Signed-off-by: Mike McCormack <[email protected]>
---
 drivers/staging/rtl8192e/r8192E_core.c |    3 --
 drivers/staging/rtl8192e/r8192E_dm.c   |   33 +------------------------------
 2 files changed, 2 insertions(+), 34 deletions(-)

diff --git a/drivers/staging/rtl8192e/r8192E_core.c 
b/drivers/staging/rtl8192e/r8192E_core.c
index 9a6dc73..c408f42 100644
--- a/drivers/staging/rtl8192e/r8192E_core.c
+++ b/drivers/staging/rtl8192e/r8192E_core.c
@@ -58,9 +58,6 @@
 #include "r819xE_phyreg.h"
 #include "r819xE_cmdpkt.h"
 #include "r8192E_dm.h"
-//#include "r8192xU_phyreg.h"
-//#include <linux/usb.h>
-// FIXME: check if 2.6.7 is ok
 
 #ifdef CONFIG_PM
 #include "r8192_pm.h"
diff --git a/drivers/staging/rtl8192e/r8192E_dm.c 
b/drivers/staging/rtl8192e/r8192E_dm.c
index ee3fc22..aa52c6b 100644
--- a/drivers/staging/rtl8192e/r8192E_dm.c
+++ b/drivers/staging/rtl8192e/r8192E_dm.c
@@ -21,7 +21,7 @@ Major Change History:
 #include "r8190_rtl8256.h"
 
 #define DRV_NAME "rtl819xE"
-/*---------------------------Define Local Constant---------------------------*/
+
 //
 // Indicate different AP vendor for IOT issue.
 //
@@ -46,19 +46,11 @@ static const u32 edca_setting_UL[HT_IOT_PEER_MAX] =
 
 #define RTK_UL_EDCA 0xa44f
 #define RTK_DL_EDCA 0x5e4322
-/*---------------------------Define Local Constant---------------------------*/
 
 
-/*------------------------Define global variable-----------------------------*/
-// Debug variable ?
 dig_t  dm_digtable;
 // For Dynamic Rx Path Selection by Signal Strength
 DRxPathSel     DM_RxPathSelTable;
-/*------------------------Define global variable-----------------------------*/
-
-
-/*------------------------Define local variable------------------------------*/
-/*------------------------Define local variable------------------------------*/
 
 
 /*--------------------Define export function prototype-----------------------*/
@@ -95,11 +87,6 @@ extern  void    dm_gpio_change_rf_callback(struct 
work_struct *work);
 #endif
 
 
-
-/*--------------------Define export function prototype-----------------------*/
-
-
-/*---------------------Define local function prototype-----------------------*/
 // DM --> Rate Adaptive
 static void    dm_check_rate_adaptive(struct net_device *dev);
 
@@ -108,20 +95,12 @@ static     void    dm_init_bandwidth_autoswitch(struct 
net_device *dev);
 static void    dm_bandwidth_autoswitch(        struct net_device *dev);
 
 // DM --> TX power control
-//static       void    dm_initialize_txpower_tracking(struct net_device *dev);
-
 static void    dm_check_txpower_tracking(struct net_device *dev);
 
-
-
-//static       void    dm_txpower_reset_recovery(struct net_device *dev);
-
-
 // DM --> BB init gain restore
 #ifndef RTL8192U
 static void    dm_bb_initialgain_restore(struct net_device *dev);
 
-
 // DM --> BB init gain backup
 static void    dm_bb_initialgain_backup(struct net_device *dev);
 #endif
@@ -143,37 +122,29 @@ static    void    dm_check_edca_turbo(struct net_device 
*dev);
 // DM --> HW RF control
 static void    dm_check_rfctrl_gpio(struct net_device *dev);
 
-#ifndef RTL8190P
-//static       void    dm_gpio_change_rf(struct net_device *dev);
-#endif
 // DM --> Check PBC
 static void dm_check_pbc_gpio(struct net_device *dev);
 
-
 // DM --> Check current RX RF path state
 static void    dm_check_rx_path_selection(struct net_device *dev);
 static         void dm_init_rxpath_selection(struct net_device *dev);
 static void dm_rxpath_sel_byrssi(struct net_device *dev);
 
-
 // DM --> Fsync for broadcom ap
 static void dm_init_fsync(struct net_device *dev);
 static void dm_deInit_fsync(struct net_device *dev);
 
-//Added by vivi, 20080522
 static void    dm_check_txrateandretrycount(struct net_device *dev);
 
-/*---------------------Define local function prototype-----------------------*/
 
 /*---------------------Define of Tx Power Control For Near/Far Range 
--------*/   //Add by Jacken 2008/02/18
 static void    dm_init_dynamic_txpower(struct net_device *dev);
 static void    dm_dynamic_txpower(struct net_device *dev);
 
-
 // DM --> For rate adaptive and DIG, we must send RSSI to firmware
 static void dm_send_rssi_tofw(struct net_device *dev);
 static void    dm_ctstoself(struct net_device *dev);
-/*---------------------------Define function 
prototype------------------------*/
+
 
//================================================================================
 //     HW Dynamic mechanism interface.
 
//================================================================================
-- 
1.5.6.5


_______________________________________________
devel mailing list
[email protected]
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel

Reply via email to