[email protected] wrote: > From: Nanakos Chrysostomos <[email protected]> > > This patch resolves checkpatch.pl issues in the vme_user.c file. >
Hi Nanakos, Thanks for your making the changes, one last niggling issue please see below Martyn > Signed-off-by: Nanakos Chrysostomos <[email protected]> > --- > drivers/staging/vme/devices/vme_user.c | 96 > ++++++++++++++++---------------- > 1 files changed, 47 insertions(+), 49 deletions(-) > > diff --git a/drivers/staging/vme/devices/vme_user.c > b/drivers/staging/vme/devices/vme_user.c > index bc16fc0..b44d261 100644 > --- a/drivers/staging/vme/devices/vme_user.c > +++ b/drivers/staging/vme/devices/vme_user.c > @@ -34,8 +34,8 @@ > #include <linux/smp_lock.h> > #include <linux/types.h> > > -#include <asm/io.h> > -#include <asm/uaccess.h> > +#include <linux/io.h> > +#include <linux/uaccess.h> > > #include "../vme.h" > #include "vme_user.h" > @@ -48,19 +48,19 @@ static int bus_num; > /* Currently Documentation/devices.txt defines the following for VME: > * > * 221 char VME bus > - * 0 = /dev/bus/vme/m0 First master image > - * 1 = /dev/bus/vme/m1 Second master image > - * 2 = /dev/bus/vme/m2 Third master image > - * 3 = /dev/bus/vme/m3 Fourth master image > - * 4 = /dev/bus/vme/s0 First slave image > - * 5 = /dev/bus/vme/s1 Second slave image > - * 6 = /dev/bus/vme/s2 Third slave image > - * 7 = /dev/bus/vme/s3 Fourth slave image > - * 8 = /dev/bus/vme/ctl Control > + * 0 = /dev/bus/vme/m0 First master image > + * 1 = /dev/bus/vme/m1 Second master image > + * 2 = /dev/bus/vme/m2 Third master image > + * 3 = /dev/bus/vme/m3 Fourth master image > + * 4 = /dev/bus/vme/s0 First slave image > + * 5 = /dev/bus/vme/s1 Second slave image > + * 6 = /dev/bus/vme/s2 Third slave image > + * 7 = /dev/bus/vme/s3 Fourth slave image > + * 8 = /dev/bus/vme/ctl Control > * > - * It is expected that all VME bus drivers will use the > - * same interface. For interface documentation see > - * http://www.vmelinux.org/. > + * It is expected that all VME bus drivers will use the > + * same interface. For interface documentation see > + * http://www.vmelinux.org/. > * > * However the VME driver at http://www.vmelinux.org/ is rather old and > doesn't > * even support the tsi148 chipset (which has 8 master and 8 slave windows). > @@ -137,12 +137,12 @@ static int __init vme_user_probe(struct device *, int, > int); > static int __exit vme_user_remove(struct device *, int, int); > > static struct file_operations vme_user_fops = { > - .open = vme_user_open, > - .release = vme_user_release, > - .read = vme_user_read, > - .write = vme_user_write, > - .llseek = vme_user_llseek, > - .unlocked_ioctl = vme_user_unlocked_ioctl, > + .open = vme_user_open, > + .release = vme_user_release, > + .read = vme_user_read, > + .write = vme_user_write, > + .llseek = vme_user_llseek, > + .unlocked_ioctl = vme_user_unlocked_ioctl, > }; > > > @@ -151,13 +151,13 @@ static struct file_operations vme_user_fops = { > */ > static void reset_counters(void) > { > - statistics.reads = 0; > - statistics.writes = 0; > - statistics.ioctls = 0; > - statistics.irqs = 0; > - statistics.berrs = 0; > - statistics.dmaErrors = 0; > - statistics.timeouts = 0; > + statistics.reads = 0; > + statistics.writes = 0; > + statistics.ioctls = 0; > + statistics.irqs = 0; > + statistics.berrs = 0; > + statistics.dmaErrors = 0; > + statistics.timeouts = 0; > } > > static int vme_user_open(struct inode *inode, struct file *file) > @@ -216,21 +216,20 @@ static ssize_t resource_to_user(int minor, char __user > *buf, size_t count, > /* We copy to kernel buffer */ > copied = vme_master_read(image[minor].resource, > image[minor].kern_buf, count, *ppos); > - if (copied < 0) { > + if (copied < 0) > return (int)copied; > - } > > retval = __copy_to_user(buf, image[minor].kern_buf, > (unsigned long)copied); > if (retval != 0) { > copied = (copied - retval); > - printk("User copy failed\n"); > + printk(KERN_WARNING "User copy failed\n"); > return -EINVAL; > } > > } else { > /* XXX Need to write this */ > - printk("Currently don't support large transfers\n"); > + printk(KERN_WARNING "Currently don't support large > transfers\n"); > /* Map in pages from userspace */ > > /* Call