On Fri, 8 Sep 2006, Marcelo Tosatti wrote:
On Fri, Sep 08, 2006 at 01:54:16PM +1000, James Cameron wrote:
Have you been able to reproduce this on build 81 binaries?
Yes, you probably won't reproduce it there.
supat, are you using the latest git libertas tree?
Dear Marcelo Tosatti,
I don't know where can I get build 81 binaries.
I don't know where is the latest git libertas tree too.
What I can do is to put your latest modules and kernel in to slackware
10.2 under /dev/sda1.
I can gave you intact usb_slack.tgz for the test if you wish.
At this moment I flash to Linux BIOS and plug in rtl8150 as a network in
replace of usb8xxx.
The device dir contain exactly below:
==================================
console nvram ram4 snd tty17 tty3 tty42 tty55 urandom
usbdev2.1_ep81
event0 port ram5 stderr tty18 tty30 tty43 tty56 usbdev1.1
usbdev2.2
event1 ptmx ram6 stdin tty19 tty31 tty44 tty57
usbdev1.1_ep00 usbdev2.2_ep00
event2 pts ram7 stdout tty2 tty32 tty45 tty58
usbdev1.1_ep81 usbdev2.2_ep81
fb0 ram0 ram8 tty tty20 tty33 tty46 tty59 usbdev1.2
usbdev2.2_ep82
fd ram1 ram9 tty0 tty21 tty34 tty47 tty6
usbdev1.2_ep00 usbdev2.3
full ram10 random tty1 tty22 tty35 tty48 tty60
usbdev1.2_ep02 usbdev2.3_ep00
initctl ram11 root tty10 tty23 tty36 tty49 tty61
usbdev1.2_ep81 usbdev2.3_ep81
kmsg ram12 rtc tty11 tty24 tty37 tty5 tty62 usbdev1.5
vcs
log ram13 sda tty12 tty25 tty38 tty50 tty63
usbdev1.5_ep00 vcs1
mem ram14 sda1 tty13 tty26 tty39 tty51 tty7
usbdev1.5_ep02 vcsa
mice ram15 sda2 tty14 tty27 tty4 tty52 tty8
usbdev1.5_ep83 vcsa1
mouse0 ram2 shm tty15 tty28 tty40 tty53 tty9 usbdev2.1
zero
null ram3 snapshot tty16 tty29 tty41 tty54 ttyS0
usbdev2.1_ep00
=============================
It was different from fedora because /dev/bus/usb did not exist.
Is that the problem? (slackware cannot bring up /dev/bus/usb by hotplug)
The content of /proc/bus/usb/device are exactly below:
=====================================================================
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 4
B: Alloc= 28/900 us ( 3%), #Int= 3, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.17-1.2608.olpc1 ohci_hcd
S: Product=OHCI Host Controller
S: SerialNumber=0000:00:0f.4
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0bda ProdID=8150 Rev= 1.00
S: Manufacturer=Compex
S: Product=USB To LAN Converter
S: SerialNumber=0142
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=120mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=rtl8150
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=1ms
T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 5 Spd=1.5 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=04d9 ProdID=1203 Rev= 2.60
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 4
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.17-1.2608.olpc1 ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:0f.5
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=13fe ProdID=1a00 Rev= 1.00
S: Manufacturer=Kingston
S: Product=DataTraveler 2.0
S: SerialNumber=5B64050003AE
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 5 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1286 ProdID=2001 Rev=31.02
S: Manufacturer=Marvell
S: Product=MARVELL Wireless Device
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
==================================================================
The different between fedora and slackware is fedora report
Driver=(usb8xxx) while slackware report Driver=(none)
At this moment you can :
telnet 158.108.200.200 110
login zxc
passwd love4linux
And verify my words if you wish because I plug in usb eth0 to do wireless
duty.
Regards,
supat
_______________________________________________
Devel mailing list
[email protected]
http://mailman.laptop.org/mailman/listinfo/devel
