Hello,
In today linux-next I got a compilation warning:
drivers/staging/quatech_usb2/quatech_usb2.c:1852: warning: ‘qt2_box_flush’
defined but not used
Since -next is an integration three, maybe this function is going to be used.
But anyway I send a patch that fix the warning removing the qt2_box_flush
function just in case.
Thanks a lot.
Javier
Signed-off-by: Javier Martinez Canillas <martinez.jav...@gmail.com>
---
drivers/staging/quatech_usb2/quatech_usb2.c | 24 +-----------------------
1 files changed, 1 insertions(+), 23 deletions(-)
diff --git a/drivers/staging/quatech_usb2/quatech_usb2.c
b/drivers/staging/quatech_usb2/quatech_usb2.c
index ecd7313..9838ea2 100644
--- a/drivers/staging/quatech_usb2/quatech_usb2.c
+++ b/drivers/staging/quatech_usb2/quatech_usb2.c
@@ -258,8 +258,6 @@ static int qt2_box_get_register(struct usb_serial *serial,
static int qt2_box_set_register(struct usb_serial *serial,
unsigned short Uart_Number, unsigned short Register_Num,
unsigned short Value);
-static int qt2_box_flush(struct usb_serial *serial, unsigned char uart_number,
- unsigned short rcv_or_xmit);
static int qt2_boxsetuart(struct usb_serial *serial, unsigned short
Uart_Number,
unsigned short default_divisor, unsigned char default_LCR);
static int qt2_boxsethw_flowctl(struct usb_serial *serial,
@@ -645,9 +643,6 @@ static void qt2_close(struct usb_serial_port *port)
/* get the device private data */
port_extra = qt2_get_port_private(port); /* port private data */
- /* we don't need to force flush though the hardware, so we skip using
- * qt2_box_flush() here */
-
/* we can now (and only now) stop reading data */
port_extra->close_pending = true;
dbg("%s(): port_extra->close_pending = true", __func__);
@@ -1841,24 +1836,6 @@ static int qt2_box_set_register(struct usb_serial
*serial,
return result;
}
-
-/** @brief Request the Tx or Rx buffers on the USB side be flushed
- *
- * Tx flush: When all the currently buffered data has been sent, send an escape
- * sequence back up the data stream to us
- * Rx flush: add a flag in the data stream now so we know when it's made it's
- * way up to us.
- */
-static int qt2_box_flush(struct usb_serial *serial, unsigned char uart_number,
- unsigned short rcv_or_xmit)
-{
- int result;
- result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
- QT2_FLUSH_DEVICE, 0x40, rcv_or_xmit, uart_number, NULL, 0,
- 300);
- return result;
-}
-
/** qt2_boxsetuart - Issue a SET_UART vendor-spcific request on the default
* control pipe. If successful sets baud rate divisor and LCR value.
*/
@@ -1873,6 +1850,7 @@ static int qt2_boxsetuart(struct usb_serial *serial,
unsigned short Uart_Number,
QT2_GET_SET_UART, 0x40, default_divisor, UartNumandLCR,
NULL, 0, 300);
}
+
/** qt2_boxsethw_flowctl - Turn hardware (RTS/CTS) flow control on and off for
* a hardware UART.
*/
--
1.7.0.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
