Patches wbusb.c to replace printk usage (missing KERN_ levels) with pr_info.
Signed-off-by: Mike Sheldon <[email protected]> --- drivers/staging/winbond/wbusb.c | 20 ++++++++++---------- 1 files changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c index 681419d..1bad709 100644 --- a/drivers/staging/winbond/wbusb.c +++ b/drivers/staging/winbond/wbusb.c @@ -77,18 +77,18 @@ static int wbsoft_add_interface(struct ieee80211_hw *dev, static void wbsoft_remove_interface(struct ieee80211_hw *dev, struct ieee80211_vif *vif) { - printk("wbsoft_remove interface called\n"); + pr_info("wbsoft_remove interface called\n"); } static void wbsoft_stop(struct ieee80211_hw *hw) { - printk(KERN_INFO "%s called\n", __func__); + pr_info("%s called\n", __func__); } static int wbsoft_get_stats(struct ieee80211_hw *hw, struct ieee80211_low_level_stats *stats) { - printk(KERN_INFO "%s called\n", __func__); + pr_info("%s called\n", __func__); return 0; } @@ -159,13 +159,13 @@ static void hal_set_current_channel_ex(struct hw_data *pHwData, struct chan_info if (pHwData->SurpriseRemove) return; - printk("Going to channel: %d/%d\n", channel.band, channel.ChanNo); + pr_info("Going to channel: %d/%d\n", channel.band, channel.ChanNo); RFSynthesizer_SwitchingChannel(pHwData, channel); /* Switch channel */ pHwData->Channel = channel.ChanNo; pHwData->band = channel.band; #ifdef _PE_STATE_DUMP_ - printk("Set channel is %d, band =%d\n", pHwData->Channel, + pr_info("Set channel is %d, band =%d\n", pHwData->Channel, pHwData->band); #endif reg->M28_MacControl &= ~0xff; /* Clean channel information field */ @@ -247,7 +247,7 @@ static int wbsoft_config(struct ieee80211_hw *dev, u32 changed) struct wbsoft_priv *priv = dev->priv; struct chan_info ch; - printk("wbsoft_config called\n"); + pr_info("wbsoft_config called\n"); /* Should use channel_num, or something, as that is already pre-translated */ ch.band = 1; @@ -265,7 +265,7 @@ static int wbsoft_config(struct ieee80211_hw *dev, u32 changed) static u64 wbsoft_get_tsf(struct ieee80211_hw *dev) { - printk("wbsoft_get_tsf called\n"); + pr_info("wbsoft_get_tsf called\n"); return 0; } @@ -718,7 +718,7 @@ static int wb35_hw_init(struct ieee80211_hw *hw) priv->sLocalPara.bAntennaNo = hal_get_antenna_number(pHwData); #ifdef _PE_STATE_DUMP_ - printk("Driver init, antenna no = %d\n", psLOCAL->bAntennaNo); + pr_info("Driver init, antenna no = %d\n", psLOCAL->bAntennaNo); #endif hal_get_hw_radio_off(pHwData); @@ -792,7 +792,7 @@ static int wb35_probe(struct usb_interface *intf, endpoint = &interface->endpoint[0].desc; if (endpoint[2].wMaxPacketSize == 512) { - printk("[w35und] Working on USB 2.0\n"); + pr_info("[w35und] Working on USB 2.0\n"); pWbUsb->IsUsb20 = 1; } @@ -850,7 +850,7 @@ static void wb35_hw_halt(struct wbsoft_priv *adapter) /* Turn off Rx and Tx hardware ability */ hal_stop(&adapter->sHwData); #ifdef _PE_USB_INI_DUMP_ - printk("[w35und] Hal_stop O.K.\n"); + pr_info("[w35und] Hal_stop O.K.\n"); #endif /* Waiting Irp completed */ msleep(100); -- 1.7.0.4 _______________________________________________ devel mailing list [email protected] http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
