setting up standard PCI resources
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Ignore bogus resource 6 [0:0] of 0000:00:01.1
JFFS2 version 2.2. (NAND) (SUMMARY) (C) 2001-2006 Red Hat, Inc.
io scheduler noop registered (default)
gxfb 0000:00:01.1: 8192 Kibyte of video memory at 0xfd000000
Console: switching to colour frame buffer device 128x96
fb0: Geode GX frame buffer device
Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
Probing CS553x NAND controller CS#0 at MMIO 0x20000000
NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
ohci_hcd 0000:00:0f.4: OHCI Host Controller
ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:0f.4: irq 10, io mem 0xfe00e000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Using IPI Shortcut mode
Freeing unused kernel memory: 104k freed
Time: tsc clocksource has been installed.
usb 1-1: new full speed USB device using ohci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-2: new full speed USB device using ohci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 1 port detected
usb 1-1.2: new low speed USB device using ohci_hcd and address 4
usb 1-1.2: configuration #1 chosen from 1 choice
input: HID 1267:0103 as /class/input/input0
input: USB HID v1.10 Keyboard [HID 1267:0103] on usb-0000:00:0f.4-1.2
input: HID 1267:0103 as /class/input/input1
input: USB HID v1.10 Device [HID 1267:0103] on usb-0000:00:0f.4-1.2
usb 1-1.4: new full speed USB device using ohci_hcd and address 5
usb 1-1.4: configuration #1 chosen from 1 choice
usb 1-2.1: new full speed USB device using ohci_hcd and address 6
usb 1-2.1: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: Corsair Model: Flash Voyager Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 8011776 512-byte hdwr sectors (4102 MB)
sda: Write Protect is off
sda: assuming drive cache: write through
SCSI device sda: 8011776 512-byte hdwr sectors (4102 MB)
sda: Write Protect is off
sda: assuming drive cache: write through
sda: sda1
sd 0:0:0:0: Attached scsi removable disk sda
usb 1-2: USB disconnect, address 3
usb 1-2.1: USB disconnect, address 6
usb 1-2: new full speed USB device using ohci_hcd and address 7
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 1 port detected
usb 1-2.1: new full speed USB device using ohci_hcd and address 8
usb 1-2.1: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: Corsair Model: Flash Voyager Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 8011776 512-byte hdwr sectors (4102 MB)
sda: Write Protect is off
sda: assuming drive cache: write through
SCSI device sda: 8011776 512-byte hdwr sectors (4102 MB)
sda: Write Protect is off
sda: assuming drive cache: write through
sda: sda1
sd 1:0:0:0: Attached scsi removable disk sda
_______________________________________________
Devel mailing list
[email protected]
http://mailman.laptop.org/mailman/listinfo/devel