vme_master_read to do the transfer */ > @@ -264,7 +263,7 @@ static ssize_t resource_from_user(unsigned int minor, > const char *buf, > image[minor].kern_buf, copied, *ppos); > } else { > /* XXX Need to write this */ > - printk("Currently don't support large transfers\n"); > + printk(KERN_WARNING "Currently don't support large > transfers\n"); > /* Map in pages from userspace */ > > /* Call vme_master_write to do the transfer */ > @@ -313,7 +312,7 @@ static ssize_t buffer_from_user(unsigned int minor, const > char *buf, > } > > static ssize_t vme_user_read(struct file *file, char *buf, size_t count, > - loff_t * ppos) > + loff_t *ppos) > { > unsigned int minor = MINOR(file->f_dentry->d_inode->i_rdev); > ssize_t retval; > @@ -337,7 +336,7 @@ static ssize_t vme_user_read(struct file *file, char > *buf, size_t count, > else > okcount = count; > > - switch (type[minor]){ > + switch (type[minor]) { > case MASTER_MINOR: > retval = resource_to_user(minor, buf, okcount, ppos); > break; > @@ -380,7 +379,7 @@ static ssize_t vme_user_write(struct file *file, const > char *buf, size_t count, > else > okcount = count; > > - switch (type[minor]){ > + switch (type[minor]) { > case MASTER_MINOR: > retval = resource_from_user(minor, buf, okcount, ppos); > break; > @@ -571,7 +570,7 @@ vme_user_unlocked_ioctl(struct file *file, unsigned int > cmd, unsigned long arg) > /* > * Unallocate a previously allocated buffer > */ > -static void buf_unalloc (int num) > +static void buf_unalloc(int num) > { > if (image[num].kern_buf) { > #ifdef VME_DEBUG > @@ -594,8 +593,8 @@ static void buf_unalloc (int num) > } > > static struct vme_driver vme_user_driver = { > - .name = driver_name, > - .probe = vme_user_probe, > + .name = driver_name, > + .probe = vme_user_probe, > .remove = vme_user_remove, > }; > > @@ -770,16 +769,16 @@ static int __init vme_user_probe(struct device *dev, > int cur_bus, int cur_slot) > } > > /* Add sysfs Entries */ > - for (i=0; i<VME_DEVS; i++) { > + for (i = 0; i < VME_DEVS; i++) { > switch (type[i]) { > case MASTER_MINOR: > - sprintf(name,"bus/vme/m%%d"); > + sprintf(name, "bus/vme/m%%d"); > break; > case CONTROL_MINOR: > - sprintf(name,"bus/vme/ctl"); > + sprintf(name, "bus/vme/ctl"); > break; > case SLAVE_MINOR: > - sprintf(name,"bus/vme/s%%d"); > + sprintf(name, "bus/vme/s%%d"); > break; > default: > err = -EINVAL; > @@ -788,11 +787,11 @@ static int __init vme_user_probe(struct device *dev, > int cur_bus, int cur_slot) > } > > image[i].device = > - device_create(vme_user_sysfs_class, NULL, > - MKDEV(VME_MAJOR, i), NULL, name, > - (type[i] == SLAVE_MINOR)? i - (MASTER_MAX + 1) > : i); > + device_create(vme_user_sysfs_class, NULL, > + MKDEV(VME_MAJOR, i), NULL, name, > + (type[i] == SLAVE_MINOR) ? i - (MASTER_MAX + 1) : i); > I'd personally prefer that this was left to go over 80 characters, rather than potentially confusing anyone trying to edit this portion. I'd be very happy with a patch without this change. > if (IS_ERR(image[i].device)) { > - printk("%s: Error creating sysfs device\n", > + printk(KERN_WARNING "%s: Error creating sysfs device\n", > driver_name); > err = PTR_ERR(image[i].device); > goto err_sysfs; > @@ -804,7 +803,7 @@ static int __init vme_user_probe(struct device *dev, int > cur_bus, int cur_slot) > /* Ensure counter set correcty to destroy all sysfs devices */ > i = VME_DEVS; > err_sysfs: > - while (i > 0){ > + while (i > 0) { > i--; > device_destroy(vme_user_sysfs_class, MKDEV(VME_MAJOR, i)); > } > @@ -845,9 +844,8 @@ static int __exit vme_user_remove(struct device *dev, int > cur_bus, int cur_slot) > int i; > > /* Remove sysfs Entries */ > - for(i=0; i<VME_DEVS; i++) { > + for (i = 0; i < VME_DEVS; i++) > device_destroy(vme_user_sysfs_class, MKDEV(VME_MAJOR, i)); > - } > class_destroy(vme_user_sysfs_class); > > for (i = MASTER_MINOR; i < (MASTER_MAX + 1); i++) > -- Martyn Welch (Principal Software Engineer) | Registered in England and GE Intelligent Platforms | Wales (3828642) at 100 T +44(0)127322748 | Barbirolli Square, Manchester, E [email protected] | M2 3AB VAT:GB 927559189 _______________________________________________ devel mailing list [email protected] http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
